Synthetic Enamel Paints

Enamel Top Coat
Ritver E name l Top Coat Fast Dry is based on a drying oil Alkyd resin, containing Titanium dioxide. It is a fast drying product Topcoat enamel which is very versatile and can withstand wide range of temperatures. It has good adhesion and exhibits good gloss after drying.


GOOD FORM IRON-STEEL- GATES-IRON/METAL STRUCTURES-INTERIOR/EXTERIOR

PRODUCT INFORMATION

PRODUCT NAMEâ?¡ Sequoia 3000 Gloss Finish

DESCRIPTION Sequoia 3000 Gloss Finish is a premium solvent based high gloss finish, it is an oil-modified alkyd enamel
paint. It is easy to apply and forms a smooth, tough paint
film which has excellent gloss, fungus resistance and
durability.

USAGE For decoration and protection. Suitable for all types of
interior and exterior metal and wood surfaces

BENEFITS High gloss and excellent gloss retention
Excellent gloss fastness
Excellent durability
Washable

PACK SIZE 1 litre, 5 litres

COLOUR RANGE Refer to Sequoia 3000 Gloss Finish colour chart

PERFORMANCE GUIDE
CHEMICAL RESISTANCE
Resistant to mild chemical fumes. Special paint systems
required if surface is subject to constant chemical attack
HEAT RESISTANCE
Generally resistant to heat up to 0c. Discolouration will
occur after a prolong time if surface is constantly heated
WATER RESISTANCE
Resistant to normal atmospheric humidity present. Will
withstand repeated washing. Not suitable for surface
immerse in water
THEORETICAL COVERAGE
16-18 meter2 /liter. Note: Surface coverage will alter depending on condition
of surface to be paint

PRE-APPLICATION
SURFACE PREPERATION Generally all surfaces to be coated must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the
surface with sand paper or wire-brush and clean of dust. For optimal performance, new galvanized surface should be cleaned and degreased to ensure good adhesion

PREVIOUSLY PAINTED SURFACEâ?¡All loose and flaking paint film must be removed. Surface must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust.

RECOMMENDED PAINT SYSTEM
Types of Surface
Undercoat (1 coat) Finish (2 coats)
Wood REDWOOD white undercoat
Metal SEQUOIA
PROTECTIVE COATING OR NASA oxide
SEQUOIA 3000
GLOSS PAINT

PAINT APPLICATION THINNINGâ?¡ For normal use, thinning is not required. If required, add 1 part of white spirit (10%) to 10 part of paint. Note: Excessive thinning will affect the quality of the paint.
DRYTIME Touch dry : 2 hours
Hard dry/Recoat : 8 hours
CLEAN UP â?¡Clean all equipment with white spirit immediately afteruse. Allow empty container to dry prior to disposal.

PRODUCT DATA COMPOSITION â?¡Pigments: Lightfast organic pigment, lightfast inorganic pigment.
Blinder : Organic Alkyd
Solvent : White spirit

Product Description
Nolifrit Ground Coat Porcelain Enamel Frit Features:

1, With very good adhesion, can dissolve much iron oxide in metal surface, makes very strong combination with metal body.

2, Can be combined with cover coat in high level.

3, With very good elasticity and compressive strength. Prevent and decrease damage due to mechanical stress.

4, With less viscosity and surface tension, its good for escape of gas when firing. Reduce bubbles on cover coat. To ensure the smooth surface of enamel products.

5, With suitable expansion coefficient similar as steel plate.

ABOUT US
vitreous enamel coating porcelain enamel steel grates enamel glaze fritHunan Noli Enamel Co., Ltd

is the leader manufacturer of enamel frits & inorganic pigment in China.
Now we have 30,000 M/T enamel frits and 2,000 M/T inorganic pigments annual capacity, 10,000 M/T RTU(Ready to use) powder and electro static powder.
Our main products of enamel frits including ground coat, cover coat, transparent frit , matt enamel, direct on black frits and various cast-iron frits. High temperature inorganic pigment including Red& yellow, blue, green, black Oxide etc, widely used in porcelain enamel, ceramics, glass, coating,painting etc.
As an ISO9001:2008 certified manufacturer, we have strict quality control in the whole production process to guarantee the quality of products. We are supplying the best service for customer.
100% of Our goods are exporting to USA, Europe, Middle East, Southeast Asia, South America, & Africa.

FAQ
Q1. Are you factory or trading company ?
We are a factory.
Q2. Whats the MOQ ?
Inorganic pigment MOQ is 25kg, enamel frit, RTU powder and electronic static powder MOQ=200kg.
Q3. What is your principle for the samples ?
We offer free samples if you are willing to pay the shipping cost.
Q5. How about your delivery time?
A: Generally, it will take 15 days after receiving your advance payment.
Q6. What information should I let you know if I want to get a quotation?
A: Your base material, your application area (best to send your finished product picture), the physical parameters you require(acid resistance, adherence, color, etc) the quantity you need. If possible, you can send me your samples and we customize for you.
Q7.Why choose us?
1. Reaching a production capacity of 30,000 Tons/Year for Enamel frit, 10,000 Tons/Year for RTU & electronic static powder, 2,000 Tons/Year for Inorganic pigment.
2. 60% frits & pigment exported to US, Netherlands, Indonesia,Thiland, Vietanam, Korea, Chile etc 30 country.
3. Having over 30 technical experts of frits & pigment from domestic & overseas, focusing on technical development & product improvement.
4. Having complete quality control system, Strong technical supporting team is focusing on customer service in this world.