Heater Silicon 320 G

Silicon rubber heaters have wire-wound or etched foil heating elements protected by
Fiberglass-reinforced silicon rubber vulcanized and compressed at high temperature and press.
They are thin, bendable and shaped to fit almost any equipment. Heat can be applied to the
Most complex shapes, geometries, curves and pipes conceivable without sacrificing efficiency or
Dependability.

Techical parameters:

1 maximum temperature resistance of insulator¦300íµ
2 maximum operation temperature¦ 250íµ
3 insulation resistance¦í²500 mª+/dc 1000v
4 breakdown voltage¦í² ac1500v/5s
5 capacity tolerance¦ía5%
6 temperature range: -60íµí¬250íµ continuous heating; heating element: available with either
Etched foil or wire-wound elements:
7 dimension:maximum 1.2míßxm minimun 15mmíß15mm; thickness 1.5mm¿thinnest 0.8mm¼
Thickest 4.5mmlead wire length:standard 130mm.

Installation:
1 with backing psa (pressure sensitive adhesive or called self adhesive, self stick adhesive)
As 3m psa
2 with vulcanization or curing and compression at high temperature and press
3 with spring and hole or eyelet
4 with clamps

Benefits:
1 heating evenly, accurate and adjustable
2 various shapes, holes, cutouts, profiled watt densities and multiple voltages
3 put heat exactly where it is required
4 high dielectric strength, flexibility, bendable and cost effectiveness.
5 resistance to temperature extremes, moisture, weathering, radiation, fungus and chemical
Attack

Silicon rubber heaters have wire-wound or etched foil heating elements protected by
Fiberglass-reinforced silicon rubber vulcanized and compressed at high temperature and press.
They are thin, bendable and shaped to fit almost any equipment. Heat can be applied to the
Most complex shapes, geometries, curves and pipes conceivable without sacrificing efficiency or
Dependability.

Techical parameters:

1 maximum temperature resistance of insulatorú¦300íµ
2 maximum operation temperatureú¦ 250íµ
3 insulation resistanceú¦í²500 mª+/dc 1000v
4 breakdown voltageú¦í² ac1500v/5s
5 capacity toleranceú¦ía5%
6 temperature range: -60íµí¬250íµ continuous heating; heating element: available with either
Etched foil or wire-wound elements:
7 dimension:maximum 1.2míßxm minimun 15mmíß15mm; thickness 1.5mmú¿thinnest 0.8mmú¼
Thickest 4.5mmlead wire length:standard 130mm.


Installation:
1 with backing psa (pressure sensitive adhesive or called self adhesive, self stick adhesive)
As 3m psa
2 with vulcanization or curing and compression at high temperature and press
3 with spring and hole or eyelet
4 with clamps


Benefits:
1 heating evenly, accurate and adjustable
2 various shapes, holes, cutouts, profiled watt densities and multiple voltages
3 put heat exactly where it is required
4 high dielectric strength, flexibility, bendable and cost effectiveness.
5 resistance to temperature extremes, moisture, weathering, radiation, fungus and chemical
Attack
6 heat can be applied to the most complex shapes, geometries, curves and pipes conceivable
Without sacrificing efficiency or dependability.
7 easily bonded and/or mechanically mounted, even onto the curving surface.

Silicon carbide elements are used today in the melting of glass and non-ferrous metal, heat treatment of metals, float glass production, production of ceramics and electronics components, igniters in pilot lights for gas heaters, etc


Origin - India and China



For price, specification and other details please contact us.

Silicon Carbide Rod Silicon carbide SiC heating element Specifications
1. High working temperature: 1400C.
2. Long time last.
3. Varous type available. Rod, U, W, Single Spiral, Double Spiral
Our SiC heating elements Advantage .

1. High working temperature: 1500C (Surface Temperature)

2. Various shapes: Rod, U, W, Single Spiral, Doule Spiral shapes are availible.

3. Large size range: Diameter 14-54mm, Length 200-4500mm.

4. Fast Delivery: Normal quantity can be ready in 10 days.

5. Very competitive prices.

Our SiC heating elements Standard Sizes .
High Temperature Silicon Carbide Rod Sic Heating Element

Silicon Carbide heating elements are used in many of our high temperature furnaces and kilns
Available in a wide range of shapes and sizes
Self-supporting, they can be used in furnaces that are too wide or too long to be spanned by metallic or MoSi2 heating elements
Capable of higher operating temperatures and higher watt loadings than metallic elements
Relatively easy to change while the furnace is hot

1. Application of liquid silicon rubber for toe spreaders:
The product is a two component high elongation silicone gel designed for silicone food care products, such as silicone insole.Q
This product cured at room temperature to a soft track gel with the addition of curing agent. The soft nature and cushioning effect offer this product provides excellent protection for our food health care.


2. Aadvantages of liquid silicon rubber for toe spreaders:
1. High transparency. 
2. High fluidity, high curing rate. 
3. Pressure release. 
4. Shock absorption. 
5. Multiple density

3. Datasheet of liquid silicon rubber for toe spreaders:

Model Q625# Q630#
Appearance Transparent Transparent
Mixing Ratio 1:1 1:1
Operating time (Mins 25¡ãC) 30 -50 30 -50
Curing time (H 25¡ãC) 3 - 5 3 - 5
Curing time (Mins 60¡ãC) 20 - 30 20 - 30
Hardness (A¡ã) 25¡¨¤2 30¡¨¤2
Density ( g/cm 3 ) 1.08 1.08
Viscosity (CS) (After mixed) 8000 ¡¨¤ 500 8500 ¡¨¤ 500
Tensile-strength( kgf /cm2 ) 45 ¡¨¤ 5 45 ¡¨¤ 5
Tear-strength (kgf /cm2 ) 14 ¡¨¤ 2 17 ¡¨¤ 2
Elongation-break(%) 450 ¡¨¤ 50 400 ¡¨¤ 50
Retractility(%) ¡¨¹0.1 ¡¨¹0.1
 
 
  







4. Package and storage of liquid silicon for  Toe Spreaders:
1). 20kg or 200kg /drum.
2). It is a kind of non-dangerous goods, and it should be stored at a cool and dry place, please keep it from sun and rain.
 
 
Place of Origin: Guangdong China
Brand Name: Hong Ye silicone rubber
Minimum Order Quantity: 200 Kilogram
Delivery Time:  within 3 days after payment confirmed in our bank.
Supply Ability: 8 Tons per Day 
Payment Terms: L/C, T/T, Western Union
Price Terms: FOB, EXW, CIF, CNF
Packaging Detail: 1kg/Jar,5kgs/Jar,20kg/drum,25kgs/drum,200kgs/drum

Further information for silicon  Toe Spreaders, please feel free to contact Miss COCO:
Website: http://www.szrl.net
Tel: +86 -0755-89948294
FAX: +86-0755-89948030


5kg/pail; 20kg/pail; 25kg/pail; 200kg/pail

1.Product Description
YJS-720 two components platinum cured silicone with 1:1 mixing ratio by weight. It is soft food grade silicone, 
with 20 Shore A hardness, which is suitable used for moulding chocolate & icing sugar, candy, cakes, fondant.
 
2.Features:
A. Amazing fluidity and easy to operate
A. Platinum-based, food-grade silicone (environmental friendly, odorless and non-toxic)
B. Delicate design available
C. Mixing ration: 1:1, easy to mix
D. Easy de-molding
E. Excellent tension and tear strength
F. High performance in duplication
G. Shrinkage is almost zero (below 0.1)
H. Excellent resistance to weather, temperature, aging, acid and aging-proofing.
I. High resistance to high temperature and aging(resist -60 to 250)
J. Food safe

3.Technical Data
Typical general characteristics Inspection Method Value
Product data (Catalyzed A+B) YJS-720
Hardness Shore A 20±2
Mix Ratio A:B 1:1/10:1
Color / translucent
Pot life 25 °C (77F) 30-40mins
Curing time 25 °C (77F) 3-4 hours
Mixed viscosity mPa.s 5000±1000
Tear-strength kg/cm 20±2
Tensile-strength M.pa 4.0±1.0
Elongation % 500±50
Shrinkage % â?¤0.1%

4.Appearance:
Part A: a non-toxic and odorless liquid with translucent color and platinum inside
Part B: a non-toxic and odorless liquid with translucent color.
ATT: We can do any curing time as your requirements.
 
Notice:
What is the hardness should I choose
Normally 5~55 Shore A will be the best, but it also should according to your size and pattern design.

5.SHELF LIFE:
When stored at or below 32°C (89.6°F) in the original unopened containers, G-8 series Silicone have a usable life of 12 months.

6.Package
1kg/drum; 20kg/drum;25kg/drum;200kg/drum.

PRODUCT NAME: Agricultural Silicone Trisiloxano adjuvant

TEST ITEM SPECIFICATIONS INSPECTION RESULTS
Appearance light amber liquid light amber liquid
Viscosity, 25°C,mm2/s 20-61 30
Surface Tension, 25°C,mN/m 20.0-23.0 21.3
Specific Gravity, 25°C, g/cm3 1.001-1.050 1.015
RRESULTS: Up to the standard
 
whatsapp/tel/ 8614707090699

QS-308 spray adjuvant is a super-spreading surfactant based on a trisiloxane ethoxylate. QS-308 spray adjuvant lowers the surface tension of spray solutions, beyond that which is achievable with conventional adjuvants.
Typically, QS-308 spray adjuvant (@ 0.1 wt %) gives an aqueous surface tension of