Frp Waterproof Polymer Coating

As two-component polymer water-borne waterproofing coating, it uses high quality polymer emulsion and cement as main raw materials with various inorganic materials and auxiliaries..

Advantage:
1. Strong adhesion.
2. Strong water resistance.
3. Excellent crack resistance.
4. Suitable for multiple environments.
5. Eco friendly.

Application:
Roof, wall, kitchen, bathroom, balcony, terrace and other non-exposed waterproofing projects.

Reference dosage:
1.0-1.4kg/sqm for 1mm coating

Specification:
25kg/barrel (emulsion) & 20kg/bag (powder)

Environmental protection products, water-based tasteless, convenient construction, wide range of application, the construction of complex parts has obvious advantages.

After curing the formation of non-joint, complete elastic waterproof layer, improve the waterproof and impermeability of construction engineering, is rolls material. Itâ??s impossible to reach the product.

The film has high strength and elongation, and has strong adaptability to cracking or expansion of the base.

The maintenance is convenient, only to the damaged part partial maintenance, still can achieve the original waterproof effect.

This product has bright color, can play the role of decoration and beautification, the moisture content of the base is not strict, wet base surface can be constructed.

Polymer-cement waterproof coating is a kind of two-component waterproof coating composed of synthetic polymer emulsion and various additives, which is composed of liquid and matching powder. It is a kind of waterproof material with high elasticity of synthetic polymer materials and good durability of inorganic materials.
It has the characteristics of rigidity and flexibility, and has the extensibility of polymer coating film, water repellency, and high strength of hydraulic cementing material.
Good water resistance, easy to wet base bonding
Good flexibility, can resist the slight vibration of the building structure and a certain degree of displacement, and can be applied on the wet base and firmly bonded
Water-based materials, non-toxic and harmless, non-polluting are environmentally friendly mater.

Tearing Strength: KN/m no less than 25

Standard Export Packing

JS waterproof coating is a two-component waterproof coating composed of organic polymer emulsion (such as acrylate emulsion and various additives) and inorganic powder (such as cement, quartz powder, etc.).

Polythene polymer Compound Waterproof Membrane

High polymer polyethylene polypropylene compound waterproof membrane is made from non-woven fabrics,polypropylene and high grade Polyethylene raw material, is a kind of compound type waterproof material with 4 layer flaky materials of enhanced protective layer, ageing resistance layer, waterproofing layer and tackifying and enhanced layer by adding additives .
High polymer polyethylene polypropylene compound waterproof membrane is made by multiple-ply different materials, so its performance has been enhanced significantly, especially its aging and weather resistance layer enables the membrane possess more longer service life with up to 50 years.
Both the upper and lower surfaces of it is rough, and non-woven fibers were irregular cross-structure to form three-dimensional mesh so that it has high tensile strength, permeability and good low temperature flexibility, small swelling and friction coefficient and low temperature effect, with strong deformation adaptability, which can be used in conjunction with a variety of adhesives and has a good bonding effect.
High polymer polyethylene polypropylene compound waterproof membrane is a series of polyethylene resin for waterproofing membrane, and it is a non-toxic, pollution-free green product

Fields of application:
The series-XM115-150 multilayered polymer polyethylene fiber waterproofing membrane is suitable for various industrial , civil building roofing , underground waterproofing, and metallurgy , chemical industry , water conservancy, environmental protection , mining and other seepage control projects.

Wet laid method: Base plane treatment ? Scraping coat and preparation polymer cement slurry (sand) ? Node details treatment (attached layer) ? Laid waterproof membrane ? half header treatment ? The waterproof layer inspection ? protective layer's construction

PVC Tarpaulin- Durable, Waterproof, and Versatile Protection
-Origin: Vietnam
-Material: High-quality Polyvinyl Chloride (PVC)
-GSM Range: 350 - 700 GSM
-Colors Available: Blue, Green, Grey, Black, White, or customized
-Size: Customized upon request
-Coating: Double-sided PVC coating

Features:
-100% Waterproof and weather-resistant
-UV-resistant and anti-aging
-Tear-resistant and flame-retardant (optional)
-Excellent flexibility and strength
-Long-lasting durability (3-5 years under proper use)

Applications:
-Truck and container covers
-Industrial and construction site covers
-Agricultural uses (shade, ground cover, etc.)
-Outdoor tents, awnings, and canopies
-Swimming pool covers and water containment

-Packaging: Rolls or folded in bales/cartons, customized labeling available
-Export Markets: Currently exporting to Europe, Middle East, and Asia

The self-adhesive modified asphalt waterproofing membrane is a self-adhesive waterproof material which is made of an elastomer such as SBS and an asphalt, a polyethylene film, an aluminum foil as a surface material or a film (double-sided self-adhesive), and an anti-adhesion barrier layer.
Self-adhesive rubber asphalt waterproofing membrane is a new type of building waterproofing material with broad development prospects. It has excellent water impermeability, low temperature flexibility, extensibility and cohesiveness. In particular, it has self-healing properties, which are advantages not found in general waterproof materials, and can ensure superior waterproof quality of waterproof engineering.