Lgj-100F Standard Type Freeze Dryer

Freezing and drying process of LGJ-100F (silicon oil heating) are finished in the same place (patented product). It changes the cumbersome operation of the drying process in the past, prevents the contamination of materials, and realized dry sublimation automatically. The model is equipped with shelf heating and has programmable functions. It can memorize freeze-dried curves for users to observe the lyophilization process of materials.ã??
ã??
This model is not only suitable for the freeze drying of bulk (liquid, pasty, solid) conventional materials, but also suitable for the drying of the vials materials. When the materials are ready for freeze-drying, they are put into in the vial, then begin freeze drying before the vial's lid unsealed. The capping device compacts the vials' lids after freeze drying to prevent secondary pollution, re-adsorb water, and facilitate long-term storage.

Model Number:
Portable Air Conditioner ((WT-F26 gray)
Power Type: DC
Use: Room
Condition: New
After-sales Service Provided: None
Warranty:1 year
Type: PORTABLE
Certification:CB, ce
Cooling/Heating:Cooling Only
Application:Car, Commercial, Garage, Hotel, Household, Outdoor, RV
Power Source:Electric, usb
Remote Control: Yes
App-Controlled: Yes

* PHOSCAST
Phoscast : Phosphate Bonded Castables

* PURPOSE
customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system.

BACKGROUND

* Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles.

* GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates.
Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion

* Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected.

APPLICATION
Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.

DC48V OffGrid Solar Air Conditioners in 4 models 9000 BTU 12000 BTU18000 BTU and 24000 BTU

These specifications include

Horsepower 1HP to 2HP
Cooling Capacity in Btuh
Power Input and Consumption in Watts
Power Supply DC48V
Climate Compatibility T1T3

DC48V INVERTER TYPE SOLAR AIR CONDITIONER OFF GRID 9000btu 12000btu 18000btu 24000btu

1HP 15HP 2HP
075ton 1ton 15ton

Power supply Battery DC DC48V4658V DC48V4658V DC48V4658V
Rated Cooling Capacity T1 Btuh 9000 340011600 12000 340012600 17300 410018000
W 260010003400 351010003700 507012005250
Power inputT1 W 6801801060 9802001200 14502201780
Rated Heating CapacityT1 W 29008003050 390010004100 525012005500
Power inputT1 W 830160950 11301801280 14002201830
Noise Indoor dBA 40 425 46

Outdoor dBA 51 52 55
T1 EER WW BTUW 3901320 3601225 350118
COP WW BTUW 3501190 3451175 3751280
Dehumidification capacity Lh 10 13 17
Refrigerant R410A R410A R410A

Type Rotary Inverter Rotary Inverter 2xRotary Inverter
Brand GMCC GMCC HIGHLY
Fan motor Indoor BLDC 15W BLDC 15W BLDC 45W
Outdoor BLDC 40W BLDC 40W BLDC 55W
Outdoor coil aNumber of rows 1 2 2
Max Design pressure DischargeSuction MPa 4315 4315 4315

Summary of Solar System Configurations

Working Time Night Solar Panel Configuration Solar Controller Battery Setup
4 hours backup 270W 2 360W 23 pcs 48V30A all setups 12V100Ah 4 or 12V150Ah 4
6 hours backup 360W 24 pcs 48V30A50A 12V100Ah200Ah 4
8 hours backup 360W 6 or 450W 23 pcs 48V30A60A 12V150Ah 48 or 12V200Ah 4
12 hours backup 360W 69 or 450W 3 pcs 48V40A80A 12V150Ah 812 or 12V200Ah 4
16 hours backup 450W 49 pcs 48V50A100A 12V150Ah 8 or 12V200Ah 812


Note The prices provided are for reference only and may be subject to change

This LGJ-10 Multi Manifold Standard Type Vacuum Freeze Dryer is widely used in medicine, pharmacy, biology, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.This model is suitable for experiment in laboratory and small amount production ,and it can meet the regular freeze dying requirements of the most laboratories.

Features of the LGJ-10 Multi Manifold Standard Type Vacuum Freeze Dryer

. All-in-one structure , small size, no external flange, easy to use, no leakage.

. All materials in contact with the product use inert materials to meet the requirements of the GLP.

. The cold trap and console are made of stainless steel, which is anti-corrosion and easy to clean.

. All stainless steel inflated /water release valve is designed and produced by our company, which is safety, anti- corrosion, no leakage.

. With sample pre-frozen function, large cold trap opening, no inner coil,and low temperature refrigerator is needless.

. Patented gas diversion technology, and strong ice holding ability.

. World- known brand compressors, high efficiency, long life, low noise.

. Well-known brand vacuum pump with a high pumping speed to achieve a higher ultimate vacuum.

. Vacuum pump protection function can set the cold trap temperature to protect the vacuum pump life.

. Professionally designed FD-LAB freeze-drying machine control system + SH-HPSC-I modular controller with high reliability and stability.

. Intelligent data recording system can real-time record and display the cold trap temperature curve, sample temperature curve, vacuum curve.

The LGJ-12 Standard /Top-Press Type Vacuum Freeze Dryer widely used in medicine, pharmacy, biology research, chemical industry and food production,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.LGJ-12 is suitable for experiment in laboratory or small quantity of production. It can meet the regular freeze drying requirments of the most laboratory.

Features of the LGJ-12 Standard /Top-Press Type Vacuum Freeze Dryer

. All-in-one structure , small size, no external flange, easy to use, no leakage.

. All materials in contact with the product use inert materials to meet the requirements of the GLP.

. The cold trap and console are made of stainless steel, which is anti-corrosion and easy to clean.

. All stainless steel inflated /water release valve is designed and produced by our company, which is safety, anti- corrosion, no leakage.

. With sample pre-frozen function, large cold trap opening, no inner coil,and low temperature refrigerator is needless.

. Patented gas diversion technology, and strong ice holding ability.

This LGJ-50FD Electric Heating Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.

Freezing and drying process of LGJ-50FD (electric heating) are finished in the same place (patented product). It changes the cumbersome operation of the drying process in the past, prevents the contamination of materials, and realized dry sublimation automatically. The model is equipped with shelf heating and has programmable functions. It can memorize freeze-dried curves and comes with u-disc extraction function for users to observe the lyophilization process of materials.

This LGJ-18 Multi Manifold Type Vacuum Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered. It is a kind of the small vertical freeze-drying unit with shelf heating and programmable functions.

Features of the LGJ-18 Multi Manifold Type Vacuum Freeze Dryer

With sample pre-frozen function, large cold trap opening, no inner coil,and low temperature refrigerator is needless.

Patented gas diversion technology, and strong ice holding ability.

World- known brand compressors, high efficiency, long life, low noise.

Well-known brand vacuum pump with a high pumping speed to achieve a higher ultimate vacuum.

Vacuum pump protection function can set the cold trap temperature to protect the vacuum pump life.

Applications of the LGJ-18 Multi Manifold Type Vacuum Freeze Dryer

Suitable for freeze-drying of bulk liquid, pasty, solid conventional materials. It can be equipped with a flask outside the drying chamber to dry the frozen material on the inner wall of the bottle. At this time, the flask is connected to the manifold as a container. The material in the flask is heated by room temperature, and the multi-manifold switch can be used to remove or install the flask at any time without downtime.

This LGJ-10FD Electric Heating Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc.


LGJ-10FD Electric Heating Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.


Freezing and drying process of LGJ-10FD (electric heating) are finished in the same place (patented product). It changes the cumbersome operation of the drying process in the past, prevents the contamination of materials, and realized dry sublimation automatically. The model is equipped with shelf heating and has programmable functions. It can memorize freeze-dried curves and comes with u-disc extraction function for users to observe the lyophilization process of materials.