Aluminum Alloy Coil

Aluminum coil

International standard packing

5052 aluminum coils is Aluminum-magnesium alloy aluminum coils. Mg is the main alloying element in 5052 aluminum coils. It is the most widely used rust-proof aluminum. The alloy is high in nature, especially fatigue resistance, plasticity and corrosion resistance, with high strength. It can not be heat-treated, the plasticity of it is good in semi-cold hardening. It s low in plasticity during cold hardening, and good in corrosion resistance with good weldability, poor machinability and polishing.
The main alloying element of 5052 aluminum sheet is magnesium, and aluminum-magnesium alloy also contains a small amount of Mn, Cr, Ni, Ti, etc. Most of the Mn in the alloy forms MnAl6 except for a small amount of solid solution. In the interior of the 5052 aluminum coils, the effect of Cr is similar to that of Mn, which improves the resistance to stress corrosion cracking, improves the strength of the base metal and weld, and reduces the tendency of weld cracking, but its content generally does not exceed 0.35%.
Surface Advantages of 5052 Aluminum coils:
1. surface of 5052 aluminum coils is not allowed to have cracks, corrosion spots and traces of nitrate.
2. The surface is allowed to have peeling, air bubbles, surface roughness. and it is also allowed to have local mechanical damage with a depth not exceeding 8% of the nominal thickness of the part where the defect is located. But the maximum depth of the defect shall not exceed 0.5 mm, and the total area of the defect shall not exceed the total area of the coils 5%.
3. Allow the supplier to illuminate the profile longitudinally to a smooth surface.
4. Other requirements: There are demanders and suppliers to draw up their own.
Application of 5052 Aluminum coils:
5052 aluminum coils is mainly used for high plasticity with good weldability. It is also commonly used in transportation vehicles, ship sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical enclosures, etc. It can also be used to manufacture aircraft fuel tanks, oil pipes, aerospace aluminum alloy materials, and is a typical rustproof alloy material.
The atates of 5052 aluminum coils includes F, O, H12, H14,, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114.

3003 aluminum coil is the most widely used aluminum alloy. It is made up of aluminum, copper, iron, manganese, silicon and zinc. It is commonly used because it has great resistance to corrosion and is moderately strong. The 3003 aluminum coil is 20% stronger than 1100 grade alloys because it is fused with manganese.

Because it s not heat treatable, it has to be strengthened using cold working alone.
The most common applications for the 3003 aluminum coil are for fuel tanks, sheet metal work and other types of projects that need a metal that is stronger than the 1100 series aluminum. In some cases, it is used for cooking utensils, refrigerator panels, gas lines, storage tanks, garage doors, builder s hardware and awning slats.

Aluminum alloy sheets/coils and its custom cut products, hot and cold rolled for different hardness
Specifications include all grades of series 1,2,3,4,5,6,7 ( prices vary depending on the required grade of the product)

5052 aluminum coils is Aluminum-magnesium alloy aluminum coils.

Mg is the main alloying element in 5052 aluminum coils.

It is the most widely used rust-proof aluminum.

The alloy is high in nature, especially fatigue resistance, plasticity and corrosion resistance, with high strength.

It can not be heat-treated, the plasticity of it is good in semi-cold hardening.

Itâ??s low in plasticity during cold hardening, and good in corrosion resistance with good weldability, poor machinability and polishing.

The main alloying element of 5052 aluminum sheet is magnesium, and aluminum-magnesium alloy also contains a small amount of Mn, Cr, Ni, Ti, etc.

Most of the Mn in the alloy forms MnAl6 except for a small amount of solid solution.

In the interior of the 5052 aluminum coils, the effect of Cr is similar to that of Mn, which improves the resistance to stress corrosion cracking, improves the strength of the base metal and weld, and reduces the tendency of weld cracking, but its content generally does not exceed 0.35%.

Surface Advantages of 5052 Aluminum coils:

1 - surface of 5052 aluminum coils is not allowed to have cracks, corrosion spots and traces of nitrate.

2 - The surface is allowed to have peeling, air bubbles, surface roughness.

and it is also allowed to have local mechanical damage with a depth not exceeding 8% of the nominal thickness of the part where the defect is located.

But the maximum depth of the defect shall not exceed 0.5 mm, and the total area of the defect shall not exceed the total area of the coils 5%.

3 - Allow the supplier to illuminate the profile longitudinally to a smooth surface.

4 - Other requirements: There are demanders and suppliers to draw up their own.

Application of 5052 Aluminum coils:

5052 aluminum coils is mainly used for high plasticity with good weldability.

It is also commonly used in transportation vehicles, ship sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical enclosures, etc.

It can also be used to manufacture aircraft fuel tanks, oil pipes, aerospace aluminum alloy materials, and is a typical rustproof alloy material.

The atates of 5052 aluminum coils includes F, O, H12, H14,, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114.

Hello, our factory is located in Gongyi city Henan province. We manufacture and export PE Coated Black Aluminum Coils and we export to south Korea hundreds of tons each month.

Hello, our factory is located in Gongyi city Henan province. We manufacture and export PE Coated Black Aluminum Coils and we export to south Korea hundreds of tons each month.

Hello, our factory is located in Gongyi city Henan province. We manufacture and export PE Coated Black Aluminum Coils and we export to south Korea hundreds of tons each month. Please let me know if you are interested

Place of Origin:China
Brand Name:Musen
Model Number:1050/1060/1100/3003/5052
Application:Bottle CapWidth:100-2600mm
Alloy Or Not:Is Alloy
Grade:1000 Series
Surface Treatment:
Coated
Temper:Other
Material:Aluminum
Color:Silver
Alloy:1000 Series/ 3000 Series/ 5000Series
Condition:F
Core or not:Paper Core
Core ID:500/505/508MM
Core OD:1850MM
Thichness Tolerance:+/-5%
Width Tolerance:+/-1mm
Package:Wooden Pallet