Middle Stage Access Edfa Optical Amplifier

EDFA Optical Amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). Integrated VOA can be automatically adjusted to achieve smooth gain spectrum. It can amplify the C-Band signal with or w/o middle stage access (MSA), which brings great flexibility for the network application.

FUNCTIONï¼?
C-band optical signal overall amplification
Covering the wavelength range of 1528 ~ 1565nm
Support systems to achieve different cross-section radio repeater transmission

HIGHTLIGHT:
Wide operating wavelength range:1528nm~1565nm
Three Optical Amplifier C-Band applications: Booster , In-line, Pre-amplifier
Low noise figure: typical: 5dB
Excellent gain flatness
Multiple operating modes:
AGC adjustable Gain
APC output is adjustable
ACC voltage adjustable
Mid-stage access for DCM or OADM
Optional OSC channel for remote management
MON port, on-line monitoring optical power and OSNR

Many model options serve all the traditional amplifier applications in an extended optical link: booster, in-line, and pre-amplifier.

A booster amplifier operates at the transmission side of the link. It features high input power, high output power, and medium optical Gain . Boosters are designed to amplify aggregated optical input power for reach extension.

An in-line amplifier operates in the middle of an optical link. It features medium to low input power, high output power, high optical Gain , and a low noise figure. In-line amplifiers are designed for optical amplification between two network nodes on the main optical link.

A Pre-amplifier operates at the receiving end of an optical link. It features medium to low input power, medium output power, and medium Gain. Pre-amplifiers are designed for optical amplification to compensate for losses in a demultiplexer located near the optical receiver.

Some EDFA Models include an additional mid-stage port designed for insertion of a Dispersion Compensation Management (DCM) unit without its inherent insertion loss. The design of these models maximizes the DCM benefits to increase deployment flexibility. New placement options require fewer amplifiers in the link, and they can open the door to applications that were not possible with older technology.

EDFA Optical Amplifier 1U Rack
EDFA is the erbium-doped fiber amplification board. Its main function is to compensate the power of the signal optical in the transmission line, and it can amplify the optical signals of up to 48 channels with 100 GHZs interval) or 96 channels with 50 GHZ s interval) at C band at the same time. It has characters of flat gain, locked gain, low noise index, etc. It's an indispensable and important component for DWDM system, future high speed system and all-optical network long-distance transmission.

EDFA optical amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). This is a highly integrated EDFA, and the large module supports Dual amplifier with two independent gain units .

Wide operating wavelength range:1528nm~1565nm
Dual amplifier contains two independent gain units
Low noise figure: typ 5dB
Excellent gain flatness
Multiple operating modes:
AGC adjustable Gain
APC output is adjustable
Optional OSC channel for remote management
MON port, on-line monitoring optical power and OSNR

EDFA optical amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). This is a highly integrated EDFA, and the large module supports Dual amplifier with two independent gain units .

Wide operating wavelength range:1528nm~1565nm
Dual amplifier contains two independent gain units
Low noise figure: typ 5dB
Excellent gain flatness
Multiple operating modes:
AGC adjustable Gain
APC output is adjustable
Optional OSC channel for remote management
MON port, on-line monitoring optical power and OSNR

Single Fiber Bidirectional EDFA Amplifier models include a Red and a blue port designed for single fiber DWDM Solution. The design of these models is used for single-fiber DWDM transmission systems.

C-band optical signal overall amplification
Covering the wavelength range of 1528 ~ 1561nm
Support systems to achieve different cross-section radio repeater transmission

Operating wavelength range:
Blue: 1528nm~1543nm
Red: 1547nm~1561nm
Low noise figure: typ 5dB
Excellent gain flatness
Multiple operating modes:
AGC adjustable Gain
APC output is adjustable
ACC voltage adjustable
Mid-stage access for DCM or OADM
Offset the insertion loss introduced by DCM
Reduce the additional degradation of system OSNR
Flexible insertion of DCMs at different distances
Optional OSC channel for remote management
MON port, on-line monitoring optical power and OSNR

Single fiber bidirectional EDFA amplifier include an Red and blue port,
Red optical amplifier include an blue out port and blue in port, Red optical amplifier Amplify red optical signal, blue out port and blue in port are used to access the amplifier to amplify the blue optical signal.

Blue optical amplifier include an red out port and red in port, Blue optical amplifier Amplify blue optical signal, red out port and red in port are used to access the amplifier to amplify the red optical signal, Blue: 1528nm~1543nm. Red: 1547nm~1561nm.

HTF launched SOA series optical amplifier products can be 1290nm ~1320nm wavelength range to achieve amplification. It can be easily used in 100G transmission system, the maximum can support 160G/s rate. SOA optical amplifier can be used for booster amplification, pre-amplification and other occasions.

O-band optical signal overall amplification
Covering the wavelength range of 1290 ~ 1320nm
100G 1310nm signal amplification

Support O-band, 1290 ~ 1320nm band amplification
Output power up to 10dBm
100G 1310nm signal amplification
Support APC
Low noise, high gain
One board supports up to 2 channels of signal amplification

Eco-Friendly wooden sound amplifier device is one of the best sellers of Anh Duong Xanh. Cell Phone Stand with loudspeaker is used in any bathroom, bedroom, kitchen, or desktop office

Amplifiers


Packing in cartons.40" high cubic. Shipment by sea form Mumbai / jnpt port India.

Features:
1.built in adjustable Gain & Slope
2. Built in power supply
3. Connectors:"F"type female
4. Output test point and screw terminal for equippotential bonding
5. Metal-Plastic Housing For indoor mounting

Specifications:
ModelAS205S
No.of Inputs3UHF, 1BIII, 1BI+FM
No.of Outputs2
Frequency UHF1: (MHz)470óª862
UHF2: (MHz)470óª862
UHF3: (MHz)470óª862
BIII: (MHz)174óª230
BI+FM: (MHz)47óª68/88óª108
Gain(UHF1,UHF2,UHF3,BIII,BI+FM) (dB)20
Output Level(UHF1,UHF2,UHF3,BIII) (dBuv)115
BI+FM: (dBuv)110
Slope Adj. (dB)20
Slope Adj.ú¼Typical (dB)15
Return Loss (dB)_óª12
Noise Figure (dB)<6
Test Point Attenuation (dB)_óª20
Power Supply (Vac/Hz) 90óª260/47óª63
Max AC Pass Current(switchable) (mA)1200
DC Pass (V)18
Operating Temperature Range (¿¼C)-20óª+60.