Hthp Vertical Dyeing Machines

Vertical machin centar
Brand: Kuen da seiko
Model: VMC 1060
Year-2009

Vertical machin centar
Brand: Starway
Model: VMC 1060
Year-2006

Vertical machin centar
Brand: Starway
Model: VMC 1060
Year-2006

Vertical machin centar
Brand: Huey Long
Model: VMC 1880
Year of construction: 2008

SMDY ENERGY SAVING

The consumption of water, chemicals, electrical energy, thermal energy and the wasted water are important cost factors in every dye house. With this machine all these factors are dramatically reduced, measured and controlled. Right-first-time in dyeing is now assured by lower differences inside-outside the packages, while savings of electric energy, water, chemicals, steam and compressed air will bring extremely fast payback times over the initial investment cost.

New SMDY sizes are from 5 kg to 1500 kg. This machine with this particular pump and inversion group allows to treat polyester textured high density till 0,5 Kg/l as well as very soft material like silk 0,3 kg/l density in order to process every kind of material you can have in your dye house.

In particular can dye bobbin 1.8 kg cotton, 2,4 kg acrylic, polyester 4 kg or 10 kg tops or muffs, tow, flock or beams
Main advantages are:

Possibility to dye with liquor ratio from 1:3.5 using in to out single circulation with material not fully covered.

Reduce consumption of chemicals, dyes, water and steam due to low liquor ratio facility.

Reduce power consumption of main pump because pipes are designed to avoid losses of pressure so that main pump is exploited in the best way. High efficiency motor and inverter reduces power consumption as well. Possibility to dye also in traditional way: air pad, material fully covered and flow circulation in to out and out to in directions.



SMDY FEATURES:

Standard design and manufacturing features:

Nominal loading capacities from 5 to 1500 kg.


Pressure rating of 5.0 kg/cm2, up to 160C tempera-
ture, temperature lock at 140C.
Construction in AISI 316 stainless steel, for all the
part in contact with dyeing liquor.
Water protected motors (IEC Standards I).
Waterproof electrical equipment

Three-level safety systems..
Heat exchangers rated for 15.0 kg/cm2 operating
pressure.
Heating gradient 5C./minute (range 20-80C steam
pressure 6.0 kg/cm2) Cooling gradient 3C./minute
(range 130-108C water temp. 15C, pressure 1.5

kg/cm2).
Pneumatic lid lifting and lowering.

Rapid lid locking system.

This is our new SMDY yarn dyeing machine! Yarn dyeing, reinvented! 70% savings on electric energy 30% savings on water, chemicals and utilities Improved yarn dyeing quality Faster payback times Sustainable yarn dyeing.

Mild Steel Automatic Vertical Milling Machine

Machining centers manufacturing:Tengzhou Luzhong Machine Tool Co., Ltd
machining center main technical specifications:
SpecificationsUnitXH7125
Table sizemm900250
X-axis travelmm450
Y-axis travelmm260
Z-axis travelmm380
Distance from spindle axis to column surfacemm330
Distance between spindle nose and worktablemm50-430
The vertical tolerance of distance between  spindle nose and worktablemm0.02
X/Y/Z rapid traverseM/min6/5/4
Max.spindle speedrpm6000
Spindle taperBT30
Main motor powerkw2.2
X axis motor torqueN.m7.7
Y axis motor torqueN.m6
Z axis motor torqueN.m6
Tool capacity12 armless type tools magazine
Positioning accuracymm0.02
Repeat positioning accuracymm0.01
Machine dimensionmm220016502200
Machine weightkg1800

hermal deformation.
3 the pedestal, workbench. Lathe body and beam are made of ferrosteel with high strength and high abrasive resistance , tempering treatment, eliminate internal stress and deformation.
4. The guide surfaces of lathe body, beam and ram using accurate grinding¡¢good interface and high precision. Beams with hydraulic two-spot locking, feeding is large, without tremble.
5.Machine tools feeding is driven by ac servomotor, ball screw drive. The beam and vertical tool posts are covered with sealing shied which make the lathe more safe and easy to operate.
6.The main shaft of the lathe is driven by ac motor. With the 16 step speed changing mechanism to the main shaft. Achieved the workbench rotate speed range.
7 imported or home-made controlling systems can be adopted according to user¡¯s needs. Also can additional accessories for electric grinding head. Vertical lathe factory: dalian new earth machinery co., ltd, it is one of the largest vertical lathe manufacturer in china, the main products: conventional vertical lathes, cnc vertical lathes, cnc high-speed vertical lathe, vertical turning machines, china vertical lathe and so on.