Hepa Filter With Separators

Philosophy



1170*570*50mm
0.036m3

1)Material and operation condition
media: glass fiber
sealant: pu two-componet / polyurethane ruber
frame: aluminum/galvanized/stainless steel/plastic
seperator: EVA hot melt bead
efficiency: 99.99%~99.9995% 0.3μm
max.temperature: 70°C
max.humidity: 100%
gasket: endless gasket/EVA/neoprene

2)Product features
1. It is use patent technology to ensure the fully use of V-type passage.
2.The frame is extruded and anodized aluminum.
3.Using the special seamless sealing technology,the effect is lasting for a long time,the airflow is even.

3).Design: As required by the Buyer.

Pass box

Pass box is a kind of assistant equipment for clean room. Mainly be used in passing the small articles between clean room and clean room, unclean room and clean room, which reduce the times of opening door and minimize the pollution extent.
Characteristic: 1. It is adopted the stainless steel inside, which is flat, neat and wearable. The
surface material of pass box is cold rolled steel or stainless steel.
2. Doors in two sides with machinery or electronic interlock device makes two doors can't
be in the open state at the same time
3. The cabinet in two sides with interphone is convenient to pass the things
4. Pass box with special seal stripe guarantee the air-proof
5. Adopt light with ultraviolet sterilization (choice)



600d*400w*600h

Deep-pleat coarse filter

Synthetic pocket filter

The primary bag filter is used in holding up big diameter's dust, and it adopts new kind of multiple non-woven and synthetic fiber media and make abg type which have characteristic of low resistance, high dust holding capacity
Characteristic:
It's the normal prefilter for air conditioner system in the occasion where there is much dust
Adopts good quality's synthetic media with high dust holding capacity
It has efficiency of filtration area big, resisistance low and life-span long
Adopts metal frame to ensure its quality
Quality is tested by the individual organization vvt
Filtration efficiency (tested by weighing dust): 90-92% (ashrae50, 1-1992)
Efficiency rates: g3, g4 (en799)
Application:
The primary bag filter is suitable for pre-filtration for air conditioner system, and widely used in pharmacy factory, hospital, electronic factory, food factory, etc. If you choose it as your first pre-filtration, it could lighten charge of medium and hepa filter and could prolong the life-span
Washable metal mesh air filter, suitable for filtrating big diameter of dust
Nicole

Fan filter unit

FFU can be used by connecting module. It is widely used at the occasion such as clean room,
clean production line.
The FFU have prefilter and HEPA filter two layers filter net. The air is taken in from the top
of FFU by fan and then is filtered by prefilter and HEPA filter. The clean wind will be send
and the wind speed is 0.45+/-0.2m/s.
Characteristic: 1.The FFU matches centrifugal fan that is durable, low vibration and noise,
adjustable air velocity, stable capability and air velocity. The fan's life p-span is more than
50 thousand hours.
2. It is suitable to assemble the production line. It can dispose to be used as single set
according to crafts need and also can connect several sets to be 100 rank production lines.
3. The material is stainless steel, aluminum or cold rolled steel which is beautiful and prevent
to rust.
3. In order to ensure the quality of product, FFU will be inspected by particle counter before
out of factory according America Federal Standard 209E.
Yours faithfully
Nicole


1175mm*575mm*350mm, 35kg, 0.252m3

Mini pleat construction with Al frame
Glass fiver media pack
EN1822 H12 and H13 grade
MPPS 99.97% ~ 99.99%

Nuclear HEPA Filter.

Compared with glass fiber filter and PP filter media,PTFE HEPA filter/ ULPA filter media has great advantages, such as extremely low chemical gas dispersion, better uniform fiber distribution, smaller fiber diameter and pore size. These features can greatly reduce filtration resistance and improve filtration performance, thereby greatly reducing energy consumption.

Product Introduction
Frame: Aluminium alloy / Galvanized steel/Stainless steel
Media: Polytetrafluoroethylene (PTFE)
Media guard: Paint finished expanded mesh
Standard Frame thickness: 55mm, 70mm (Non standard thickness can be customized)
Design: Panel type
Maximum temperature: 250 C
Maximum relative humidity: 100%
Filtration efficiency:
HEPA
MPPS
MPPS
ULPA
MPPS:
MPPS

Product Feature
1. High toughness, strong damage resistance, in harsh environments, with excellent acid resistance (including Fluoric acid), alkali resistance, resistance to organic substances.
2. Low volatility (boron-free) clean material, reducing the release of impurity waste gas (boron, potassium, silicon, etc.); no metal pollutants.
3. Compared with ordinary glass fiber materials, the pressure loss is reduced by about 40%, which reduces energy consumption, saves space and reduces weight.
4. Lightweight, good sealing, compact structure, easy installation, high efficiency, low resistance and low operating cost.

Product Applications
PTFE HEPA filter/ ULPA filter is widely used in semiconductor, electronics, precision manufacturing, bio-pharmaceutical and other industries.