SKIDDOMETER BV11
All airports with turbojet traffic should own or have access to a CFME. Skiddometer BV11 is the most reliable and accurate system for determining runway surface friction values.
The Skiddometer CFME system is designed for easy towing with any vehicle. It incorporates features and improvements gained from more than fifty years of experience. The product proven lifecycle cost is the lowest in the market. Only a few of the Skiddometer parts are exposed to wear, so maintenance and calibration are only needed once a year. The trailer is designed to last for decades and all models can be updated with current parts and the latest computer system.
(2) taiwan shangyin advanced screw has excellent performance, sufficient strength, operating sensitivity, high accuracy, speed; noise.
(3) the machine adopts u.S. Microe high-precision grating. High-speed non-contact operation, to ensure zero friction and zero machine wear, open-type optical design ensures high performance, periodic error is usually on
¡¨¤ 0.25|¨¬m, linearity error characteristics for each 60mm ¡¨¤ 1|¨¬m.
9. Focus mode: af z-axis.
10. Linear precision: u1 = (1.5+ l/200) |¨¬m.
11. Repeat precision: 2 |¨¬m.
12. Equipped with: pc a 19"monitor * 2.
13. Work piece maximum height: 200mm.
14.Weight limit: 35 kg.
15.Dimensions: 620*840*1020 mm.
16.Machine weight: 330kg
17.Machine positioning accuracy: ¡¨¤ 0.001mm.
18. Three axis velocity:200mm/s.
19. File output formats: stl, obj, iges, dxf, of vrml..
20. The structure of the machine: 0 precision 100mm thick granite platform fuselage basis. High accuracy, good stability, and not easily deformed, resistant of acid and alkali.
21. Application areas: mechanical, electronic, electrical, aerospace, automotive, military, mold, optical and other industries.
3d optical measuring machine vmu3020
Packaged by free fumigation wooden case
PCD Wear Resistant Parts
Polycrystalline Diamond is a professionally applied clear diamond thick layer which is extremely hard .Due To Extremely Low Friction And High Wear Resistant Make PCD The Ideal Material For Support And Reference Parts Submitted To Wear.
PCD wear parts are used for workpiece support and reference, such as Dead Centre and Centre points, Support pads for lathe machines, Centring and positioning components, Measuring probes and points, Master gauges, others PCD wear parts
Application of PCD wear resistant parts
PCD Bearing, Bearing. Such As Front PlatePressure RotorLoading ShoeBacking Plate.
Electronic Components. Such As Punch ToolRounded Shaped DieRectangular Shaped DieDiamond Chip Heater, Bonding Of IC Chips.
Machine Tools. Such as Collet, Centerless Blad, Fixed Lathe Centres, Gauge Heads. and Support pads for lathes.
Automible Industry (Camshaft, Crankshaft, spray nozzles), Measuring fixtures, Measuring probes and points, Etc.
Introduction:
Understanding and managing the coefficient of friction (COF) is vital in optimizing packaging processes across various industries. The COF-01 Coefficient of Friction Tester provides comprehensive solutions for precisely measuring COF, ensuring efficient performance and quality control throughout packaging operations.
Background:
The COF signifies the degree of friction between surfaces, influencing the ease of sliding between materials. In packaging, maintaining an optimal COF is crucial for smooth processing and minimizing issues during packaging creation, transportation, and storage. Various factors such as additives, treatments, and materials composition affect COF.
Application:
The COF-01 Coefficient of Friction Tester is versatile, catering to a wide range of materials including plastics, rubber, paper, and more. It adheres to industry standards such as ASTM D1894, ISO 8295, TAPPI T816, and GB 10006, ensuring accurate and reliable results.
Formula:
COF is calculated by dividing the force required for sliding by the perpendicular force between surfaces. The tester measures both static (�¼s) and kinetic (�¼d) COF, crucial for assessing stacking, cartoning, machinery processing, and other packaging scenarios.
Technical Features:
1. Advanced PLC control and HMI touch screen interface ensure user-friendly operation and stability.
2. Precision stepper motor and ball lead screw drive mechanism guarantee accurate testing.
3. Real-time test curve display and automatic result recording enhance efficiency.
4. Measures both static and kinetic COF for comprehensive analysis.
5. Compliance with multiple industry standards ensures reliability.
6. Integrated dot matrix microprinter for convenient data output.
7. Aluminum construction of the test plane ensures durability.
8. Optional professional software and RS232 output for enhanced functionality.
9. Customizable local language display for user convenience.
Main Parameters
Load Cell 5 N(or as required)
Accuracy 0.5 F.S.
Sled 200 ±1g (or as required)
Sled Size 63.5mm*63.5mm (or as required)
Test Speed 100mm/min (ISO), 150mm/min (ASTM)
Dimensions 540mm(L)*380mm(W)*240mm(H)
Weight NW 21kg
Power 110~220V 50/60Hz
The scales may also be fitted to co-ordinate measurement or other measurement equipment used for high accuracy inspection & measurement
Our scales has the below specialities,
1. Quick speed of movement, above 60m per minute
2. bearings are adopted for the sliding part to provide easy movement and excellent repeated positioning function
3. Multi-layer isolating wire mesh and metal soft shell protection is adopted for signal cable to provide excellent water-proof and anti-interruption performance
4. Aluminum alloy material with anodic disposal is adopted for scale body and scale head is cast with hard chrome-plating alloy of wearing resistance
5. Special rubber is adopted for dust proof cover, which is of good scraping and corrosion resistance and small friction
6. Individualized components makes it very easy to install, maintain and repair the linear Encoder, and it is of Anti-water dust-proof and long life
7 .Glass precision measuring grating is adopted for the Linear Encoder as measuring benchmark to ensure high precision
8. Single light source illumination is adopted for good integration
PCD wear parts are used for workpiece support and reference, such as dead centre and centre points, support pads for lathe machines, centring and positioning components, measuring probes and points, master gauges, others PCD wear parts
Details
Polycrystalline diamond is a professionally applied clear diamond thick layer which is extremely hard. Due to extremely low friction and high wear resistant make PCD the ideal material for support and reference parts submitted to wear
Application of PCD wear resistant parts:
PCD bearing, bearing. Such as front plate, pressure rotor, loading shoe, backing plate.
Electronic components. Such as punch tool, rounded shaped die, rectangular shaped die, diamond chip heater, bonding of IC chips.
Machine tools. Such as collet, centerless blade, fixed lathe centres, gauge heads, and support pads for lathes.
Automobile industry (Camshaft, Crankshaft, spray nozzles), measuring fixtures, measuring probes and points, etc.
Advantages of PCD wear resistant parts:
* PCD wear parts improves your precision and makes machining to smaller tolerances possible.
* surface roughness is equivalent to mirror (Ra
Coefficient of Friction Tester measures the static and kinetic friction coefficient of plastic films, sheets, rubber, paper and paper board, medical device, thread, wires etc.
The COF tester can also be customized for many types of materials as well.
COF Test Standards
Coefficient of Friction Tester is specialized in measuring the static and dynamic coefficients of friction of plastic film and sheet, rubber, paper, cardboard, woven bag, fabric style, metal material composite belt for communication cable and optical cable, conveyor belt. By measuring the smoothness of materials, the quality of materials can be controlled and adjusted. In addition, it can be used to determine the smoothness of cosmetics, eye drops and other daily chemical products.
Features
The dynamic and static coefficient of friction of the samples can be measured simultaneously in one test.
The speed can be adjusted to support different sliders.
The instrument can meet the requirements of GB, ISO and ASTM and the testing method can be selected according to the demands of customers.
The table and slide block are degaussed and processed by remanence , which effectively reduces the testing error.
The tester is equipped with touch interface and controlled by micro-computer, which is convenient for users to carry out operation and view data.
With professional software it can automatically process statistical analysis and reanalysis of original data of single and group results. In addition,superimposed comparison in group curves and multiple reports which can directly show the testing results to customers are obtained.
Micro-printer and standard USB interface facilitate the external connection and transmission between the instrument and data sharing system of laboratory.
Principle
The two experimental surfaces are placed flat together. Under a certain contact pressure, the two planes move relatively to each other and the required force is recorded. The weight of the slider divided by the test force is the friction coefficient.
Applications
Basic Applications Plastic Films and Sheets, Paper and Paperboard, Textiles, Non-woven Fabrics and Woven Bags, Rubber, Aluminum Foils, Aluminum Foil Composite Films, Metal Products, Printing Matters.
Extended Applications Wood and Flooring, Photographic Films, Grains, Hair, Pipes, Ball Shaped Materials, Medical Tubes, Lacquered Wires.
Technical Specifications
Test Range 0 ~ 5N (Optional: 0 ~ 10N)
Accuracy 0.5%FS
Stroke 70Â mm, 150Â mm
Weight of Slider 200g (Note: sliders can be customized)
Test Speed 100mm/min, 150mm/min (Adjustable)
Dimension 630 mm (L) 360 mm (W) 230 mm (H)
Power Supply AC 220V 50Hz
Net Weight 33 kg
Configurations
Standard: Instrument, Micro Printer, Slider of 200g.
Optional: Communication Cable, Professional Software, Non-standard Slider, Sliders of 1000g and 500g
To determine the shearing strength of the soil using the direct shear apparatus. In many engineering problems such as design of foundation, retaining walls, slab bridges, pipes, sheet piling, the value of the angle of internal friction and cohesion of the soil involved are required for the design. Direct shear test is used to predict these parameters quickly. The laboratory report cover the laboratory procedures for determining these values for cohesionless soils.
Strain controlled direct shear machine consists of shear box, soil container, loading unit, proving ring, dial gauge to measure shear deformation and volume changes. A two piece square shear box is one type of soil container used.A proving ring is used to indicate the shear load taken by the soil initiated in the shearing plane.
