Mixing Tank With Agitator Pump

V9-V10 Borewell Submersible Pumpset

Falcon Dlx. 250 mm ( 9 & 10) Borewell Submersible Pumpsets are powered by water filled, rewindable submersibleMotor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressureand rigidly locked in stainless steel stator shell. T-Bolt design in all motor ensures rigid construction.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles

Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow MRS series 27Mtr head per stage in radial flow series.
- FG 250 Cast Iron Bowl with CED Catted and SS-304 Grade Impeller in Mix flow FMC Series 22Mtr head per stage in
Mix flow series.
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set.
- Dynamically balanced rotating parts ensures minimum vibration and longer life.
- Designed for wide voltage fluctuations.
- Motor portion covered with corrosive resistance Stainless steel (SS 304) shell.
- More durability and hygiene & High operating efficiency.
- Specially designed thrust bearing to withstand high axial thrust load.
- Extremely hardwearing water lubricated bearing.
- Thread type motor construction ensures service feasibility.
- Designed for wide voltage operation.
- Best alternative for JET & Compressor pump set.
- Additional intermediate bearing in higher stage pumps.

Specification
- Power Range : 55 kW to 112 kW (75 HP to 150HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Speed : 2900 RPM
- Head Range : 12 mtr. To 300 mtr.
- Discharge Range : 3600 LPM to 960 LPM
- Outlet Size in Inch : 4.0" & 5.0"
- Degree of Protection : IP 58
- Maximum Starts Per Hour : 10 Times

V7 Borewell Submersible Pumpset

Falcon Premium 175 mm (7) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure and rigidly locked in stainless steel stator shell.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Cast iron casting bowl and SS-410 grade impeller in mix flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial
thrust loads.
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Special designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures services feasibility
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps

Specification
- Method of Starting : 3 ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 37.3 kW
- Power Range : 11.2 kW to 37.3 kW (15 HP to 50 HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Speed : 2880 RPM
- Head Range : 18 Mtr. To 650 Mtr.
- Discharge Range : 1860 LPM to 55 LPM
- Outlet Size in Inch : 2.0 , 2.5 , 3.0 & 4.0
- Degree of Protection : IP 58
- Direction of Rotation : Electrically Reversible -3ph
- Thrust Load : 11.2 kW -37.3 kW -8000 lbs
- Minimum Cooling Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

Submerged pump [1] is a positive pressure conveying vertical pump, which can effectively solve the problem of air resistance and cavitation. The explosion-proof level of the conveyed material determines the submerged pump products with different structure, working principle, classification, scope of application, product advantages and disadvantages and mode of operation, which can be simply divided into two categories of traditional submerged pumps (explosion-proof outside the tank 1 area, 0 area inside the tank is not explosion-proof) and new type of submerged pumps (explosion-proof outside the tank 1 area, explosion-proof inside the tank 0 area).
Submerged pumps are vertical pumps in which the impeller, pump body, and other flow-through parts are submerged in the material being conveyed, and are connected to the motor by a shaft. Submerged pumps are made according to the different needs of reaching into the length of the container. Submerged pump and material contact parts, generally according to the requirements of the material selection, metal and non-metallic materials. Such as 304, 316, 316L, engineering plastics, fluorine plastic and so on.

Slurry pump refers to speak refers to through the use of centrifugal force (pump impeller rotation) role of solid, liquid mixed media energy increase of a mechanical, electrical energy into the medium of kinetic energy and potential energy of the equipment. Mainly used in: mining, power plants, dredging, metallurgy, chemical industry, building materials and petroleum and other industry sectors.

Slurry pump conveys a mixture of solid particles containing dross and water. But from the principle of slurry pump belongs to a centrifugal pump, in the iron and steel enterprises are mainly used for converter dust water, blast furnace gas scrubbing water, continuous casting turbid ring water and rolling steel turbid ring water and other systems of slurry transport.

FEATURES .An agitator is provided to assist smooth suction of the pumping fluid .The side -flow, top- discharge keeps the motor cooling even the pump runs continuously .High chrome iron Semi -open impeller enables the pump to maintain its original performance OPERATING CONDITIONS .Liquid...

Model: 200HW-8
Lift: 8.0m
Suction: 5m
Displacement: 360m3/h
Speed: 1450 r/min
Power 11kw

CRLX series vertical mixed flow pump is a newly developed product with both homeland and overseas advanced experience in design and manufacture. It is used to deliver clear water, sewage with certain solid particles (such as iron scrap, sand, coal powder etc.) and industry waste water and seawater with corrosive. The temperature of liquid can not be above 80. It is widely used in original water works, waste water factory, metallurgy and steel industry (especially suitable for delivering oxygenation iron sheet water in swirl pool), power stationï¼?mine, civil project and farmland etc.

Performance Range
Capacity: 150-36000m3 /h
Head: 50 m
impeller stage: single stage.
rotor part: drawable or not drawable

Instruction of pump type
300CPLX-50A
300: Outlet diameter is 300mm
CP: Company Code, means produced by CREDO PUMP
LX: Vertical mixed flow pump
50: Max head is 50m
A: A,B,C separately represents that outer diameter of impeller is changed the first, the second and the third time.

1.Oil pump capacity: 4 liters Fuel tank

2.Voltage: 220V Motor output power: 35W Current: 0.35A

3.Pressure: 2.5MPa (conventional 15-20kg pressure can be)

4.Spit volume: 130-200CCMIN rated speed (min): 2800 50 / 60Hz

5.Use of oil viscosity range: 15-1000 c. st (thin oil)

6.The oil pump is suitable for resistance type / pressure relief system.

7.Simple and direct access to direct access 220V power supply (liquid level feedback / pressure feedback port)

8.Oil pump with a low oil level alarm, when the oil level is insufficient to advance the alarm, the timely addition of lubricants comes with pressure detection function, when the pressure is insufficient Will be issued when the alarm

9.Pump set time adjustment range, working time 1999 seconds, downtime 1-999 minutes. The interval can be interchangeable in minutes and seconds. Pump, working hours 1-999 seconds and downtime 1-999 minutes can be adjusted

According to mechanical equipment, with low noise, high efficiency, high pressure stability, simple operation, etc., for, machine tools, textile machines, elevators, Woodworking machinery gears, rail lubrication, chain, etc. lubrication, with the use of centralized lubrication accessories, so as to achieve no manual operation, concave when the quantitative automatic lubrication effect.