Vertical Submerged Pump

Tobee 40mm vertical submerged chemical pump works underwater for delivering heavy concentration abrasive & corrosive slurry with big particles. pump column is made by steel or elastomer covered steel, For rubber lined pump, all wetted parts are made by elastomer for delivering strong corrosion slurry.
Tobee 40mm vertical submerged chemical pump specification:
Size: 40mm
Capacity: 7.2-29m3/h
Head: 4-28.5m
Speed: 1000-2200rpm
Eff.: 40%
Power: Max.15kw
Handling solids: 12mm
Materials: High chrome alloy, Rubber, Polyurethane,Ceramic etc

Tobee 65mm vertical submerged chemical pump is mainly used to transfer high- hardness, strong-corrosion and high-concentration liquids that contain suspended solid particles, The metal lined and elastomer rubber lined is interchageable for different duties, such as finished ores, refuse ores, ashes, cinders, cements, mud, mineral stones and etc.

Tobee 65mm vertical submerged chemical pump Specification:

Size: 65mm
Capacity: 18-113m3/h
Head: 5-31.5m
Speed: 700-1500rpm
Eff.: 60%
Power: Max.30kw
Handling solids: 15mm
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc

Tobee 100mm vertical submerged chemical pump is mainly used in a variety of sump conditions, It can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical slurry pump, TP100RV vertical spindle pump does not have submerged bearings or seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines.
Tobee 100mm vertical submerged chemical pump Specification:
Size: 100mm
Capacity: 40-289m3/h
Head: 5-36m
Speed: 500-1200rpm
Eff.: 62%
Power: Max.75kw
Handling solids: 32mm
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc

Tobee 150mm vertical submerged chemical pump are designed for every other tank, pit or hole-in-the-ground slurry handling situation, TP150SV pumps are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up to 2 metres.
Tobee 150mm vertical submerged chemical pump specification:
Size: 150mm
Capacity: 108-576m3/h
Head: 8.5-40m
Speed: 500-1000rpm
Eff.: 52%
Power: Max.110kw
Handling solids: 45mm
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc

Tobee 200mm vertical submerged chemical pump are an ultra-heavy duty design for continuous operation, the bearing assembly design allows the pumps to operate in very tough conditions without damaging the bearing. Both high chrome alloy and elastomer wet end parts are suitable to the different applications, and the pumps use in many industries, various lengths and suction extensions are available to suit most sump depths.
Tobee 200mm vertical submerged chemical pump Design Features:

Less wear, less corrosion
Wetted components are available in a wide range of alloys and elastomers. Tobee selects the optimum combination of materials for maximum resistance to wear in virtually any industrial application, including those demanding both abrasion and corrosion resistance, and where larger particles or high density slurries are encountered.
Abrasion resistant Ultrachrome T05 alloy.
Abrasion/corrosion-resistant Hyperchrome T49 alloy.
Corrosion-resistant stainless steels.
Natural and synthetic elastomers.
No submerged bearing failures
The robust cantilever shaft avoids the need for lower submerged bearings which are often the source of premature bearing failure.
Heavy duty roller bearings, above mounting plate.
No submerged bearings.
Labyrinth/flinger bearing protection.
Rigid, large diameter shaft.
No shaft sealing problems
The vertical cantilever design requires no shaft seal.
No priming required.
The top and bottom inlet design is ideally suited for â??snoreâ?� conditions.
Less risk of blocking
The screened inlets and large impeller passages reduce the risk of blockages.
Zero ancillary water costs
The vertical cantilever design with no gland or submerged bearings avoids the need for expensive gland or bearing flushing water.
Tobee 200mm vertical submerged chemical pump On-site Applications:
Mining Sump drainage Coal prep Mineral processing
Mill sumps Tunnel Tailings Chemical slurries
Ash handing Paper and Pulp Waste sludge Coarse sand
Lime mud Phosphoric acid Sump Dredging Mill grinding
Alumina Industry Power Plant Potash Fertilizer Plant Other industries

Tobee 250mm vertical submerged chemical pump is centrifugal sump slurry pumps submerged in sump to work.It is designed for delivering abrasive, large particle and high density slurries. The pumps have no need of any shaft seal and sealing water. it can also be operated normally for insufficient suction duties. The submerged depth can be customed as different sump.
Tobee 250mm vertical submerged chemical pump specification:
Size: 250mm
Capacity: 261-1089m3/h
Head: 7-33.5m
Speed: 400-750rpm
Eff.: 60%
Power: Max.200kw
Handling solids: 65mm
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc

Tobee 300mm vertical submerged chemical pump is unique cantilevered design, The sump pumps doesnâ??t need any seal and seal water. The TP300TV pumps are preferred by many customers with special installation requirements and widely applied in sump. Its wear-resistant metal liner could handle abrasive slurries with rough particles and high concentration.
Tobee 300mm vertical submerged chemical pump Specification:
Size: 300mm
Capacity: 288-1267m3/h
Head: 6-33m
Speed: 350-700rpm
Eff.: 50%
Power: Max.200kw
Handling solids: 65mm
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc

65 QV-SP Vertical Slurry Sewage Pump is a cantilever sump pump,Which work submerged to transport high abrasive and high density slurries with large particles.It doesn't need any seal water. Hard metal lined or fully rubber lined fitted.High capacity double suction semi-open impeller design.and suction agitator is also available.

Heavy duty submerged slurry pumps are vertical, shaft driven centrifugal slurry pumps designed for transferring abrasive and high density slurries from sumps, pits and other submersible source. The position of the shaft of the vertical slurry pump is perpendicular to the horizontal plane, the pump end is under the water and the motor above the liquid level.

Features
-The rotor parts can be adjusted axially and supported by multiple points, so heavy duty cantilever sump pump can operate steadily and reliably.

-The pump adopts a long shaft structure and can be inserted up to 10 meters deep. Shaft coupling is safe and reliable. Convenient disassembly.

-The impeller is immersed in the medium when the pump starts, so it is easy to start, and there is no air exhaust problem.

-The outlet flange is a half movable flange for easy connection.

Series SP(R) slurry pump is centrifugal vertical sump pump, work under fluid. It widely
used for delivery abrasive, high density slurry with large particle in the metallurgy, mine, power plant, chemical, and other industry.

Shijiazhuang Jiemu Machinery Equipment Co.,Ltd is one of the leading private indenting firms of China having 15 years of experience in Mining, Fluid Transportation and Fire Emergency Field. It works on design theory of slurry pump and water pump, experimental researches of pump performance wear mechanism and new products developing, and involves in research, design, manufacturing and sales.