Here are some general features that you might find in KARL STORZ laparoscopes:
Diameter: Laparoscopes come in different diameters, and the choice depends on the specific surgical procedure and patient anatomy. Common diameters include 5mm and 10mm.
Angle of View: The angle of view is an important parameter. For instance, a laparoscope with a 30-degree angle provides a wide field of view, while a 0-degree laparoscope offers a straight-ahead view.
Autoclavable: Many laparoscopes are designed to be autoclaved, allowing for sterilization and reuse.
Optics: High-quality optics are crucial for clear visualization during surgery. KARL STORZ laparoscopes typically feature advanced optics for improved image quality.
Light Transmission: Efficient light transmission is essential for illuminating the surgical field. LED or xenon light sources are often used for this purpose.
Safety Insulin Syringe with Restractable Needle
Safety Characteristics: after absorbing the expected dose of liquid medicine, if transportation is needed, push up the sliding-sleeve to protect the needle tip from physical damage during transportation; push the sliding sleeve to expose the needle tip before the injection starts, when the expected dose of liquid medicine is 100% injected, manually slide the sliding sleeve to the position where the connector base can no longer slide, the needle tip is completely covered in the sliding sleeve, and then the sliding sleeve is manually rotated until it is locked, it could effectively preventing repeated use and accidental needle sticking, and avoiding cross infection.
The Hem-o-lok Ligating Clip System, produced by Teleflex under the Weck brand, is a medical device used in surgical procedures for the ligation (closing off) of vessels or tissue structures. The Hem-o-lok clips are commonly utilized in laparoscopic and robotic surgeries.
Key features and aspects of the Teleflex Weck Hem-o-lok Ligating Clip System include:
Material: The clips are typically made from a polymer material, providing a secure and reliable closure when applied to vessels or tissues.
Design: Hem-o-lok clips are designed to be easy to use, with a simple mechanism for application. They are available in various sizes to accommodate different surgical needs.
Application: Surgeons use Hem-o-lok clips to occlude or ligate blood vessels or other structures during surgery. These clips are widely used in minimally invasive procedures, such as laparoscopic and robotic surgeries.
Secure Closure: The design of the clips aims to provide a secure closure, preventing bleeding or leakage from the ligated structures.
Color Coding: The clips are often color-coded according to size for easy identification during surgery, allowing surgeons to choose the appropriate clip for the vessel or tissue being ligated.
The Excelsior SL-10 Microcatheter with Thin Wall Technology and Lubricious Hydrolene�® Outer Surface is designed to provide outstanding performance
1.7F (0.56mm) Low Profile Distal Shaft, Excelsior SL-10 Microcatheter is designed with a low profile tip to enhance access to distal vasculature and ease of passage of the catheter trip through stent interstices.
Atraumatic Distal Tip, Specifically engineered for atraumatic access, the rounded, low-durometer, unbraided tip offers exceptional softness and flexibility.
Variety of Tip Shapes, Offered in six clinically relevant shapes to improve access and navigability.
Guide wires are commonly used in medical procedures, particularly in cardiology and radiology, to guide catheters and other devices through blood vessels or other anatomical structures. The Terumo Radifocus Guide Wire M is likely designed for use in vascular interventions.
Here are some general characteristics you might find in Terumo guide wires:
Material: Guide wires are typically made of materials such as stainless steel or nitinol.
Coating: Some guide wires may have hydrophilic or hydrophobic coatings to enhance their performance during navigation through blood vessels.
Tip Design: The tip design may vary based on the intended application, with options like floppy or stiff tips.
Diameter and Length: Guide wires come in various diameters and lengths to suit different procedures and anatomies.
Radiopaque Markers: Radiopaque markers help visualize the position of the guide wire under fluoroscopy.
the Cordis Emerald Guidewire is a product developed by Cordis Corporation, a subsidiary of Cardinal Health. Guidewires are medical devices used in various interventional procedures to navigate through blood vessels, providing access for other devices and treatments.
Key features of the Cordis Emerald Guidewire may include:
Material: The guidewire is typically made from materials like stainless steel or nitinol, which offer flexibility and support for navigating through the vascular system.
Coating: Guidewires may have hydrophilic or hydrophobic coatings to enhance their lubricity, making it easier for them to pass through blood vessels.
Tip Design: The tip of the guidewire is often designed to be atraumatic, reducing the risk of vessel injury during navigation.
Radiopacity: The guidewire is often designed with radiopaque markers to aid in fluoroscopic visualization during procedures.
Length and Diameter: Guidewires come in various lengths and diameters to suit different procedures and anatomies.
Teremo 3-part tuberculin syringe with mounted needle, sterile, for single use (Ref: 3TS-1ML)
Teremo 3-part insulin syringe with integrated needle, sterile, for single use (Ref: 3IS-1ML)
Product characteristics
Needle
Hub and protector : Medical class polypropylene
Cannula : Stainless steel
Size : 29Gx1/2 (0.33 x 13 mm)
Syringes are not resistant to UV radiation.
Needles are coated with silicone to have good sharpness and for protection of the needle.
Syringes
Material barrier: : Polypropylene (PP)
Plunger : Polypropylene (PP)
Piston : Isoprene (Latex-Free)
Sizes : 1 ml
Graduation 3TS-1ML : 0.02 ml
Graduation 3IS-1ML : 0.025 ml
Tooling parameters for raw materials
Limit for extractable metals : Total £ 5 Âg/ml, Cd 0.1 Âg/ml
Limits for acidity or alkalinity : pH £ 1 pH
Oxidized material : KMnO4 consumption 0.5 ml
Method of sterilization : EtO gas
Non-toxic, non-pyrogenic
This product is intended to be used for hypodermic injection and fluid drawing.
If the single package is opened before use, discard it immediately and do not use it. Take care not to
contaminate the product during unpacking. The product is limited for single use and after use it must be
discarded immediately.
The product remains sterile for a period of 5 years after sterilization, provided that it is kept under
specified storage conditions. Do not use after expiry date
Product is phthalates and latex-free.
Packing
Per piece in sterile blister packing, 100 pieces in an inner box, 32 inner boxes in an export carton
