Mppt Hybrid Solar Power System Inverter

5 kva off and on grid
max efficiency to 98%
wide input voltage range
high efficient MPPT
lcd display
small and light
easy to install

FEATURES
â?¢� � � � � � �  Automatic parallel configuration Black start

Wide range of inverter capability, from 80 - 750V Embedded high accurate SoC / SoH algorithm

Wide range compatible with main -stream inverters, various protocols embedded

Quick stackable plug-in design
Outdoor & Indoor (IP55)

 

 

















Battery Module Quantity
2

4

6


Total Capacity


50 Ah




Nominal Voltage Size
204.8V

409.6V

614.4 V


Size
560*400*735mm

560*400*1199 mm

560*400*1663 mm


Total Energy
10.2 kWh

20.4 kWh

30.7 kWh


Rated Charge / Discharge Current


30 A.0.6c




Weight
148.1 kg

266.8 kg

385.2 kg


Design Cycle Life


6000, 0.5C at 25â??C, 80% DOD, 80% SOH




Operating Temperature

Charging Temperature : -5�°C 55 %

Discharge Temperature : -15 % 55�°C



Storage Temperature


-15 % -55â??C




Self-Discharge Rate of Module


<2% per month, at 27 %




Max. Parallel Capacity


307 kWh




Ingress Protection


IPSS, in stacked up state




Certificates & Standards


IEC 62619 / EN 61000-6-3/ UN38.3/ RoHS, REACH





 

Technical Features:
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance.
2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection.
3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance.
4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set.
5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load.
6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%.
7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load.
9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock.
10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%.
11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
12, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries
13, Solar controller adopt IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system
14, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least
15, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments
16, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time
17, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient.
18, The controller also has temperature compensation function and RTC real time clock function,

Model Number:SUN600G3 800G3 1000G3-230-EU
Input Voltage: Maximum 60V
Output Voltage: 230V 184-265V
Output Type: Single phase
Size: 212W 230H 40D
Inverter Efficiency: 96.5%
Warranty: 10 years
Weight: 3.15kgs
Recommended Input Power (STC): 210-500W (2 Pieces)
Max. DC Input Voltage (V): 60V
Rated Output Power (W): 600W 800W 1000W
Max. Output Power (W): 660W 880W 1100W
Nominal Voltage Range: 230V 184-265V
Operating Phase:Single Phase
Number of MPP Trackers: 2
Communication: Powerline Wifi Zigbee

Functional characteristics:

It has the function of segmented charging and discharging.
Backflow prevention and grid connection function.
Insulation resistance and leakage current detection function.
Working without battery under special conditions.
Lithium battery activation function, which can be triggered by mains or PV.
Power saving mode, reduce no-load loss.
.Four charging modes: PV Only, Mains Priority, PV Priority and PV&Mains hybrid charging.
Two output modes: mains bypass and inverter output, with UPS function.
360 all-round protection.
Allow lead-acid battery and lithium battery access.
ON/OFF switch controls the inverter AC output
Grid-connected mode can be set.

Design characteristics:

Adopting full-digital double closed loop control, combined with advanced SPWM.technology and pure sine wave output.
Advanced MPPT technology with efficiency of 99.9.
LCD screen and three LED indicator lights can clearly indicate the status and data.
Intelligent and variable-speed fan, efficiently dissipate heat and extend system life.
Multiple safety protection functions: short circuit protection, overload protection,reverse polarity protection and so on.

Our High-efficiency solar panels can produce 7.8KWh of daily output power under full sunshine, which can meet the daily basic electricity demand. Easy to use, suitable for off grid shop,garage,shed and remote agriculture.

We offer from basic offline systems and systems that meet the demand required at a residential and industrial level.

National delivery and international service, incoterms: EXW, FOB, CFR & CIF.

Advanced encapsulation material with multi-layered sheet laminations enhance cell performance and provide a long service life;By-pass diodes are pre-installed in waterproof IP-65 rated juncton box to minimize power drop caused by shade and ensure excellent performance in low-light environment.

The intelligent charger regulator is suitable for lead-acid, gel battery. Solar controller has short-circuit,open-circuit,reverse and ver-load protection,improve solar system efficiency and prolong the life span of the battery. LCD display indicate the status and data, easy to read.

The value price is according to the reference and solar generation equipment that is required...

Introduction:
The HES series is equipped with a time-slot charging and discharging function, which allows users to set different charging and discharging periods according to the local peak and valley tariffs, so that the utility power and PV energy can be used rationally.

COMMUNICATION:
Embedded Interfaces: RS485 / CAN / USB / Dry contact
External Modulesï¼?Optionalï¼?Wi-Fi / GPRS

Time-slot charging/discharging function
When mains electricity is expensive, the battery inverter is used to carry the load; when the mains electricity is cheap, the mains electricity is used to carry the load and charge, which can help customers to save electricity costs to the greatest extent

Time-slot Mains Charging/Carrying Function
With 3 definable periods, the user can freely set the mains charging/carrying time within the range of 00:00 to 23:59. During the time period set by the user, if PV energy is available, PV energy will be used first, and if PV energy is not available or insufficient, utility energy will be used as a supplement.

Time-slot Battery Discharging Function
With 3 definable time periods, users can freely set the battery discharge time within the range of 00:00 to 23:59. During the time period set by the user, the inverter will give priority to the battery inverter to carry the load, and if the battery power is insufficient, the inverter will automatically switch to mains power to ensure stable operation of the load.

SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, TV, electric fans and other industrial power supply.
Technical Features:
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance.
2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection.
3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance.
4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set.
5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control.
6, The output voltage can be set between -40 % to +20 % of rated voltage.
7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load.
9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock.
10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%.
11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.

Introduction:
The HES series is equipped with a time-slot charging and discharging function, which allows users to set different charging and discharging periods according to the local peak and valley tariffs, so that the utility power and PV energy can be used rationally.
Advantage:
ï?¬ Efficient
Advanced MPPT technology with up to 99.9% efficiency
Up to 22A PV input current perfect for high power
ï?¬ Reliable
Outputs high quality pure sine wave AC power
8-10kW load power to meet the needs of most
ï?¬ User-friendly
Industrial design with a modern aesthetic look
Easy to install and simple to use
ï?¬ Safety
360 degrees of security from hardware to software
EU and North American safety approvals
ï?¬ All-in-one
Solar Charger Controller up to 100A charging current
Support for Li-ion battery BMS communication
ï?¬ Intelligent
Exclusive Li-ion battery BMS dual activation
Time-slot function to save cost with peak-valley tariff

Essential details
Place of Origin: China
Model Number: SR-HES4855S100-H
Input Voltage: 500vdc
Output Voltage: 230Vac
Output Current: 100A
Output Frequency: 50Hz/ 60Hz
Output Type: Single
Size: 556MM*345MM*182MM
Type: DC/AC Inverters
Inverter Efficiency: 95%
Certificate: CE/RHOS/IEC
Warranty: 5 years
Weight: 20kg
Inverter type: On-grid and off-grid Solar Inverter
Rated power: 5500w
Protection: IP65
MPPT Efficiency: 98-99%
Display: LCD
Communication: WIFI / RS485
Battery type: Lead Acid \ Lithium \ Gel
Battery Voltage: 48 VDC
Peak power: 11000W
Color: White+Black