Medical Oxygen

We Specializes In Supply Medical equipment such as :5L Medical Oxygen Concentrator Keyhub brand )
Detail information:
Power: 280W in average, less than 350W in highest level
Size: 305 300 535(LWH)mm
Weight: 14.5 kg
Outlet: 1
Output Pressure: 0.04-0.06 MPa
Oxygen Flow Rate: (0-5)L/min. Within (0-5)L/min, the oxygen concentration 90%
Noise: 48dB (A)
Advantage:
1. Fashionable appearance;
2. Lghtest in weight;
3. Smallest in size;
4. Easy to move with handle and wheels;
5. PSA technology, no need to add chemical materials;
6. High oxygen purity: 90%@5L;
7. Self-patentd core components
8. Energy-saving and econimical:more than 3 hour's oxygen inhalation just need 1 degree electricity.
MQO: 500 PCS .
Made in China

medical oxygen Oxygen connector
1.5M/1.8M/2M/5METC

Medical grade
PIC/S GMP factory

OXYGEN CYLINDERS 150 Bar, Valve: GF-6A, Certificate: ISO9001/ISO13485.

PART # SERVICE
PRESSURE WATER
CAPACITY DIAMETER LENGTH WEIGHT OXYGEN
ã?? psi bar lbs liters in mm in mm lbs kgs cu ft liters
M6 2216 153 2.3 1 3.19 81 11.81 300 2.18 0.8 6 170
M7 2015 139 3 1.4 4.37 111 9.45 240 3.53 1.6 7 198
M9 2015 139 3.7 1.68 4.37 111 11.03 280 3.86 1.75 9 255
MD 2015 139 6.2 2.8 4.37 111 16.65 423 5.51 2.5 15 425
Jumbo D 2216 153 8.8 4 5.42 133 17.32 440 8.8 4 22.9 647
M22 2216 153 8.5 3.9 5.24 133 16.93 430 8.6 3.9 22 623
ME 2015 139 10.0 4.55 4.37 111 25.63 651 7.72 3.7 24 680
M33 2216 153 12.8 5.8 6.89 175 15.75 400 14.1 6.4 33 935
M42 2216 153 16.5 7.5 6.89 175 19.29 490 16.75 7.6 42 1189
M60 2216 153 23.2 10.5 7.28 185 23.1 587 22.92 10.4 60 1699
M90 2216 153 34.7 15.7 7.28 185 32.7 831 30.86 14 90 2549

GAZTRON engineering private limited We are manufacturers and exporters, authorized, distributor of Medical Oxygen Generator Plant in India.

Oxygen generator uses molecular sieve pressure swing adsorption principle, takes air as raw material, and absorbs nitrogen and other gas components to improve oxygen concentration to produce oxygen-enriched air. Oxygen concentration ranges from 90% to 96% (VA/), which can provide oxygen for therapy or relieve discomfort caused by hypoxia. When the equipment works, compressed air is injected into a closed adsorption tower filled with molecular sieve, which causes the pressure in the adsorption tower to rise. With the increase of environmental pressure, the molecular sieve absorbs a large amount of nitrogen in the compressed air, while oxygen in the compressed air still exists in the form of gas and is collected through a certain pipeline. This process is often referred to as the "adsorption" process. When the nitrogen adsorbed by the molecular sieve in the container reaches the critical state of adsorption saturation, the adsorption tower is blown to reduce pressure. With the decrease of environmental pressure, the ability of molecular sieve to adsorb nitrogen decreases, and nitrogen is released back to the gas phase from the molecular sieve and discharged as waste gas. This process is often called "desorption". In order to ensure the continuous and stable output of oxygen, the oxygen generator usually adopts two (or more) molecular sieve adsorption towers, which are controlled by rotating separation valves, so that one adsorption tower is in the adsorption process while the other adsorption tower is in the desorption process, and the two work alternately to complete the continuous oxygen production process.

Water capacity 46.7 Litre , weight 50 kg , 7 Cubic gas , 5.3 MM

we are provide medical oxygen cylinder 46.7 litres water capacity & gas 7 cubic and also provide 10.2 litres water capacity , gas 1.5 cubic