Exterior Coatings-Fungicidal Wash

Exterior/Outdoor Floor Coating

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

20Kg Bag

Luxes Skim Coat White Interior is a high-quality rapid setting compound consisting of silicates, alumina & gypsum blended with specially graded fillers & ingredients for finishing & smoothing of walls or any other imperfect surfaces.

Ritver Powder Coating is a Italian product manufactured in Dubai UAE for Africa and Asia markets. Powder coating is categorized in:
Class 1,2 and 3 (for metal intrusions- aluminium, cast iron and steel)
Class 1 POLYESTER : Standard Powder Coating with upto 150 color codes as per RAL systems with a warranty of up to 20 years
Class 2 EPOXY: Super Durable (for exterior and interior) for up to 45 RAL color shades
Class 3 EPOXY-POLYESTER:Hyper Durable (for high end structures to protect from UV), Recommended for high rise structures, aviation and metro- locomotive industries

Available in Full Gloss: 90/Gloss: 77/Semi Gloss: 35/Matt: 25/Dead Matt:15% in soft textured, standard texture and coarse finishes
Product is available in 20kg packing

"Polyplast Engrave is a pure acrylic based engrave effect exterior finish which can be
applied straight to most fairface surfaces such as concrete, plaster, brickwork.
Formulation contains exterior durable pure acrylic emulsion, weather resistant
pigments, quartz & marble granules & combination of special biocides. The product is
resistant to UV radiation, alkaline hydrolysis, efflorescence & fungus/algae growth.
On full curing Polyplast Engrave forms a breathable & flexible flim thus imparting anti
carbonation property with minor crack bridging ability. Overcoating the film with a
thinned coat of Polyshield smooth would enhance the esthatics as well as functional
properties (like UV resistance, dust repellency) of the film.
The product is particularly suitable for exterior application but is equally effective for
interior."

"A High gloss enamel based long oil alkyd modified with additives for imparting
non-yellowing property. The product contains high percentage of Rutile
titanium dioxide & other light fast pigments for improved color fastness & high
opacity. Special surface additives in the formulation make the product tough
and fast drying."

"A dead matt emulsion paint based on Acrylic co-polymer pigmented with titanium
dioxide and other light fast and alkali resisting pigments. It is ideal for residential,
commercial, institutional surfaces. It is a non-washable emulsion. The product is most
suitable for interior use."

A solvent borne two pack epoxy intermediate spray coat for Epoxy Texotile system. The product is convertible to various texture form & is supposed to be overcoated with
Wellcoat Superthane topcoat to form Epoxy Texotile system. The system exhibits outstanding exterior durability with good anti-carbonation property.

A copolymer acrylic based high build intermediate spray coat for Epoxy Texotile hybrid system. The product is convertible to various texture form & is supposed to be overcoated with Supercryl or Superthane topcoat to form Epoxy Texotile system. The system possesses everlasting durability with anticarbonation property.