Diesel D6 Virgin Fuel Oil

D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators.

D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names.

Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400

Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil.

The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol.

D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.

D6

Origin: Russia
Quantity: 20,000.000 GAL/per month / 200,000,000 GAL/ per month

DIESEL D6 VIRGIN LOW POUR FUEL Oil

Minimum Quantity: 25,000,000 Gallon
Maximum Quantity 50,000,000 Gallon FOB

FOB Price: Gros 05.4 USD Net 0.50 USD
CFI Price: Gross 0.64 USD Net 0.60 USD

Diesel D6 Virgin Low Pour Fuel Oil is available in minimum quantities of 25,000,000 gallons and maximum quantities up to 50,000,000 gallons per week. Originating from Kazakhstan and Russian sources, delivery is available at Houston, Rotterdam, Vladivostok, or any other safe world port. Payment is to be made via MT103 Telegraphic Transfer. Inspection is performed by SGS or a similar accredited inspection company. Seller covers insurance for 110% of the shipment value. Commissions are $0.10 per gallon, split equally between Seller's Mandate and Buyer's Mandate (50% each).
Incoterms: FOB / CIF

PRODUCT: DIESEL D6 VIRGIN LOW POUR FUEL OIL

Quantity: Min 200,000,000 GAL SPOT & Annual Contract SPOT & Annual Contract Condition of Delivery: CIF Price: $0.75 USD Gross $0.70 USD NET Quantity: Min 200,000,000 GAL SPOT & Annual Contract SPOT & Annual Contract Condition of Delivery: FOB Price: $0.80 USD Gross $0.75 USD NET. Commission: USD 2 Buyer side/USD 2 Seller side

"Diesel D6 virgin oil" is not a standard term in the oil industry. However, based on common industry terminology and understanding, it seems you might be referring to a specific type of diesel fuel. Here's a general description that could apply:

Diesel D6 is typically classified under the category of middle distillates, which are refined products derived from crude oil. It is a specific grade of diesel fuel used primarily for automotive engines and industrial applications. The term "virgin oil" is not commonly used in this context; instead, "virgin" could imply that the diesel fuel is of high quality and meets certain specifications without being mixed or blended with lower-grade fuels.

Key characteristics of Diesel D6 may include:

High Energy Density: Diesel D6 is known for its high energy content per volume, making it efficient for use in diesel engines which are common in transportation (e.g., trucks, buses, trains) and industrial machinery.

Low Sulfur Content: Modern regulations often require diesel fuels like D6 to have low sulfur content to reduce emissions and comply with environmental standards.

Suitable for Various Climates: It is formulated to perform well in a range of temperatures and conditions, ensuring reliable operation in both cold and warm climates.

Industrial and Automotive Use: Besides transportation, Diesel D6 is used in various industrial applications where a reliable and efficient fuel source is needed.

For oil exporters, Diesel D6 represents a valuable product that can be sold to domestic and international markets where there is demand for high-quality diesel fuel. Exporting Diesel D6 requires compliance with international standards and specifications to ensure it meets the requirements of customers and regulatory authorities in the receiving countries.

Origin: Kazakhstan / Russia.

D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world, it has other names.

Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2% water and one- half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400.