DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Features:
-100% Waterproof and weather-resistant
-UV-resistant and anti-aging
-Tear-resistant and flame-retardant (optional)
-Excellent flexibility and strength
-Long-lasting durability (3-5 years under proper use)
Applications:
-Truck and container covers
-Industrial and construction site covers
-Agricultural uses (shade, ground cover, etc.)
-Outdoor tents, awnings, and canopies
-Swimming pool covers and water containment
-Packaging: Rolls or folded in bales/cartons, customized labeling available
-Export Markets: Currently exporting to Europe, Middle East, and Asia
INDO wagon covers provides perfect protection against dirt, dust and moisture. It also protects your valuable goods from blazing sun-light and rains.
HDPE coated INDO wagon covers are made of woven polyethylene fabrics of high mesh count. With the thickness from 85 GSM up to 500 GSM these covers are tear-resistant, puncture and mild impact resistant. It's smooth surface also protects your valuable goods from scratches and other damages.
Available in standard wagon sizes as per international standards. We also provide customized sizes as per customer requirements.
High Tensile strength
Tear and Puncture resistant
High Impact resistant
Outstanding UV and stress-cracking resistance
Excellent chemical and Corrosion resistant
Flexible and easy to install
More than 7 years self-life
INDO brand truck & trailer covers provides perfect protection against dirt, dust and moisture. It also protects your valuable goods from blazing sun-light and rains.
HDPE coated INDO truck covers are made of woven polyethylene fabrics of high mesh count. With the thickness above 150 GSM these covers are tear-resistant, puncture and mild impact resistant. Itâ??s smooth surface also protects your valuable goods from scratches and other damages.
Available in standard truck and trailer sizes as per international standards. We also provide customized sizes as per customer requirements.
High Tensile strength
Tear and Puncture resistance
High Impact resistance
Outstanding UV and stress-cracking resistance
Highly Durable, tear proof and mild impact proof
More than 7 years self-life
PVC Tarpaulin Made of Polyester woven fabric with PVC coating in single/both sides offered is made available by us with Some of the common application of these tarpaulins include as vehicle covers s in trucks as well as in other general purpose applications. Here, our expertise lies in making these available in a multitude of colours, and weave options as well as in U.V. resistant finish as desired by the customers. Further, we can deliver these in measurements as desired by the customers.
The equipment adopts the resistance heating in the vacuum chamber, to melt and vaporize the metal wire (aluminum wire) cling to the resistance wire. The vaporized metal molecule deposit on the substrates, to gain the smooth film as well as high reflectivity. Thus the surface of the items can be decorated and beautified.
Characteristic: reasonable structure, even film, good-quality film forming, quick pumping speed, the cycle of short, high efficiency and easy operation, low energy consumption and performance advantages of stability.
Applied industry: Widely used in automotive, audio and various small appliances, computers, clocks and watches, toys, cell phones, reflective Cup, cosmetics, toys, tableware, sanitary ware, shoe heel, ABS, PS, PP, PC, PVC, PET, nylon, metal, Boli, glass, ceramics, TPU, etc.
Electroplating effects: general electroplating-face, dumb-(semi-mute, all dumb), the electroplating process wrinkles, lampworking, raindrops, seven colors
Coating color:gold, silver, red, blue, green, purple, multi color, and so on.
Coating color: gold, silver, red, blue, green, purple, and so on.
All vacuum coating machines are environmental prodection products and sooner or later will replace traditional galvanization industrial.
Technical parameter:
Mode
Dimension
ZZ-1200
ZZ-1400
ZZ-1600
ZZ-1800
1200*1400mm
1400*1600mm
1600*1800mm
1800*2000mm
Mainly Application
Plastic decorative coating , glass decorative coating and protective film coating
Film Type
Semitransparent film, non-conducting film, gold, silver, red, blue, green, purple, seven color, etc.
Power source Type
Thermal evaporation power, ion bombard power, RF power
Vacuum chamber structure
Vertical double/single door, horizontal single door, pump system postposition
Ultimate vacuum
8.0*10-3Pa
Vacuum system
Diffusion pump +Roots pump +Mechanical pump +Holding pump
Pump time
Pump from atmosphere to 5.0*10-2, 6 minutes
Workpiece motion mode
Public rotation/Frequency control
Control mode
Manual/Automatic all-in-one mode, Touching screen+PLC
compress air
the pressure is 5~6kg.
water-cooling system
Cool water 5~25 supplier, the flux is 5T/H and the pressure is 0.15~0.25MPa.
Features
Bright delicate aluminum coating, coating speed, simple operation, equipment stability, and the production of high-grade plastic decoration products indispensable a necessary equipmen
