Description
1. Tough film and good adhesion on the concrete, able to penetrate into concrete.
2. Good resistance to water , brine and chemicals. Excellent mechanical strength and physical properties.
3. Good resistance to impact and abrasion.
4. Easy application , drying fast.
Prepare to use
1. Mix base and hardener by the mixing ratio and Stir thoroughly, then setting at least 15 minutes. Thinner may be used to reduce viscosity.
2. Remove all foreign particles, oils, grease , rust and moistures from the surface before application.
3. Two packs product, must be used completely during the duration of its pot life.
4. Donâ??t apply when the temperature is < 10â??,>40â??, relative humidity is >90â?? or the surface temperature of substrate is not higher than the dew point for at least 3â??.
5. If the coating interval is exceeded , the surface of base coat must be roughened to insure adhesion.
6. Keep away from heat, sparks and flame.
7. Stored with good ventilation.
8. Keep adequate ventilation during application.
9. The actual coverage may vary, depending on application technique, job conditions and type of surface. Under brushing & rolling application the actual coverage is estimated at 70% of the Theoretical coverage and 60% for spraying.
**The parts of data base above could be affect by application condition at job site, please reference guide specification or contact with relative technical personnel.
Color : Clear
Drying time :
Tack-free : 2 hours
Hardness : 8 hours
Full cure : 7 days (grease)
Supplier: Car paint, paint, paints coatings, wood coatings, epoxy, wood stainer, chemicals solvents, resin, white sprits non metallic minerals, dolomites, pigments, paint pigments, pigmnets for leather, pigments for textiles, pigments for metals, pigments for plastics, pigments for inks, wall putty, all types of virgin papers for all industries, kraft papers, color papers,etc, fork lifts, auto paint, epoxy floor paint, pu wood polish, nc sanding, emulsion paint, pva primer, washable silk paint, weather guard paint, eggshell paint
Supplier: Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,
