Gigabit Ethernet Media Converter 550M

Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter

SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly.

Features:
Web, SNMP, Console management
Hot-swappable module
Available with ST, SC, or WDM Simplex SC single-fiber connectors
Auto MDI/MDI-X on copper port
Auto-negotiation on copper port
LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision
Link-Fault Signaling illuminates to indicate link failure
Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link
Local and remote loopback

Technical parameter
1. According with IEEE802.3ab/z, IEEE 802.3u, IEEE 802.3X, IEEE802.1Q, 10BASE-T, 100B ASE-TX, 1000BASE-TX, 1000Base-SX, 1000Base-LX standard.
2. Support TCP/IP, PPPOE, DHCP, ICMP, NAT protocol.
3. Flow control: Full-duplex adopt IEEE802.3X, half-duplex adopt Backpressure standard.
4. Electricity port support auto-negotiation function, autoconditioning transmit mode and transmit speed.
5. Port supply Auto-MDI/MDIX automatic reverse.
6. Support storage transmit mode, cashe capability is 256K.

7. Support electricity port's 1000M mode or self-adapt mode's switch.
8. Support state indicator, external power(output 5V~50Hz 1A)
9. Interface: Electricity port: RJ-45 fiber: SC
10. Twisted-pair: Cat. 5 Cat. 6
11. Singlemode fiber: 8/125, 8.3/125, 9/125um
12. Working temperature: 0~50 degree
13. Storage temperature: -20~70 degree
14. Humidity: 5%~90%
15. Size: 32*128*158mm (H*W*L)

Specification
Connect type: SC
Fiber type: Singlemode
Wavelength: 1310/1550nm
Typical distance: 20KM
Min TX PWR: -6.0dBm
Max TX PWR: 0.0dBm
Sensitivity: < -22dBm
Link budget: 16.0dBm


Size: 32*128*158mm (H*W*L)
1KG/pair

Experience seamless power transitions with the EATON ATC3C2X20200 transfer switch, designed for reliable and efficient operation in a variety of settings. With a robust 200A rated amperage, this switch is built to handle the demands of heavy-duty power generation systems. Crafted by the trusted brand EATON, this model is a testament to durability and quality in the realm of generators and power generation. The ATC3C2X20200 is engineered to provide a secure connection and easy switching between power sources, ensuring that your equipment remains powered and operational when you need it most.

Media converter

Parameter
Specifications
Access mode
10/100mbps
Standard
Ieee802.3 10base-t ethernet, ieee802.3u, 100base-tx/fx fast ethernet, ieee802.3x flow control, ieee802.1q vlan, ieee802.1p qos, ieee802.1d spanning tree
Wavelength
850nm/1310nm/1550nm
Transmission distance
Single-fiber single-mode: 25/40/60/80/100km ; category-5 twisted pair: 100m
Port
One rj45 connector, connected to stp/utp category-5 twisted pair one fiber port: multi-mode - sc or st (fiber size: 50, 62.5/125µm) single mode - sc/fc fiber port (fiber size: 9/125µm) single-fiber single-mode - sc/fc fiber port (fiber size: 9/125µm)

Conversion mode


Medium conversion, storing and forwarding

Mac address table


I k

Buffer space


1mbit

Flow control


Full duplex state: flow control; half duplex state: back pressure mode

Delay


9.6us

Bit error rate


<1/1000000000

Mtbf


100, 000 hours

Led


Power tx link ( fiber link action ), tp link1000, tp link100, tp act ) fdx (fx full duplex mode), fx100 (fiber, with a transmission rate of 100m) tp1/2/3/4 link/act (1/2/3/4-port twisted pairs connection action) tp1/2/3/4100 (1/2/3/4-port twisted pairs, with a transmission rate of 100m)

Power


Ac220 0.5a/pc-48(builtin)

Power consumption


5w

Operating temperature


-10~55ºc

Operating humidity


5%~90%

Storage temperature


-40~70ºc

Storage humidity


5%~90% (non-condensing)



Dimensions


140mm * 111 * 30mm(in) 95 x 70 x 26mm(out)

Media converter

Two 10/100m electrical ports, one single-mode or multi-mode optical port
Multi-mode transmission distance: 2km, single-mode transmission distance: 120km, single-strand double-directions /double-strand double-directions.
Set - in 1m cache, supporting 2k mac address self-learning and self-updating capability
Supports forcible execution the cross of 10m, 100m, full-duplex, half-duplex, twisted-pair and automatically adapt to connect auto mdix function directly
Supports rate control function and the rate can been controlled between nx64k (n=1~1600) to 100mbps
Supports renovate system automatically function, support system regular refresh automatically via setting time, protect from system halted
Supports management based on web, snmp, telnet or local console
Supports lld(search disconnected link automatically), llr(return alarm message when disconnected link found)
Supports llcf(report the disconnected alarm message to local network administration)
Detect and control the operational states of electrical port and optical port of the near end and the far end via interface of management
Supports open or close electrical and optical ports through via the far end network management
Supports legal maximum packet size up to 1912 bytes, support cisco, isl and vtp
Physical property:
Input power: ac 100v~220v or dc 48v
Dimension: 191mm x 110mm x 25mm
Environment requirements:
Operating temperature: 0¦-50¦
Storage temperature: -40¦-70¦
Environment humidity: 5-90%(non-condensing)


Export carton with inner box

-10/100M self-adaptive Ethernet Interface
-Support ATUO MDI/MDIX, allowing crossover cable connection or straight-through cable connection
-Selectable Baud rate between 1299bps and 921.6Kbps -Build-in WEB server, allowing users to configure their webpage easily
-Auto reconnection after a network break, ensure the reliable TCP connection for the whole network
-Support DNS, can achieve a communication using the domain name
-Compatible to SOCKET working modes (TCP Server, TCP Client, UDP and etc.), the upper layer machine software is written strictly following the SOCKET rules
-TCP modes supports multi connections, specific data sending after password verifying, allowing up to 4 user to manage a single embedded device at a same time
-Advanced security mechanisms, prevent illegal access from unauthorized visitors, provide IP verifying firewall, and up to 8 configurable IP or IP segment certifications
-Support the local and remote upgrading of the firmware;Support AT Command configuration;Support remote configuration
-16 bits ARM7 CPU;
-Ethernet: 10/100Mbps
-Protections: build-in 2KV surge protection
-Type:RS232, RS485
-Control Signals :TXD,RXD,GND
-Parity: None, Even, Odd
-Data Bit: 5, 6, 7 or 8 bits
-Stop Bit: 1 or 1.5 bits
-Flow Control: Non
-Baud Rate: 1200bps~921.6Kbps
-Compatible Protocol: Ethernet, ARP, IP, UDP, TCP, BootP
-Network Services: DHCP, DNS, PPPoE, TFTP, HTTP, UDP Broadcasting -Client/Server: Server
-Ethernet Connector: RJ-45
-Ethernet Speed/Duplex: Auto-negotiation 10/100Mbps, Full/Half duplex -Auto-MDIX: Yes -WOL: Magic Packet, Wakeup Frame, Link-Up events
-Software Tool: VSP Driver, DS Manager, Web Server
-Configuration Mode: Web browser configuration tool, Windows Hyper Terminal, Telnet, Serial port configuration
-Power Input: 3.3V DC
-Physical Size (Wí-Dí-H): 77.5í-41.7í-22.7(mm)

10gbps media converter, 90 to 240v ac, 12v dc adapter power source type
Specifications:

Interface:

Left side:

One 10gbps rj-45 port
One 10gbps sfp + port (mini-gbic)

Right side:

One rs-232 console port (rj-45 connector)
One power jack

Wire speed cable length: up to 100m cat6a cable for wire speed transmission
Transceiver (phy), teranetics chip for 10gbase-t and net logic chip for 10gbase-r
Temperature:

Main features
In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 1000 Base-TX, IEEE802.3z, IEEE802.3abstandard
Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and 4-way associative hash algorithm
Half duplex: back pressure flow control
Full duplex: IEEE802.3x flow control
Automatic identification of MDI/MDI-X cross line
Technical parameter:
Standard protocol: IEEE802.3 10 Base-T standard, IEEE 802.3u 1000Base-TX and IEEE802.3z standard
Connector: one UTPRJ-45 connector, one SC/ST connector
Operation mode: full duplex mode or half duplex mode
Power supply parameter:
Adapter(External): 110-265V AC input, 5V1A DC output
Power(Internal): 110-265V AC input, 5V1A DC output
Environmental temperature: 0 - 50
Relative humidity: 5%-90%
TP cable: Cat5 UTP cable
Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140ª¦m
single mode: 8.3/125, 8.7/125, 9/125 or 10/125

Dimensions:
Power external: 94mm(L)x 71mm(W) x 26mm(H)
Power internal: 150mm(L) x 110mm(W)x 28mm(H)