Supplier: Gel battery, lifepo4 battery, energy storage system, smart inverter, battery charger, solar charge controller, dc dc charger, mc4 connectors, solar cable Services: Manufacturer and seller
Technical Specifications
Np Power 3.5 kW Off-Grid Smart Inverter
Nominal Output Power 3500 Watt
Output Voltage 230V
Output Frequency 50Hz-60Hz
Efficiency 94%
Max. Charge Current 100A
Max. PV Charge Current 100A
Max. AC Charge Current 60A
Dc Input Voltage 24V DC
Rated Power 4000 Watt
Max. PV Input 500V DC
Working Temperature -10-55 Degrees
Dimensions 330*278*98 4.4 KG
2 Year Warranty
Main Technical Features
Technical Detail Value
Product Name Apex Eco 11 kW Smart Inverter
Output Power 11,000 Watt (11 kW)
Working Voltage 48V DC
MPPT Solar Charge Current 120A
PV Input Voltage 120V - 500V
AC Output 220V -Pure Sine Wave
Battery Compatibility Gel, AGM, Lithium (LiFePO4)
No Grid Connection (Off-Grid Only)
Display LCD digital display
Cooling Automatic fan control
Protection Systems Overload, short circuit, over temperature, low voltage etc.
Waranty 2 years
Single Phase
Technical Specifications
Feature Description
Maximum Power 6.2 kW (6200 Watt)
System Voltage 48V DC
MPPT Solar Charge Controller 120A (Wide Input Voltage Range)
Waveform Pure Sine Wave
AC Output Voltage 220-230V (�±%2)
Input Voltage (PV) 120V - 500V DC
Smart Modes Solar Priority / Battery Priority / Grid Priority
Sales to Grid Yes (On-Grid Hybrid Mode)
Display Large LCD screen + detailed menu
Protection Features Overload, short circuit, high temperature, low battery etc.
Technical Specifications
Np Power 6.2 kW Off-Grid Smart Inverter
Nominal Output Power 6200 Watt
Output Waveform Pure Sine Wave
Output Voltage 230V
Output Frequency 50Hz-60Hz
Efficiency 94%
Max. Charge Current 120A
Max. PV Charge Current 100A
Max. AC Charge Current 60A
Dc Input Voltage 24V DC
Rated Power 6500 Watt
Max. PV Input 500V DC
Working Temperature -15 -60 Degrees
Dimensions 358*295*105 - 8.7 KG
2 Year Warranty
Single Phase
BJ195DCE DC Energy Meters are mainly used to
measure the energy consumption for different load
connected to it. DC energy consumption for the loads
like telecom BTS (Base Transceiver Stations), solar
panel and any applications need DC power parameter
monitor. The meter calculated energy data by
connecting appropriate shunts in the loads circuit. The
voltage drop across shunt is fed to DC energy meter
input terminals. The millivolts across shunts are
converted into current depending upon the shunt ratio
used in circuit.
The DC Energy Meter is a micro-controller based product that measures DC voltage and
currents, power, energy data and displays them on a 7-Segment five digital LED display
with auto scrolling. Blue Jay can set the parameters of DC energy meter from the
customer request.
As the world wide aim is necessary to reduce the power consumption and optimization the
use of available power/energy supplies. The application of smart energy meters are seen
as ideal solutions by providing monitoring the energy consumption in an accurate manner.
BLUE JAY DC current panel meters with a DC
signal conditioner board combine high accuracy with
high read rate and a wide range of isolated output
options for computer interface and control. Accuracy
is 99.99% of full scale ±1 counts
DC ammeter operation provides four full-scale
current ranges 5.00A with 25mA resolution. The
5.000 A range measures can connect current shunt to
expand the measure range.. All current and ranges
are factory calibrated, without recalibrating the meter.
External current shunts are fully supported. Scaling is 75 mV - 5A, more than 5A will set transformer ratio
from the front panel of the meter. The scalable readout is four full digits up to 9,999 counts. Shunt is
remotely located for direct sensing. This allows the current carrying wires to take a more direct path to the
batteries and alleviates the need to route them through the meter case.
BLUE JAY DC voltage panel meters with a DC
signal conditioner board combine high accuracy with
high read rate and a wide range of isolated output
options for computer interface and control. Accuracy
is 99.99% of full scale ±1 counts
DC voltmeter operation provides and six full-scale
voltage ranges from 200.00 mV with 10 mV resolution
to 600.0 V with 5V resolution. The 200.00 mV and
2.000 V ranges provide a high input impedance of 1
Gohm to minimize the load on the voltage signal. All voltage and ranges are factory calibrated, without
recalibrating the meter.BLUE JAY DC voltage panel meters with a DC
signal conditioner board combine high accuracy with
high read rate and a wide range of isolated output
options for computer interface and control. Accuracy
is 99.99% of full scale ±1 counts
DC voltmeter operation provides and six full-scale
voltage ranges from 200.00 mV with 10 mV resolution
to 600.0 V with 5V resolution. The 200.00 mV and
2.000 V ranges provide a high input impedance of 1
Gohm to minimize the load on the voltage signal. All voltage and ranges are factory calibrated, without
recalibrating the meter.
2 in 1 meters measure average values of DC Voltage or DC Current. Any two different parameters can be measured in one case with this meter. It is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).
