Sq Type Microwave Motion Sensor

Description
Falcon is a radar sensor, which uses microwave doppler technology for activation of door. It can be mounted on all types of standard automatic doors. Falcon 2.0 is with unidirectionality function, to reduce the heat loss from building and save energy.
Function and Advantages
radar motion sensor for automatic door
Unidirectional and bidirectional detection optional
Intelligently opening & closing
High sensitivity and accuracy
For all kinds of automatic doors
TABLE OF SPECIFICATIONS
Technology: Microwave doppler radar
Transmitter frequency: 24.150 GHz
Transmitter radiated power: < 20 dBm EIRP
Transmitter power density: < 5 mW/cm�²
Min. detection speed: 5 cm/s
Supply voltage: 12V - 24V AC -/+10% 12V -24V DC +30%/-10%
Mains frequency: 50 Hz - 60 Hz
Max power consumption: < 2 W
Output: solid state relay(free of potential change-over contact
Current max.output: 2A(MAX)
Degree of Protection: IP54
Mounting height: 1.8 m to 5 m
Temperature range: -25'C TO +70'c
Dimensions: 80 mmï¼?L) * 60 mm(H)* 50 mm (W)
Angle of inclination: 0' to 90' (vertical direction); -30' to + 30' lateral direction)
Cable length: 3 M

AC Input Microwave Motion Sensor - Standard Version
AC Input Microwave Motion Sensors
Microwave Motion Sensors AC Input
HNS201
5.8GHz C-band microwave motion sensor, on/off control.
Operating voltage: 220,240V AC, 50Hz.(EU version)
120-277V AC, 60Hz.(US version)
Features
5.8GHz C-band microwave motion sensor, on/off control.
Operating voltage: 220,240V AC, 50Hz.(EU version)
120-277V AC, 60Hz.(US version)
Rated load: 200W @ 120VAC, (capacitive)
400W @ 200-277VAC, (capacitive)
Stand-by power:

-

Microwave Motion Sensor Antenna Module
Microwave Sensor
Microwave Motion Sensor
HNM01
Low cost.
5.8GHz C-band miniature transceiver.
Patch antenna, antenna gain: 2 dBi.
Beam aperture: 30
Features
Low cost.
5.8GHz C-band miniature transceiver.
Patch antenna, antenna gain: 2 dBi.
Beam aperture: 30
2 balanced mixer.
5dBm EIRP output power.
Receiver bandwidth: 1Hz ~ 2KHz.
Operating current(CW mode): 13.5mA@5V. Low power consumption(Pulse mode): Average current: 1.5mA typ.
Pulse width(min.):10~50 s(10kHz~2kHz) Duty cycle:10% DC
RoHS compliant
Tested to EN300 440

-

AC Input Microwave Motion Sensor - Standard Version
AC Input Microwave Motion Sensors
Microwave Motion Sensors AC Input
HNS201
5.8GHz C-band microwave motion sensor, on/off control.
Operating voltage: 220240V AC, 50Hz.(EU version)
120-277V AC, 60Hz.(US version)
Features
5.8GHz C-band microwave motion sensor, on/off control.
Operating voltage: 220240V AC, 50Hz.(EU version)
120-277V AC, 60Hz.(US version)
Rated load: 200W @ 120VAC, (capacitive)
400W @ 200-277VAC, (capacitive)
Stand-by power:

-

AC Input Microwave Motion Sensors
Microwave Sensor AC Input
AC Input Microwave Motion Sensor - Standard Version
HNS203
5.8GHz C-band microwave motion sensor, tri-level dimming control.
Operating voltage: 120277V AC, 50/60Hz.
Rated load: 400W@120VAC, (capacitive)
Features
5.8GHz C-band microwave motion sensor, tri-level dimming control.
Operating voltage: 120277V AC, 50/60Hz.
Rated load: 400W@120VAC, (capacitive)
800W @ 200277VAC, (capacitive)
Stand-by power:

-

AC Input Microwave Motion Sensor - Highbay Version
AC Input Microwave Motion Sensors
Microwave Motion Sensors AC Input
HNS203HB
5.8GHz C-band microwave motion sensor, tri-level dimming control.
Operating voltage: 120~277V AC, 50/60Hz.
Rated load: 400W @ 120VAC, (capacitive)
Features
5.8GHz C-band microwave motion sensor, tri-level dimming control.
Operating voltage: 120~277V AC, 50/60Hz.
Rated load: 400W @ 120VAC, (capacitive)
800W @ 200~277VAC, (capacitive)
Stand-by power: ?1w.
Dual-PD technology, real Da ylight mo nitoring function for built-in application.
Zero-cross point operation, protect the sensor relay against the in-rush current, secure the max. load and life time of the relay .
Detection range up to 18m in diameter.
Mounting height: 10~12m.
Operation temperature:-20+70
RoHS compliant.
IP rating: IP20.
Setting
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range.
In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold to enable or disable the sensor function.
"Disable": The sensor works always, even during daylight.
"50lux": The sensor works only in twilight.
"10lux, 2lux": The sensor works only in the dark.
Stand-by period
This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people.
"+" : means bi-level dimming control, the fixture never switch off.
Stand-by dimming level
This is the dimmed low light level you would like to have after the hold-time in the absence of people.
*0% means on/off control.
10%--Vdim=1.5Vdc 30%--Vdim=3.0Vdc50%--Vdim=5.0Vdc

-

AC Input Microwave Motion Sensor - Detachable Version + Remote Controllable
Standard AC Input Motion Sensor
Microwave Motion Sensors AC Input
HNS204
5.8GHz C-band microwave motion sensor, on/off control.
Operating voltage: 220~240V AC, 50Hz.(EU version)
120-277V AC, 60Hz.(US version)
Features
5.8GHz C-band microwave motion sensor, on/off control.
Operating voltage: 220~240V AC, 50Hz.(EU version)
120-277V AC, 60Hz.(US version)
Rated load: 200W @ 120VAC, (capacitive)
400W @ 200~277VAC, (capacitive)
Stand-by power:

-