Drain Tdag404 60

This aluminum drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc.
this particular product can be used in different places.
one is simple and do not need anything.
just put the face of drain up and it is done.
it has protective layer against acid and chemical products.
with insects' trap and p-trap and a basket

This aluminum drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc.
this particular product can be used in two ways.
one is simple and do not need anything.
just put the face of drain up and it is done.
another is usable by filling in with a piece of tile (which usually goes with the same as floor)
it has protective layer against acid and chemical products.
with insects' trap and p-trap and a basket

This aluminum drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc.
this particular product can be used in two ways.
one is simple and do not need anything.
just put the face of drain up and it is done.
another is usable by filling in with a piece of tile (which usually goes with the same as floor)
it has protective layer against acid and chemical products.
with insects' trap and p-trap and a basket

lined tile-in saranic drain middle outlet model tdasm 60
This aluminum drain is a perfect set for bathrooms and kitchens. it is also
usable in parking garages etc.
this particular product can be used in two ways.
one is simple and do not need anything.
just put the face of drain up and it is done.
another is usable by filling in with a piece of tile (which usually goes
with
the same as floor)
it has protective layer against acid and chemical products.
with insects' trap and p-trap and a basket
Material: Aluminum

Floor Slopped

High Water Discharge

P-trap Poppet & Junk Strainer

Protective Layer to Stabilize Finishing

Size 60 cm
2 mm Aluminum Sheet for Top & 4 mm for Body

lined tile-in saranic drain middle outlet model tdagm 60
This aluminum drain is a perfect set for bathrooms and kitchens. it is also
usable in parking garages etc.
this particular product can be used in two ways.
one is simple and do not need anything.
just put the face of drain up and it is done.
another is usable by filling in with a piece of tile (which usually goes with
the same as floor)
it has protective layer against acid and chemical products.
with insects' trap and p-trap and a basket

In co-operation with major manufacturers in Turkey, FALMER is able to supply a wide range of products, including construction chemicals.

Our aim is to supply the most excellent thermal insulation materials and construction chemicals and to bring them together with the end consumer. To contribute to the national economy by minimising the increasing energy demand of our world with our insulation materials.

WHITE SEALANT 450 GR
COLORED SEALANT 450 GR
SILICONE CLEAR 280 GR
POLYURETHANE LIQUID NAIL 450 GR
SILICONE-BASED JOINT FILLER 380 GR
CORNICE ADHESIVE 450 GR
STYROFOAM CORNICE ADHESIVE 450 GR
WOOD GLUE 100 GR
WOOD GLUE 350 GR
WOOD GLUE 700 GR
SPRAY PAINT INTERMEDIATE COLORS 200 ML (160 GR)
SPRAY PAINT INTERMEDIATE COLORS 400 ML (300 GR)
SPRAY PAINT METALLIC â?? GOLD 200 ML (160 GR)
SPRAY PAINT METALLIC â?? GOLD 400 ML (300 GR)
CLEAR VARNISH 200 ML (160 GR)
CLEAR VARNISH 400 ML (300 GR)
PAINT REMOVER 200 ML (160 GR)
PAINT REMOVER 400 ML (300 GR)
POLYURETHANE FOAM 600ML
SILICONE SPRAY 500 ML (380 GR)
BRAKE PAD AND CLUTCH CLEANER 500 ML (390 GR)
LABEL AND STICKER REMOVER 200 ML (160 GR)
LIQUID GREASE 200 ML (160 GR)
LIQUID GREASE 400 ML (350 GR)
RUST REMOVER 200 ML (170 GR)
RUST REMOVER 400 ML (320 GR)
G-60 LUBRICANT 200 ML (170 GR)
G-60 LUBRICANT 400 ML (320 GR)
FAST ADHESIVE 200 ML (35 GR JAPON)
FAST ADHESIVE 400 ML (75 GR JAPON)
MOLD RELEASE 400 ML (350 GR)
CHAIN LUBRICANT400 ML (350 GR)
WATERPROOFING SPRAY 400 ML (350 GR)
CHEMICAL ANCHOR
LIGHTER GAS 270 ML
CAMPING GAS 227GR
ZINC SPRAY 400ML (350GR)
GAS DUSTER SPRAY 400ML
DRAIN CLEANER (500 GR)
DRAIN CLEANER (1000 GR)
DRAIN CLEANER (2000 GR)

Ground improvement with vertical drains has been an accepted practice for improving soft clay deposits and has been widely used over the 60 years. The time required for the settlement to occur is considerably reduced as the length of the drainage path through soil is reduced. The vertical drains are required to have high permeability and sufficiently high drainage capacity so that pore water escapes in horizontal direction towards the nearest drain. The water then flows freely vertically along the drain to a drainage blanket placed on the soil surface or to a highly permeable layer above or below the clay layer. Prefabricated Vertical drains rains are composite in construction with an inner core wrapped in a non-woven geotextile fiber fabric. The inner core is of polypropylene and the filter fabrics are of polypropylene or polyester.

Sae 100 r14 stainless steel teflon hose is extremely versatile and are used in many applications across industires.Used in industries like transportation, aerospace, chemical transfer, pharmaceuticals and food handling.//
Stainless steel teflon hose has a very high operating temperature range, from -60 degreesâ  to +260 degrees. Chemical compatibility is the pre- dominant characteristic of the ptfe hose. In most of the areas, ptfe hose can withstand extreme temperature and varying pressure, exerted by different types of fluids.//
Construction of sae 100 r14 ptfe hose:
Inner core:smooth tube ptfe//
Cover:braided with stainless steel//
Hose size:1/8"-1.1/4"//
Feature:
Non-absorbent no-stick surface//
Non-contaminating//
Non-aging:no deterioration over time//
Reduces entrapment issues and build-up of deposits//
Available with carbon coating for non-conductive fluids or granulates//
Will not impart taste or odor//
Easy to drain & clean//
Chemical resistance allows for the handing of various fluids//
We are professional manufacturer of hydraulic hose and fittings.Main item include sae 100 r1, r2, r3, r4, r5, r6, r7, r8, r12, r13, r14, 4sp, 4sh, flexible ss hose and a large variety of hydraulic fittings, if you are interested in our products, please feel free to contact with us.

Beer fermentation tank is made by high quality stainless steel 304, the shell is cylindrical, it has big conical angle on the bottom , usually up to 60-75, in order to drain out and recycle yeast.

Beer fermenter is kind pressurized tank with working pressure 0.1MPA-0.15MPA, and fitted with pressure controlling and display settings, such as vacuum pressure relief valve, CO2 discharging pipe. Internal welds grounded and remove burs, finish polished less than 0.4um, easy to clean and no sanitary dead angle.

Prettech brewery tanks are heavy-duty made with high quality, the cutting and welding processing is made by laser machines, particularly for dimple jackets, it has a 0.35MPA working pressure supporting, the jacket covers on cylinder and conical,enough cooling area and high efficiency for beer chilling.

All Prettech fermenters are tested by leakage proof before delivery, fittings are strong, durable and sealed well, you will feel very happy and comfortable to use Prettech brewery tanks, make nice beer.

Technical Parameters:
Material:SS304
Finish: Exterior brushed, interior polished