Miners' Lamp

EU ATEX certified products.
Adopting advanced light source: The fourth generation of solid light source makes its brightness, energy consumption, service life up to 100 thousand hours, maintenance free, and no frequent replacement of the bulb troubles
Suitable for all kinds of charging rack: With high precision constant current and constant voltage management circuit, it can be charged on any 5-10V charging rack
Detection of charging stat and indication function: When charging is not full, the red indicator light is on, otherwise, the green indicator light is on.
Automatic switching function of main and auxiliary light source: The main lamp can automatically switch to auxiliary lamp after the battery voltage drops to a certain value, so as to protect the battery from excessive discharge, prolong the battery life and the lighting time
Better heat dissipation: High quality aluminum cup is adopted to improve the heat dissipation efficiency and prolong the service life of LED

They own europe coal mine explosion-proof certificate -atex. Main light adopt led, has a high brightness and long life span. The switch of headlamp adopts light-touch electronic switch, good seal and easy to use. With the microprocessor control chip inside, it has multi-function for self-protection, intelligent managing the process of charging and discharging, and can be charged by all kinds of chargers. It has li-ion battery pack, which has no memory, free of maintenance, environment protection, safe and reliable. The product is widely used for lighting in the environment where flammable and explosive gases exist.
1, atex certification.
2, 25 yrs specilized in miners cap lamp.
3, lighting time>11 hours; max illumination>2200lx.
4, ip65 protection grade;explosion proof & waterproof; lithium manganic.
5, service life>2yrs; rechargeable battery-lithium manganic.
6, 0.2 kg; rated voltage 3.7v.
7, we also welcome customized.

Kl4ex
1, en atex certification.
2, 25 yrs specilized in miners cap lamp.
3, lighting time>15 hours; max illumination>4300lx.
4, ip54 protection grade;explosion proof; lithium manganic.
5, service life>2yrs; rechargeable battery-lithium manganic.
6, 0.65 kg; rated voltage 3.7v.
7, we also welcome customized.
8.Constant current driving.

Serial No Parameter Name Unit Value
1 Rated Voltage V 3.7
2 Rated Capacity Ah 4
3 LED Working Voltage V 3.7
LUX Main LED Continuous Runtime 8h lux ú+1000
Continuous Runtime more than 11h lux ú+500
Sub LED Continuous Runtime 72h lux ú+20
Continuous Discharge Time Main LED h ú+20
Sub LED h ú+100
Lifetime h ú+50000
4 Battery Charging Voltage V 5
Charging Current A 1
Charging Time h 8
Battery Lifetime Circle ú+600
5 Battery Case Size Long mm 110
Width mm 80
High mm 35
6 Weight g 600
7 Guard Against Explodation Style Exs I

KL11LM A&B corded miner lamp 30000lux strong brightness


Contains of 1pc Cree LED as the middle light and 4pc as Auxiliary light. Having strong brightness capability with long last lighting time tenure. As known by lowest weight 722g, low usage consumption and high safety. The special battery housing receiver can be installed during mining accidents or normal using underground. We also can provide OEM, ODM special mining lamps according to customerâ??s need.

Features:

- Battery capacity 11.2AH rechargeable Li-ion battery.
- Brightness 30000lux.
- Life span 100000 hours.
- More than 18 hours of working time and 1200 cycles of battery lifetime.
- One Year warranty with free maintenance up to (One Year).

china coal0001
18660760281
5.Mining Cordless LED Miners Cap Lamp
Keywords:mining cap lamp, cordless mining lights, mining lights for sale , underground mining headlamps , rechargeable mining cap lamps, led mining lights for sale , cordless mining cap lights
Introduction of Mining Cordless LED Miners Cap Lamp
1.Highest dust protection and submersible water protection
2.Very low maintenance to significantly reduce your lamp room cost
3.Strong protection from over voltage, over current, over charge and over discharge
4.High light output in mining level and three operating modes for different applications
5.Exceptional strength and rugged structure designed for the harshest mining environment
6.Adjustable angle to point wherever you see, near or far??to read and write, repair equipment of check the ceiling, significantly reducing dead corners
7.Free you from the inconvenience of electrical cable and burden of a battery pack and also eliminates the possibility of any accident by bumping or snagging cable cord.
Parameter of Mining Cordless LED Miners Cap Lamp
Technical  Data  
ItemParameters
Battery Capacity 2.8Ah
Rated voltage 3.6V
Main light lighting > 15 Hours
Auxiliary lights lighting > 30 Hours
Charging time < 5 Hours
Battery lifetime > 500 cycle times           1,000 cycle remain 75%
LED Main light Power 1 W
Luminous flux >80 lm
Illuminance                    (1 m distance) 2500 Lux  start
1000 Lux  After 11 hours
Lifetime > 30,000 Hours
Working current 200mA
Charger Input voltage AC 110-250V  50-60Hz
Output voltage DC 4.6V
Output current 0.6A

They own europe coal mine explosion-proof certificate -atex. Main light adopt led, has a high brightness and long life span. The switch of headlamp adopts light-touch electronic switch, good seal and easy to use. With the microprocessor control chip inside, it has multi-function for self-protection, intelligent managing the process of charging and discharging, and can be charged by all kinds of chargers. It has li-ion battery pack, which has no memory, free of maintenance, environment protection, safe and reliable. The product is widely used for lighting in the environment where flammable and explosive gases exist.
Kl6ex
1, atex certification.
2, 25 yrs specilized in miners cap lamp.
3, lighting time>16 hours; ip54 protection grade;explosion proof; lithium manganic; service life>2yrs; max illumination>5000lx.
4, 0.65 kg; rated voltage 3.7v
5, we also welcome customized.

They own europe coal mine explosion-proof certificate -atex. Main light adopt led, has a high brightness and long life span. The switch of headlamp adopts light-touch electronic switch, good seal and easy to use. With the microprocessor control chip inside, it has multi-function for self-protection, intelligent managing the process of charging and discharging, and can be charged by all kinds of chargers. It has li-ion battery pack, which has no memory, free of maintenance, environment protection, safe and reliable. The product is widely used for lighting in the environment where flammable and explosive gases exist.
Kl6ex
1, atex certification.
2, 25 yrs specilized in miners cap lamp.
3, lighting time>16 hours; ip54 protection grade;explosion proof; lithium manganic; service life>2yrs; max illumination>5000lx.
4, 0.65 kg; rated voltage 3.7v
5, we also welcome customized.

Kl4ex
1, en atex certification.
2, 25 yrs specilized in miners cap lamp.
3, lighting time>15 hours; max illumination>4300lx.
4, ip54 protection grade;explosion proof; lithium manganic.
5, service life>2yrs; rechargeable battery-lithium manganic.
6, 0.65 kg; rated voltage 3.7v.
7, we also welcome customized.
8.Constant current driving.