Pa66 Filaments For Combs,polishing Brushes

Stain Varnish Are Stainers For Wooden Structures -apply On Natural Wood And Mdf Wood Skinned Structures

Isolator A, Isolator B, Ritver Polyester Sealer,polyester Topcoat White-vertical, Horizontal, Polyester Catalyst,accelerator

PU Anti-bacterial Wood Polish And Paint
PU Sealer Anti-bacterial
CATALYST 50% CO15

Multicoat Clear Parquet Wooden Floor Polish

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

Our polyurethane coatings for wood are available in both one-component (ready-to-use) and two-component (requires blending of hardener and resin) forms. Multi-layered applications, followed by expert polishing or buffing, yield a sophisticated, lasting sheen, tailored to your desired level of gloss.

Hollow PET/PBT Filament
Dia: 0.18~0.30mm
Solid Filament
Dia: 0.06~0.25mm
Flagged Filament
Tapered Filament
Color: White, black, brown, grey, orange, etc


25kg/ctn

Product Description

·Made in China
·Made from natural white bristle mixed Hollow filaments
·Thicker head for excellent paint pick up, release with a high painting effect
·Easy washing, fast cleaning
·Tin plated ferrule and natural hard wooden handle with yellow color, black tip
·Suitable for use in all paints

Available in the following size:
1'', 1.5'', 2'', 2.5'', 3'', 4'' , 5''

Polishing brush