Bts Character Cables

1. Standard of xlpe cable: according to gb12706( equal to iec60502)

2. Rated voltage of xlpe cable:3.6/6.0kv;5.8/10.0kv;6.0/10.0kv;8.7/15kv 7.2kv 12kv 17.5kv

3. Construction of xlpe cable:

Conductor: copper
Insulation: xlpe
Inner sheath: pvc
Armoured: non armoured
Outer sheath: pvc
No. Of cable cross: 1 core(single core)
Conductor size: 150mm2, 150 sq mm, 150mm, 150mo

4. Characters of xlpe cable:

A.Max long-time operating temperature of xlpe insulated cable is 90
B.Installing temperature of cable should not be less than 0
C.Max short-circuit temperature is not exceed 250, not more than5 sec.
D.Unable be laid without the limit of fall with enough mechanical pull, single core cable can not be laid in iron tube or fixed by circled iron tools around cables

5. Description & application of xlpe cable:





1.1-2.24mroll packing as clients requirements

Zebroncis has wide range of lifestyle accessories to choose from (like portable speakers, BT/Wired Headphone/Earphone, Cables, ) that suits to every customer's life style and pocket as well.

Jumper cables provide easy connection from the main feeder cable to the antenna or BTS. Jumper cables prevent dropped calls with very low VSWR value and high quality with IP68 environmental factor, helping to increase the profitability of the mobile communication operator in the long period

XLPE insulated high voltage power cable is used to transmit power on the power transmission and distribution line of A.C.50Hz, rated voltage 35kV or lower, and also used for Subway,Power station,Factory and Mine.It can be installed underground, in pipe, in trench or in tunnel.
XLPE Cable not only has excellent electric character, mechanical character, heat and aging-resistant character, environmental stress-resistant character and chemical corrosion- resistant character, but simple structure, light weight, no restriction by laying drop, and high temperature allowance for long-term working as well.

Material: Stainless Steel Size: Customized
Stainless steel cable tie cable accessories self-locking ball-locking steel cable tie



Stainless steel cable tie cable accessories self-locking ball-locking steel cable tie



Cable Tie Steel



Model: TEL-CTS-4.6*370



Description:



Telsto ball-locking steel cable tie is most popular type which are made from high quality steel material, having the characters such as heat-resisting ,erosion control, insulate well, fireproof and not apt to age.



Ideal for use on small leads or objects
Structure: Self locking, ball bearing mechanism for quick and easy installation, either by hand
High resistance to acetic acid, alkali acid, suiphuric acid, etc.
370mm Long - 4.6 mm Wide
Material: Stainless steel 304, 201, 316
Brand New, Retail Bagged
Maximum Bundle diameter : 102mm
Working temperature: -80-500
Usage: Stainless steel cable tie cable accessories self-locking ball-locking steel cable tie

XLPE insulated power cable is used to transmit power on the power tansmission and distribution of AC,rated voltage 35kv or lower.Incompatison with PVC insulation cable,It boasts not only excellent electric character,mechanical chatacter,heat and agingresistant character,environmental stress-resistant chatacter and chemical corrosionresistant chatacter,but simplw structure,light weight,no restiction by laying drop,and hight temperature allowance for long-term working as well.
Executive standard
1)GB/T12706.1-2002(Equivalent IEC 60502)
Rated voltage 1kv (Um=1.2kv)and power cable
2)GB/T12706.2-2002(Eqquivalent IEC60502-2)Rated voltage6 kvUm=7.2kv and Um=36kv power cable
3)G/BT12706.3(VOLTAGE Grade Overtep IEC 60502-2) Rated Voltage3.5V Um=40.5kv and power cable.
Working consitions:
1) This maximum working temperatuie of thr conductor temperature is +90.
During having a short (lasting less than 5 seconds )the maximum temperature of the cable conductor shall not be above +250
Environment temperture should be no lower than+0 for laying the cable.
2) Bending radius allowance of the cable:
Single core cable:No steel tape cable 20D,steel tape cable 15D
Cores cabel: No steel tape cable 15D steel tape cable 12D
Notes: D ptactical esternal diameter of cable.



Wooden drums

CPRI fiber patch cable is the ideal design for outdoor fiber cable applications. Such product can meet the FTTA(fiber to the Antenna) program requirements for outdoor environment conditions. Especially in the 3G, 4G, Base station (BBU to RRU). CPRI fiber patch cable are rapidly becoming the standard connector interface.

Product feature
Ideal for outside cabling application
Armored steel tape for rodent resistance
Pressure resistance
Fully water-blocked
Moisture blocking loose tubes
Fiber 2 core or 4 core
Easy Operation, reliable and cost-effective
Applications
FTTA & FTTH
Base station, BTS installation, BBU to RRU
Indoor/outdoor building cabling
Harsh environments application 
Long haul networking
Direct burial and aerial lashing

The integrated cabels are based on user requirements, combining the different types of cables together, they not only can be connected to the power supply, but also capable of transmitting audio and video signals, with the character of compact structure, easy to use, they meet the needs of users on different occasions, commonly applicable in the hall, the important environmental and residential area monitoring and so on.

Factory Direct Drop Cable, high quality with most competitive prices.

Your partner of FTTH project.

Recommended laying methods:
Drop Cable used in access networks or as access cable from outdoor to indoor in customer premises networks




Drop Cable Structure characters:

Good mechanical and environmental characteristics
Drop Cable 's Flame retardant characteristics meet the requirements of relevant standard
The mechanical characteristics meet the requirements of relevant standard
Soft, flexible, easy to lay and splice and with big capacity data transmission
Meets various requirements of market and clients




Drop Cable should be used 
Used in the access network or CPN introduced into the room from the outside cable 
Integrated wiring in buildings used for the introduction of cable, especially when the introduction of indoor or outdoor overhead wiring 

Drop Cable Features 
Has good mechanical and environmental performance 
Flame (or retardant) performance to meet the standards 
Sheath of the mechanical and physical properties to meet the relevant standards 
Easy installation, flexible, convenient connecting and supporting high-capacity data transmission 
Meet market and user demands 

Drop Cable Customization
Fiber types: Single-mode G. 652 or G. 655 or G657fiber, A1a or A1b multimode fiber, or other models and types of fiber 
Jacket material: Flame-retardant polyvinyl chloride (PVC), smoke halogen (LSZH), polyurethane (TPU) or other agreed material 
Jacket Color: (including fiber optic cable in color) the color of the standard requirements, but also other agreed upon color 
Cable Size: Nominal fiber size, but also other agreed size 
Delivery length: 1km or 2km, but also other agreed length 
Other requirements: Other special requirements agreed