Diaphragm pumps are designed to protect columns and cylinders by separating the liquid being pumped from the columns and cylinders with the aid of a membrane. The left side of the diaphragm in contact with the liquid are made of corrosion-resistant materials or coated with a layer of corrosion-resistant substances; the right side of the diaphragm is filled with water or oil.
Diaphragm pumps, also known as control pumps, is the main type of actuator, by accepting the control signal output from the regulator control unit, with the help of power operation to change the fluid flow. Diaphragm pump in the control process is to accept the regulator or computer control signals, change the flow of the regulated medium, so that the regulated parameters are maintained in the required range, so as to achieve the automation of the production process. If the automatic adjustment system compared with the artificial adjustment process, the detection unit is the human eye, regulation and control unit is the human brain, then the implementation of the unit - diaphragm pump is the human hand and foot. To achieve the process of a parameter such as temperature, pressure, flow, level and other regulatory control, are inseparable from the diaphragm pump.
Air operated diaphragm pumps are commonly used in five materials: plastic, aluminium alloy, cast iron, stainless steel, Teflon. Electric diaphragm pumps have four materials: plastic, aluminium alloy, cast iron, stainless steel. Diaphragm pump diaphragm according to different liquid media were used nitrile rubber, neoprene, fluorine rubber, PTFE, PTFE, etc. placed in a variety of special occasions, used to pump a variety of media to meet the needs. [2].
Diatax pump diaphragms are produced from the highest quality materials and precision molds to ensure a long service life for this â??heart valveâ?? of the diaphragm pump. Diatax rubber/fabric-reinforced and thermoplastic (TPE) pump diaphragms offer a combination of performance and economic benefits including superb flex fatigue resistance, excellent abrasion resistance, and good temperature resistance. Increased flex life results in less downtime, lower maintenance costs and lower replacement costs for the pump user. Diatax pump diaphragms have set the industry standard for years.
Our Diaphragms are suitable for -
Slurry Pumps
Dosing Pumps
Metering Pumps
Air Operated Double Diaphragm Pump (AODD Pump)
Submersible Pump
Actuators Pump
Vacuum Pump
Spray Pumps
Our size ranges from 5mm to 1500mm Diameter in various shapes as per clientâ??s requirement. Our Diaphragms have been tested up to 28 kg/cm2 working pressures and operated up to a million flex cycles.
Our speciality is to design, develop, prototype Rubber Diaphragms as per your specific requirements/service conditions.
Grades of Rubber used for different applications are Chloroprene (Neoprene), NBR (Nitrile), EPDM, Butyl, Hypalon, Silicone & Viton. These Diaphragms are suitably reinforced as per clientâ??s service and requirement with Cotton Canvas, Nylon Fibre, Polyester, Metal Mesh, Glass Fibre, Tyre cord etc.
The Grades of Rubber are offered in respect to various services i.e. Hot Water, Steam, Low permeation gases, Ozone resistance, Oil and fuel resistance, Cryogenic applications etc. Please refer our Chemical service resistance chart as well as our general-purpose polymer chart for guidance.
Pumps have an inlet, outlet Aluminium, and Plastic (Polypropylene) casings and they have more utilization areas in waste water treatment, chemical industry, oil&gas applications and also food&pharmacy, new energy, etc. With good performance at energy saving, low working noise, low-pressure start-up ability, etc.
Model:DDP-2
INSTALLATIONS AND USE . The pumps are compact and designed for a wide range of applications including liquid transfer, spraying , circulation, filtration and dispensing. . This compact automatic demand water system pump has a builtâ?�in pressure switch, which automatically starts and stops the
