Automotive Trainer System Model

1. Product Car Engine Ignition System Trainer Automotive device details

The device uses six engines for ignition (including: common system; Hall type electronic ignition system; Magnetoelectric ignition system; Homologous system without emitter, in addition, independent self-ignition system without emitter). ... The structure and process of the school are fully demonstrated to meet the needs of secondary and higher education, general education schools and educational educational theory and maintenance equipment.

Function of

1. Six typical Motorzungssystem e, which carries out electronic performance appraisal system is Kontaktzundsystem, Hall-zundsystem, this is from Induktionszundsystem photoelektrische Induktionszundsystem Nichtverteilergruppenzundungssystem and Nichtverteiler fully demonstrate that the composition and 49 years of power are not independent of Zundsystems.



2. The teaching board is equipped with 4 mm thick anti-corrosion, anti-pollution, smokeless, fire-free and humidity grade high quality plastic sheet, the surface is sprayed with special procedures; Indelible color circuit diagrams are printed on the panels to train trainees to compare directly with prototypes to understand and analyze the functional principles of different ignition systems.



3. Take a look at the panel of the control board. Detection devices are installed on the control board.



4. The half piece of Car Engine Ignition System Trainer Automotive device model plate is 1.5 mm thick, which is really a good-looking duralumin frame. The bottom coil is welded with steel and the surface is treated with a self-locking coil device.



5. The Teaching committee uses a standard power supply 220V ACV part of the network, which is converted to 12V DC power through internal transfer payment machines and fair judge. The lack of batteries can reduce the problem of rechargeable batteries. The 12V DC network set provides the blocking function



6. Configure a smart error matching system.

Process Standard:

The circuit board has the function of circuit analysis. The graphic circuit is made of aluminum-plastic plate by laser spraying. The circuit distribution is reasonable. The electrical installation is organized and implemented in strict accordance with GB national electrical industry standard.



Skills Training Program:

1. Safety operation training of power battery

2. Practical training of power battery structure

3. Practical training on BMS structure of power battery

4. Practical training on disassembly and assembly of power battery sealing strip

5. Power battery pack replacement training



Testing Teaching Project:

1. Power battery safety test items

2. Sealing test items of power battery

3. Power battery voltage detection items

4. Power battery temperature detection items



Experimental Items:

1. Power battery capacity test and capacity data analysis experiment.

2. Data analysis of power battery discharge current and charging current.

3. Power battery temperature test and over temperature protection test.

4. BMS data diagnosis, data analysis and data monitoring experiment.

5. Charge and discharge experiment of lithium battery.



Our Service:

1. Befor-sale services: We offer 24 hours online inquiry service, if you have any question of the equipment parameter, please feel free to contract us.



2. Sale service: Products must be inspected strictly before being sold,clients are invited to simulate and test equipment on the spot; in accordance with the agreements stipulated in the contract, and then we are arrange delivery the machine



3. After-sale service: Our company will offer the professional engineer to guide installation,training how to operation the equipment.



4. We are design and product machines according to the speciall requirement by clients.



5. Quality guarantee term is for one year. Malfunctions which are caused by machine-self and quality will be responsible for our manufacturer. Other malfunctions which are caused by operation mistakes, man-made problems, etc will be responsible for clients-self.



Hot Tags: automotive power system training equipment, China, manufacturers, suppliers, engineering, OEM, ODM, Automotive Trainer System Model, Dissected Diesel Engine Parts, automotive steering model, other auto electrical system, cutaway transmission, power system of gasoline-gas dual-fuel vehicle

Warranty:
12 months
Model Number:
RSTM260-J
Type:
Synchronous Motor
Frequency:
200
Phase:
Three-phase
Protect Feature:
Waterproof
AC Voltage:
380VDC
Motor Rated:
25KW
Motor Peak:
50KW
Rated Torque:
80N.m
Peak Torque:
180N.m
Rated Speed:
3000 rmp
Peak Speed:
6000rmp
Rated Current:
82A
Peak Current:
190A
Weight:
40KG

ANTAR As a petroleum lubrication technology enterprise that rose in the East, since its establishment, it has been committed to the research and development of lubricant technology. Its products can be applied in fields such as lubrication, anti-wear and energy conservation, and heavy machinery friction,and it researches, develops, and sells various ultra-highperformance lubricating oils suitable for automobiles, ships, and industries.

With the vision of "Leading Lubrication Technology, Empowering Global Indus-try", ANTAR has rapidly developed into a global leader in the field of
lubrication solutions. With a modern production base covering an area of 40.000square meters, ANTAR not only plows deep into the Chinese market
but also expands its business territory to many countries and regions in Asia. Europe and North America, and establishes a sales and service network covering the whole world.

ANTAR has established long-term cooperative relationships with internationally renowned companies to jointly promote the innovation and application of lubrication technology and provide customers around the world with high-quality lubrication solutions without boundaries.

All ANTAR products fully meet the International Organization for Standardization (ISO), the American Petroleum Institute (API), the Society of Automotive
Engineers (SAE), the U.S. Environmental Protection Agency EPA, and other standardized production.

The products meet the certification standards of many international mainstream manufacturers such as CUMMINS, VOLVO, MAN, Mercedes-Benz, and Porsche.
BMW, Automobile Manufacturers Association of Europe (ACEA), European Union CE, etc., as well as the installations of Audi, Volkswagen, Porsche, MercedesBenz, Volvo, BMW, Mack, Mann, Renault, Cummins and other many engine manufacturers, After-sales service oil certification, and is widely accepted and used by motorsports organizations around the world.

We have passed IS09001:2015 quality management system certification, IS014001:2015 environmental management system certification, and OHSAS18001:2007 occupational health and safety management system certification to ensure that every step from raw material procurement to finished product shipment meets the latest international standards.

The Orion Bus Industries Orion VII NEW GENERATION HYBRID DIESELLITIUM_ION is a low floor transit bus that was Build in Canada and the United States by NEWFLYER INDUSTRIES restyled Orion VII NG was introduced in 2009 It features updated front and rear fascias and flushmounted windows Coincident with the introduction of EPA 2007 compliant engines a restyled Orion VII was introduced in 2007 It features updated front and rear fascias and flushmounted windows The new model called the Orion VII Next Generation replaced the traditional Orion VII

the Orion VII is not fully low floor and has a step up at the rear section of the bus This compensates for the space lost to the rear wheels on the Orion VI The buss structure was built from either carbon steel or stainless steel and clad with fibre glass and aluminum panels

The Orion VII NG is available in a desielelectric
hybrid The engine Build by CUMMINS USA On hybrid models the
engine is placed transversely at the rear right side of the bus and is
connected to the electric generator to the left Dieselpowered models
use a 125 gallon 473 litre fuel tank placed under the high floor

The Orion VII was available in a conventional diesel dieselelectric
hybrid or compressed natural gas CNG drivetrain The engine is
mounted longitudinally at the rear in a Tdrive arrangement for
conventional diesel and CNGpowered models On hybrid models the
engine is placed transversely at the rear right side of the bus and is
connected to the electric generator to the left Dieselpowered models
use a 125 gallon 473 litre fuel tank placed under the high floor

Features
Engine 59liter Cummins ISB diesel engine
Generator 120 kW permanent magnet generator
Electric motor 320 peak hp electric motor
Batteries 46 leadacid aircooled batteries
Control system Optimizes performance for emissions fuel economy and power
Transmission No traditional transmission
Propulsion system BAE Systems HybriDrive series diesel
Diesel particulate filter Removes particles from the exhaust
Benefits Lower emissions than conventional diesel buses Higher fuel economy than conventional diesel buses Quicker acceleration and Improved overall operating costs per mile

Teaching Content:

1. Cognition of the configuration of electronically controlled gasoline engine systems.

2. Understand the control principle of electronically controlled gasoline engine system.

3. Master the basics of electronically controlled gasoline engines.

4. Master the working principle of electronically controlled fuel injection system and ignition system.

5. Ability to independently enumerate and interpret components of an electronically controlled gasoline engine system.

6. Master the operating conditions of the sensor actuators of the electronically controlled gasoline engine system.

7. Independent troubleshooting, maintenance and repair of electronically controlled gasoline engine systems.

After-Sales Service:

1. One year guarantee for whole equipment (except for human damage).

2. Long-term 24 hours online technical support.

3. Professional engineer debugging to ensure the quality of all products.

Our Advantage:

Within 24 hours reply

Professional technical consultation

Ideal product quality

Very punctual delivery time

Reassuring after-sales

Worthy of new and reliable enterprises

Hot Tags: automotive direct injection trainer, , manufacturers, suppliers, engineering, OEM, ODM, cutaway model without car body, auto door system equipment, science laboratory equipment, air conditioner lab model, engine model educational, dissecting set

Product Performance And Features:

1. Engine type, front drive, in-line four-cylinder water cooling.

2. The crankshaft, piston, valve and other components are clearly displayed in the cut-off cylinder.

3. Intake and exhaust system, cooling system, oil supply system and lubrication system.

4. Color profile, enhance the layering between the structure.

5. Using high-quality steel pipe, painted cabinet frame, relying on its four universal casters to move.

6. The motor drives, observe the engine working condition

7. With a manual, and a safety shield.

Our Advantages:

1. Factory delivery, direct transaction, no after-sales dispute

2. 12-month warranty to protect your use

3. Short delivery time, fast transportation time, safe transaction funds

4. Trading service staff is fixed to facilitate your communication

5. The company is close to the airport for your on-site inspection

Hot Tags: hybrid engine cutaway model, China, manufacturers, suppliers, engineering, OEM, ODM, electric power steering(eps) system, Automotive Electric And Electronic Control Trainer, automotive transmission, air-conditioning system, Automotive Trainer System Model, Driving Simulator Equipment For Driving School