Please click here to check who's online and chat with them.

Crushing Shaft Group Used In Crusher

Supplier From China
Nov-23-20

The crushing shaft group is the main component of the crushing material, which is composed of the cutter body, cutter tooth base, crushing shaft, fastening assembly, fixing seat and other structures. After the test, it is sent to the user. What details should be paid attention to when it is put into installation operation?

1. Place the crushing box horizontally, remove the top cover, remove debris and apply anti-rust oil on the processing surface. Place the broken shaft set smoothly at the gap.

2. Use grease to empty the inner period of the rubber hose for filling bearing seat. Connect the manual dry oil station with the rubber hose for bearing seat until the labyrinth ring at both sides of the bearing seat in the crushing box spills oil.

3. Install pressure plates and dust cover plates on both sides.

4. The rise and fall of the crushing shaft set is controlled by two hydraulic jacks. Before adjusting the crushing shaft set, the tensioning screw should be adjusted to make the belt in a relaxed state. Pull out the lock pin and loosen the wedge with the jack top to adjust the crushing shaft set to the required height. Then wedge the wedge and adjust the tensioning screw so that the belt is in tensioning state, then insert the locking pin.

During the operation of the broken shaft group, a large amount of coal dust is likely to be generated, which seriously affects the work safety and personal safety. Therefore, dust removal and dust removal should be carried out timely. Henan Shuanzhi produces crushing shaft set and its accessories, welcome to inquire.

Price and Minimum Quantity

Price: $3000
MOQ: Not Specified

Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: Crushing Shaft Group Used In Crusher

Nov-07-20
Supplier From JiaozuoCity, Henan Province, China
 
23P03 crushing shaft is the main part of the crushing material of PLM1000 wheel crusher. The whole machine has great crushing capacity, high strength and rigidity, and is safe and reliable. The bearing adopts manual dry oil station for centralized lubrication to extend the refueling cycle.

23P03 crushing shaft group is mainly formed by the short technology of the knife body on the crushing shaft and the crushed material to impact and crack the coal, and then the speed difference between the knife tooth base, scraper chain and crusher is made to further roll and pull the crushed coal, so as to achieve the purpose of crushing the coal.

After installation, it shall be checked that the rotating part of 23P03 broken shaft set shall not contact with any other parts in the box body; The distance between any particular point of the rotating part of the crushing shaft set and the side wall of the crushing box shall be equal on the circumference of the crushing box; The fastening bolts between the cutter body and the cutter tooth base shall not be loosened, and the cutter body shall not be cracked. If the crushing shaft is rotated manually, it shall be stable without abnormal sound; The belt grooves on the belt pulley have no bump marks; Prepare for complete machine test in conjunction with its components.

To determine the manufacturer of 23P03 broken shaft, it is necessary to consider the material process experience. Henan Shuanzhi do quality manufacturers, now should the market demand spot supply, welcome to the factory consulting investigation.
Oct-01-20
Supplier From JiaozuoCity, Henan Province, China
 
The crushing machine series of mine scraper conveyer is mainly used in combination with the transferring machine and complete the conveying task of underground comprehensive mechanized coal mining with belt conveyer, scraper conveyer, shearer and hydraulic support.

The models of mine crusher are PCM, PEM, PLM, etc. They are respectively represented as hammer crusher, jaw crusher, wheel crusher, etc. According to different working face and production capacity of mine, different crushing capacity of crusher is required. For example, PLM3000 wheel crusher has crushing capacity of 3000T /h. PLM4000 wheel crusher with crushing capacity up to 4000T /h.

The crushing shaft group is the main component of the crushing coal and gangue. Using the broken shaft set higher rotational inertia stored at rated speed kinetic energy by installing group on the shaft of the broken blade and the broken material short contact time and impact break coal formation, again by cutter tooth and scraper chain, crusher, the speed difference between further to crush was broken coal, so as to achieve the goal of broken coal.

Shuangzhi Coal machine focuses on the production and manufacturing of spare parts of scraper machine, transferring machine spare parts and crusher spare parts for mine. It is located in Zhengzhou with developed logistics. At present, it cooperates with major mining areas all over the country.
GOLD Member
VERIFIED
Oct-30-23
Buyer From Manningtree, Essex, United Kingdom
Sep-25-20
Supplier From JiaozuoCity, Henan Province, China
 
The crushing shaft is composed of crushing shaft, cutter tooth base, cutter tooth, flat key, bearing, seal and fastening bolt. The strong rival of coal "big block" is broken shaft group, today we are going to introduce this "strong rival"!

Trough crusher is used with the transfer machine, using the high speed rotating hammer head to impact and squeeze large raw coal, so as to achieve the required particle size. The crushing shaft assembly is the key component of the crusher, which requires high precision and high stiffness. The middle part of the spindle is equipped with hammer head, which is directly involved in impact crushing. Its performance is the key. Due to the large impact load of the hammer head, high rotation speed, the use of mining is extremely bad, so the performance of the hammer head largely determines the reliability of the crusher.

Main parts function, structure characteristic and installation and maintenance of broken shaft

1. The rotating part of the crushing shaft assembly shall not contact with any other parts in the box body.

2. The distance between any particular point of the rotation part of the crushing shaft set and the side wall of the crushing box is equal on the circumference of the crushing box.

3. The fastening bolts between the cutter body and the cutter tooth base shall not be loosened, and the cutter body shall not be cracked.

4. Manual rotation of the crushing shaft should be smooth and sound.

5. There is no bump mark in the belt groove on the pulley.

6. Prepare for complete machine test in coordination with other parts.
GOLD Member
VERIFIED
Jun-20-11
Supplier From Rajkot, Gujarat, India
GOLD Member
Feb-26-25
Supplier From Busan, South Korea (Republic Of Korea)
 
The CAT988 with the 3408 engine is a powerful machine designed for heavy-duty applications, including container handling. Here are some key specifications:
Engine: CAT 3408 DITA (Direct Injection Turbocharged Aftercooled)
The CAT 3408 engine is a V8 engine, meaning it has 8 cylinders arranged in a V configuration.
Net Power: 538 hp (SAE J1349:2011)
Engine Power: 580 hp (ISO 14396:2002)
Gross Power: 588 hp (SAE J1995:2014)
Maximum Capacity: 50,000 pounds (as indicated on the boom arm in the image you provided)
Fuel Efficiency: Features like Economy Mode help save on fuel while maintaining productivity
Durability: Built with advanced filtration systems for extended performance and reliability
Productivity: Superior digging, higher bucket fill factors, and reduced dig times
GOLD Member
VERIFIED
Mar-19-20
Supplier From Bangalore, Karnataka, India
GOLD Member
VERIFIED
Apr-25-25
 
Ultralfine grinding mill machine pulverizer ,Widely used for ultrafine grinding of dry materials in various industries such as traditional Chinese medicine, western medicine, pesticides, biology, cosmetics, food, feed, chemical industry, ceramics, etc. Especially for fibrous and high toughness materials such as cordyceps, tea, and lingzhi, the crushing effect is more perfect.
Crushing particle size 1-75um ,capacity 70-10000kg/hour.
Welcome cooperate!
GOLD Member
Feb-25-25
Supplier From Busan, South Korea (Republic Of Korea)
 
CASE MW36 Wheel Loader - Typical Specifications
Operating Weight: Approximately 3,200 to 3,600 kg (about 7,000 to 8,000 lbs)
Bucket Capacity: Generally around 0.65 to 0.9 cubic meters
Dimensions:
Overall Length: Approximately 4.0 m (varies with configuration)
Width: Roughly 2.5 m
Height: Around 3.0 m
Lift Height: Typically in the range of 2.5 to 3.0 m
Transmission: Options may include hydrostatic or mechanical drive, depending on the model configuration
Additional Features:
Ergonomic operator station
Versatile hydraulic system for various attachments

Verification Status