Nimrof AT550 water leak detection device , make point determination of dirty and clean water leaks in water pipe lines , the device has two seperate sensors, one is acoustic listening which helps to find clean water pipe network leaks. The other is 2 metal electrodes that find the drain water leaks. �?�±t will be shown on a LCD screen.
Application Fields:
Drainage of Water
Waste water, Pipe Line Leaks
Central Heating System Leaks
Isolation Leaks
Internal and External Leaks
Natural Gas Leaks
Soil Floor Leaks
Nimrof TARZ27-TFT Electronic Fault Locator is designed to complement conventional test instruments in the debug and troubleshooting process. Nimrof TARZ27-TFT Curve tracer is suited for todays varied signal circuit cards where Analog and Digital are mixed together. It provides to find faulty component on the electronic board in a short time by using power-off test method.
Nimrof TARZ27-TFT Curve tracer allows more than 10 various voltage combinations, it operates by applying a low current AC signal to two points of electronic equipment. The current flow appear a vertical signature deflection, while the applied voltage appear a horizontal deflection. Together they form a unique V/A signature that represents the overall health of the device under test. Analyzing the signature can quickly determine whether the component is good, bad, or marginal.
Nimrof TARZ27 Electronic Fault Locator is designed to complement conventional test instruments in the debug and troubleshooting process. Nimrof TARZ27 Component tester is suited for todays varied signal circuit cards where Analog and Digital are mixed together. It provides to find faulty component on the electronic board in a short time by using power-off test method.
Nimrof TARZ27 Curve tracer allows more than 10 various voltage combinations, it operates by applying a low current AC signal to two points of electronic equipment. The current flow appear a vertical signature deflection, while the applied voltage appear a horizontal deflection. Together they form a unique V/A signature that represents the overall health of the device under test. Analyzing the signature can quickly determine whether the component is good, bad, or marginal.
pellet machine, with the advantages of low noise, easy and stable operation,
high automation, can make pellet dia size from 6mm to 12 mm and the output capacity from 1.5t/h to 2.5t/h. We can offer you the complete solution for making pellets, from crushing, drying to pelletizing.
Features :
1. This machine adopts gear first stage driving system, with ideal drive ratio and enormous driving force, its transmission us stable with low noise, operate simply, no blocking is happened to the machine easily.
2. The maximize design if pinch roller can lower the requirement to moisture content of materials in particle molding.
3. The motor and gear cases are installed at the heavy pedestal, pin coupling is used to realize direct connecting, which can exempt from foundation installation and easy to repair and maintain.
4. The machine is equipped with patented water circulation; the cooling system can be used to control the temperature rising of each part efficiently, to guarantee the continuous, stable, reliable running of the machines.
5. The machine adopts advanced variable frequency motor to feed, which equipped with overload intelligent protection.
Metal tin is mainly used in the manufacture of alloys.
Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment.
Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials.
Standard
ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 ,
Content
Pb â?¥ 99.99 %
Density
11.34 g / cm 2
Color
Bluish
Weight
35 kgs / lump, 55 kgs / lump
Dimension
21" x 4" x 2.5"
Package
Standard Sea-worthy package, fixed by belt per ton
Shape
Rectangular Lump
Application
lead-acid storage batteries
Ammunition, cable sheathing, and building construction materials
counterweights, battery clamps
cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil
11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
1.Molecular formula: Co3O4
2.Molecular weight: 240.797
3.CAS No.: 1308-06-1
4.Purity: Co:72%min
5.Storage: Keep the receptacle sealed and stored in a cool and dry place, and ensure that the working room has good ventilation or exhaust device.
Cobalt Tetroxide is similar to ferroferric oxide, and can be approximately regarded as a compound formed by cobalt oxide (CoO) and cobalt oxide (Co2O3). Black or grayish black powder. The apparent density is 0.5-1.5g/cm3, and the tap density is 2.0-3.0g/cm3. Cobalt Tetroxide can be slowly dissolved in hot sulfuric acid, but it is insoluble in water, n itric acid and h ydrochloric acid at room temperature. When heated above 1200 C, it will decompose into cobaltous oxide. When it is strongly heated to 900C in a hydrogen flame, it is reduced to metal cobalt.
Specifications:
Size: 5.1 x 2.8 x 2.0 in. / 13.1 x 7.0 x 5.2 cm
Weight: 11.5 oz. / 328 g
Temperature: -4 to 122F / -20 to 50C
Readily enables to communicate with Motorola MOTOTRBO
Description:
The Honeywell Max XT II is a rugged, handheld mobile computer that is designed for use in demanding environments such as warehouses and manufacturing facilities. It features a high-performance processor and a large, easy-to-read display, making it ideal for tasks such as barcode scanning and data collection. The device is built to withstand drops, bumps and exposure to extreme temperatures and is sealed against water and dust. With a long-lasting battery and the ability to run multiple applications simultaneously, the Max XT II is a reliable and efficient solution for mobile data collection and communication in industrial environments.
Benefits:
Monitors H2S, CO, O2 and combustibles.
One-button operation with robust, motorized pump.
Compatible with MicroDock II
Leak Detector and Seal Strength Tester is suitable for the quantitative measurement of sealing strength, heat sealing strength, binding strength, overall sealing performance, pressure resistance strength, cap body connection strength, bursting pressure and shedding strength. It is widely used in the soft package, plastic pilfer-proof caps, flexible pipes, etc.
Features
A.Compatible with international standards of GB, ASTM, ISO.
B.Positive-pressure test method, easy to operate, stable and reliable performance.
C.Wide test range for different applications.
D.Dual test methods of restraint distension and unrestraint distension for customer's choice
E.Different test modes of burst, creep and creep to failure to meet different test requirements.
F.The "one key" operation in the test process is intelligent and efficient.
G.Touch interface. Automatic statistics and printing of test data.
H.Standard USB interface,software supports test results of multiple units display.
I.The test data can be shared between LAN and Internet.
Principle
Positive-pressure method: after the gas with certain pressure fills into the specimen with setting parameters, the pressure sensor detects the change of air pressure inside the specimen� to judge the overall sealing performance of the specimen, and tests the pressure resistance and bursting performance of the specimen with the specified air pressure.
Technical Specifications
Test Range 0 ~ 600 KPa; 0 ~ 87.0 psi (Standard)
0 ~ 1.6 MPa; 0 ~ 232.1 psi (Optional)
Pressure of Air Source 0.4 MPa ~ 0.9 MPa (outside of supply scope)
Air Connection 8 mm PU Tubing
Dimension 300mm(L) x 310mm(B) x 180mm(H)
Power Supply AC 220V 50Hz
Net Weight 23 kg
Configurations
Standard: Instrument, Test Plate, Micro-Printer
Optional: Professional Software and Communication Cable, Test Accessories (restraint plate test device: open package plastic anti-theft bottle cap sealing performance hose sealing performance; aerosol valve sealing performance)
Note: 1. The gas supply port of the instrument is 8 mm PU Tubing;
2. Customers need to prepare for gas supply.
