If your resources wetness meets the needs, a biomass wood pellet press machine can produce timber pellets. If it does not fulfill the demands, it needs to be dried out, so it needs to be geared up with a wood dryer and also a warm blast range. Naturally this is if your basic material is timber chips. If your resources is wood chips (thickness less than 0.5 mm), it needs to be pulverized, which is equivalent to adding one more process. Some clients' raw materials are bark, which is additionally possible after including a wood pulverizer.
Nevertheless, some customers' basic materials are wood scraps, due to the fact that the cost of wood scraps is cheap and also very easy to get, so there are numerous cases, then it is necessary to add a timber chipper, initially to cut the non-standard timber scraps into wood chips, and after that most likely to crush.
For some customers whose resources are waste building layouts, it is essential to alter the wood chipper to a bamboo plywood crusher.
Since the bamboo plywood itself has several iron nails, it is very simple to damage the blade on the timber chipper when making use of a timber chipper. Another reason is that the waste structure template is relatively broad, and the feed port of the timber chipper is typically 1250px.
It is difficult to by hand break it in advance, right The bamboo plywood crusher can go into any type of bamboo plywood with a feed opening of less than 1.25 m, and also the gnawing knife of the bamboo plywood crusher is an ingot blade, as well as the iron nails have little result on him.
Unlike wood chippers, the blades are easily damaged. Bamboo plywood is also an benefit of making timber pellets. Normally, its wetness material is really small, between 15-20%. Therefore, making use of bamboo plywood as pellets saves the trouble of wood drying out devices.
