Which main used to assist staffs convenient to skinning sheep hind legs,main data as following:
1)-Out size: 1600X1000X800mm (LXWXH)
2)-Component and material:
Material Imported abs materials
Model Yma-69964
Performance Having good anti- impact, anti- pollution, hot stability and gloss is high, having characteristic of preventing the bacteria
Work principle Low temperature changes operating principle, improving the organization of your skin and enhancing the contours of your face, give your skin the best moisture.
Applicable body parts Face , arm, belly, leg, whole body
Power 8w
Temperature range 7-10 degree celsius
Adapter Ac100v-240v 50/60hz dc5.6v/1.2a
Product size 155*32*40mm
Net weight 0.15g kg
ZL series Long Bag Pulse Dust Collector is a new type and high efficient bag filter that develops from the common short bag fpulse bag filter. It has the features like bigger air volume, stronger dust cleaning ability, high efficiency, easy operation and maintenance and etc. It is suitable for dusty air cleaning and maerial dust collecting in the industries like metallurgy, construction, chemical and etc.
Application of Bag Pulse Dust Collector:
It is suitable for dusty air cleaning and maerial dust collecting in the industries like metallurgy, construction, chemical and etc.
Structure
ZL series Long Bag Pulse dust collector is mainly composed of upper box, middle box, ash bucket, supporting legs, filtering bag and blowing device, ash discharging device. The features of this structure are:
1. Upper box is devided into thousands chambers. In order to realize off-line cleanign dust and maintenance, each chamber has equipment 1 lifting valve.
2. Pneumatic vent valve is controlled by air cylinder. The advantages are realiable operation, fast speed of on/off, without any leakage of air.
3. Compared with horizontal installation, the vertical installation fo pneumatic vent valve is easier during maintenance.
4. Filtering bag is self-locked and sealed on the board holes by the flexible ring on the bag. This can gurantee low emission density and easy for installation and replacement.
5. Optimized injection short tube can gurantee perfect dusting cleaning performance.
6. Safety guard and walking platform are equipped for regular maintenance.
OUR ADVANTAGE
1. Advanced thin type lifting valve and off-line dust cleaning device can gurantee to collect the dust completely.
2. Reasonable design for air inlet evenly flow tube and dust hopper discharging device. This can resolve the problem the uneven air flow of each chamber.
3. Bigger volume air bag can be suitable for both high pressure and low pressure air supply.
4. Spring increase type is adopted on the top of filtering bag. It has the advanages like good sealing performance, easy and fast bag replacing, bag replacing outside the bag filter.
5. Design of filtering bag is different according to different industry and application. The fabrication standards are increased at approx. 50% based on the industry standard.
6. Solenoid pulse vale adpots high quality raw materia. Its mebrane has longer using life.
7. Control system adpots advanded controller. It has 3 controlling methods: pressure difference, timing and manual. Offline valve, pulse valve and ash discharging valve are auotmatically controlled by the system.
Product features:
1. Urea crusher mainly uses the grinding and cutting of the gap between the roller and the concave plate.
2. The clearance size determines the degree of material crushing, and the drum speed and diameter can be adjustable.
3. When the urea enters the body, it hits the body wall and the baffle and is broken. Then it is ground into powder through the rack between the roller and the concave plate.
4. The clearance of the concave plate shall be adjustable to the extent of crushing by the regulating mechanism within 3-12 mm, and the feeding port regulator can control the production volume.
Product introduction:
Crop straw crusher can crush corn straw, straw, peanut skin, beanstalk, flowers and other burning residues. It avoided the burning of crop straw, protected the environment, and effectively developed renewable energy. The machine is reliable in operation, that easy to operate and maintenance. The equipment has a wide range of raw materials, and is suitable for crop residues.
Performance characteristics:
This product design is reasonable, the manufacture quality is reliable, has the structure simple, the operation is convenient, the volume is small, occupies the land little, saves the labor, saves the electricity characteristic.The designed automatic control electric heating device can adjust the dry and humidity of materials randomly, ensure the stability of discharging molding, and improve the working efficiency.The main parts of this product are made of wear-resistant material, which is specially treated, so it can be continuously pressed and durable.Suitable for all kinds of biomass raw materials (corn straw, wheat straw, cotton straw, straw, branches, leaves, sawdust and other agricultural materials as raw materials or wood.
Working principle:
Straw crusher can be matched by motor, diesel engine or 30-50 horsepower tractor, the main engine is composed of feeding mechanism, zha cutting mechanism, throwing mechanism, transmission mechanism, walking mechanism, protective device and rack.It has the advantages of reasonable structure, convenient movement, automatic feeding, safety and reliability.
Its components are as follows:
1. Feeding mechanism: it is mainly composed of feeding platform, upper and lower cao kun, fixed blade, fixed knife support base.
2, zha cutting and throwing mechanism: mainly by the moving knife, knife disc, lock screws and other components.
3. Transmission mechanism: mainly composed of triangle belt, transmission shaft, gear, universal joint, etc.
4. Walking mechanism: mainly composed of ground casters.
5. Protective device: it is composed of protective cover.
Standard configuration of 1000L beer brewing equipment:
Malt miller:
300-500kg/h
Doubel roller
Nosie: 45db or so
Brewhouse system:
1000L Mash/Lauter tun
1000l Kettle/whirlpool tun
Steam heating method
1000L hot water tank
Tubular galss level indicator
Tangential wort inlet
Side mounted grain outdoor with grain chute
Laser cutting V-wire False Bottom
Heating exchanger: 10 square meters
Wort pump: ABB motor, VFD control
Wort aeration device
Yeast adding tank: 30L
Seamless food grade stainless steel 304 pipes
Working platform
Fermentation system:
Material Inner (SUS304) thickness: 3.0mm; Outer (SUS304) thickness: 2.0mm; External-Jacket(SUS304) thickness: 1.5mm;
Heat exchange areaï¼?2.69 ã?¡
Equipment with : cone 60�°resist compression designï¼?dripping
100% TIG welding with pure argon gas shield
Interior Finish: Sanitary 2B finish, Pickled and Passivity; (8K Mirror finish optional)
Exterior Finish: Oil brushed finish ï¼? 2B, 8K Mirror finish optional)
Interior full polished to 0.2~0.4 �¼m without dead corner
Insulated with high density Polyurethane foam 100mm
Glycol Jacket: Dimpled plate on cone and side
Stringent tank leakage test by water and pressured gas
Stringent Jacket leakage test by water and pressured gas
Sanitary side mounted manway with pressured door
TC connected CIP arm with 360�° coverage spraying ball
CO2 blow-off arm with butterfly valve
Full sanitary metallic sealed sampling valve
Mechanical safe valve PVRV 2 bar on top
Hydraulic shock pressure gauge on CIP arm
Rotating racking arm and port on cone with butterfly valve
Tri-clamp discharge arm with butterfly valve
Thermowell for high accuracy temperature sensor
4 pcs completely SUS304 heavy duty legs with leveling pad and legs support
Dry hopping port 4â?? TC with solid end cap
CIP system:
100L alkali tank with electric coils assembled inside
100L acid tank
control box
Trolley
Shell 4 mm thk S.S. 316
Top Flange 16 MM THK RING S.S. 316
Top Lid Loose Type in two pieces 16 swg S.S. 316. or top dished as per clients requirement.
Jacket S.S. 304. 6 mm thk with spiral stiffeners
Insulation 50 mm thk glaswool cladded with with S.S 304 with 16 Swg Welded.
Conections 25 NB, bottom valve, Jacket : Steam Inlet , condensate outlet, Jacket Drain with plug, Water Inlet is provided.
Legs 40 NB, Heavy Guage S.S. pipe S.S.304. 4 nos.
Sensor PT-100 for Digital Indicator.
Jacket Pressure 3.5 Kgs.cm.sq working.
Stirrer Suitable H.P. /960 R.P.M /440V/TEFC mounted on side or from the bottom of wax vessel & Water vessel. Agitator will be propeller type
Finish Internal and all contact parts buffed to 240 grit mirror finish and external bufed to 150 grit matt finish.
B) MANUFACTURING VESSEL
Material of construction :
Shell 6 mm S.S. 316.
Bottom Hemispherical 6 mm S.S. 316
Top Dish Type 6 mm Thick S.S. 316.
Flanges 16 mm thick S.S. 316
Jacket 6 mm thk SS. 304 with spiral patten Stiffeners . cladded with 16 swg S.S 304 welded.
Gasket silicon fitted in groove.
Insulation 50 mm Thick Glasswool with 16 swg S.S. 304 cladding welded.
Legs 3 nos S.S. pipe heavy guage.
Connection Light Glass, Sight glass, Wax inlet, Water Inlet
Nozzels Vacuum Manifold with Vacuum Gauge, Vacuum Nozzle and vent Valve, product outlet , bottom full bore ball valve S.S. 316.Jacket steam inlet, condensate outlet, Drain Plug, Cooling water inlet, Cooling Water Outlet, Manifold with safety valve, Pressure gauge etc.
Bottom Clearance 500 mm from ground level to valve or as required.
Agitator Anchor type S.S. 316 . driven by suitable HP dual rpm motor coupled with gear box.
Bearing Housing Angular Roller Bearing 2 Nos Mounted on a Lantern support caldded with S.S. 304 sheet. S.S. 304 guard is provided.
Homoginizer Bottom Entry High speed Emulsifier of suitable H.P. /440V/1440 RPM/TEFC Motor.
Shaft Seal Mechanical Seal with cooling Arrangement mounted on a conical portion.
Sensor PT-100 type will be provided.
C) PRODUCT PIPE LINE :
Pipe line will cover the following :
1) Water phase vessel to Mixing vessel thru pump
2) Wax phase vessel to Mixing Vessel thru pump & conical filter
3) Mixing Vessel for re-circulation
4) Mixing vessel to Storage Vessel through lobe pump.
5) Storage vessel to hopper of filling machine through transfer pump.
All pipe are seamless & electropolished from inside and outside. Fittings are DIN standard with silicon gasket.
D) ELECTRIC CONTROL PANEL :
It shall consist of
a Main isolator
b DOL starter for Anchor drive
c DOL starter for HSE motor
d Machine light switch for main Mixing Vessel
e Electrical Digital temperature indicator for all vessel
f. Fuses for all motors
g. Ammeter for anchor and HSE motors
h. Indicating lamps for main ON & OFF with selector switch.
i. DOL starters for propeller agitators of Wax & water Phase vessels
j. DOL Starters for all the pumps
E) PUMPS:
CENTRIFUGAL PUMP
Rate : 400 Ltrs/Hr
MOC : SS 316Q
Inlet & Outlet : DIN fitting with T connection at inlet & outlet
Above pump is used to transfer wax & water to the main mixing tank.
BUMP PUMP :
Above pump is used to recirculate final mixed cream for intense mixing & to transfer finished cream from Mixing vessel to storage vessel. Other details are as below.
1) Type : Twin BUMP
2) Design : Sanitary
3) Drive : suitable HP, 200 RPM gearbox & motor
4) Seal : Teflon bush
5) Mounting : Trolley mounted , MOC ? SS304Q
6) Inlet & outlet : DIN fittings / triclover at inlet & outlet.
7) MOC : SS 316Q for contact parts
TRANSFER PUMP ? RECIPROCATING TYPE, POSITIVE DISPLACEMENT & METERING TYPE
Above pump is used to transfer CREAM/OINTMENT from storage vessel to hopper of filling machine.
a) Type : Reciprocating Plunger type
b) Capacity : 1000 LtR./Hr
c) Drive : suitable HP, 1440 RPM
d) Head : 2.5 Mtr.
e) Mounting : Trolley mounted , MOC ? SS304Q
The above pump doses metered quantity of cream into the hopper of filling machine which suits filling rate of filling machine. There is control feed back system between Filling machine & pump .
VACUUM PUMP :
Above pump is suitable HP & capacity depending on the capacity of the ointment plant vessel . watering / oilring type with silencer & non return valve.
F) STORAGE TANK:
The vessel shall be in SS 316Q having cylindrical conical bottom. The vessel will be provided with 40mm ball valve. Shell portion will be flanged from top & bolted to top dish with gasket in bet-ween. All joints are fusion free argon arc welded & inside mirror finished.
The vessel will be supported by 4 nos. cladded ?C? class 3? pipe and to maintain 450mm ground clearance. Vessel has 50mm inlet nozzle for finished product entry & vent.
G) WORKING PLATFORM :
This platform will cover both tanks & with AL dimpled plate and SS counter sunk screw. SS 304 Q railing on either side. There is provision of steps on either side.
