Solar Controller

MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.
LCD display , easy to operate on LCD screen
Multi stage charging
(3-stage charging , parallel charging and equalized charging function)
BTS - Battery remote temperature sensor terminalEnable to charge Li-thium, Gel , lead-acid battery
With RS485 & USB communication port
Protection: PV array short circuit, PV reverse polarity, Battery reverse
polarity, Over charging, Output short circuit

Our Solar Charge Controllers are into 2 models: MPPT AND PWM

Range: PWM (From 20A - 60A), MPPT (From 20A - 80A)

MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.
LCD display , easy to operate on LCD screen
Multi stage charging
(3-stage charging , parallel charging and equalized charging function)
BTS - Battery remote temperature sensor terminal
Enable to charge Li-thium, Gel , lead-acid battery
With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse
polarity, Over charging, Output short circuit

Solar controller

Versions available: 20, 30amp
12/24 volt auto-work negative or positive ground
Microprocessor which is made in usa
Pwm or on/off series battery charging options
State of charge (soc) battery regulation
Battery ah setting, boost charging, equalising charging, float charging
Automatic load reconnection, manual load switch
Automatic selection of voltage (12 v / 24 v)
Temperature compensation
Lcd display: soc as a fuel gauge, all system parameters in digital value, system status as symbols
Full circuit protection, electronic fuse � field adjustable parameters by four buttons
Load control option: on/off, dusk-to-dawn, on + setting hours, setting time on/off. (for type �ii)
Real clock display


20pcs/carton

Solar Controller STIP-603 Series
PRIO-603 provides better performance for solar power station with LCD display, especially which needs remote control.

STIP - 603 Rating

Rated Voltage: 12/24 Volt or 24/48 Volt auto work
Rated Current: 30,40,50 or 60 Amps .

Equalisation voltage 14.8Volt
High voltage disconnect (HVD): 14.4Volt
Float voltage: 13.6Volt
Low voltage disconnect (LVD) 11.1Volt
Low voltage reconnect (LVR): 12.6Volt
self-consumption: 40mA maximum
Temperature compensation: -30mV/`C/12V
Terminals: for wire sizes to 16mm
Temperature: -35`C to +44`C .

* Microprocessor Which is made in USA
* PWM series charging mode
* RS232 communication relay, which can download data during the last 30 days
* With 1A/30V relay
* State of charge (SOC) battery regulation
* Battery Ah setting, boost, equalising, float charging
* Temperature compensation, with temperature sensor.
* Full circuit protection, electronic fuse
* Real clock display, chinese or English display option
* Option: remote digital temperature sensor 5m, RS232 cable 1.5m, PC software.

Solar Controller STIP-602 Series
Provides longer battery life and improved system performance. Sets new standards for reliability and self-diagostics

STIP - 602 Rating.

Rated Voltage: 12/24 Volt or 24/48 Volt auto work
Rated Current: 30,40,50 or 60 Amps.

Equalisation voltage 14.8Volt
High voltage disconnect (HVD): 14.4Volt
Float voltage: 13.6Volt
Low voltage disconnect (LVD) 11.1Volt
Low voltage reconnect (LVR): 12.6Volt
self-consumption: 40mA maximum
Temperature compensation: -30mV/`C/12V
Terminals: for wire sizes to 16mm
Temperature: -35`C to +44`C .

* Microprocessor Which is made in USA
* PWM or ON/OFF series battery charging options
* State of charge (SOC) battery regulation
* Battery Ah setting, boost, equalising, float charging
* Automatic load reconnection,
* LCD display: SOC as a fuel gauge, all system parameters in
digital value, system status as symbols
* Remote temperature sensor (option).

Typically for large-scale photovoltaic off-grid power systems, the specially designed high power photovoltaic intelligent controllers, multi-channel input array of PV modules, convergence to one output. For the battery charge and discharge management, according to the battery pack voltage changes, it automatically controlling components and modules connect or disconnect to maximize the use of solar energy, and also avoids battery overcharge or over discharge problem.

In addition, through the power controller multi-input, multi-chip components can be simply connected the controller to solve the traditional large-scale systems require multiple small controllers, complex parallel wiring, to avoid errors caused by lining issues.

According to off-grid photovoltaic power system and the different battery design, solar controller are divided into 24V, 48V, 96V, 120V, 192V and 240V and other specifications to meet different users' needs or program designer

Ws-c2415 6a 10a 15a solar charge controller
The wellsee solar charge controller (wellsee pv controller, battery controller, solar regulator) applies in solar photovoltaic systems, which coordinates the working of solar panels, batteries and loads. It adds some protection functions, so that the entire system can be in efficient and safe operation.
Ws-c series charge controllers apply to all types of photoelectric panels and various types of batteries, mcu (micro-processing controller) has pmw (pulse modulation wide-frequency) 0~100% variable duty cycle process. According to the types and actual charging situation of the battery, ws-c controller series can provide the fast and best charging voltage and electricity from the pv panel. C30 and c60 series are equipped with advanced man-machine interactive function, so the user can adjust the charging voltage.
Functions:
1. Applying with various types of batteries
2. Automatic recognition of input voltage
3. Micro processing controller pulse modulation wide-frequencypwmcharge
4. Temperature sensor for charging a battery in compensation
5. Overload protection (automatic comeback)
6. Overcharge protection
7. The temperature compensate
8. Short circuit protection (automatic comeback)
9. Thunder protection
10. Reverse discharge protection
11. Converse polarity connection protection (automatic comeback)
12. Low voltage protection

Model Ws-c2415 6a Ws-c2415 10a Ws-c2415 15a
Rated voltage 12v/24v automatic voltage recognition
Max load current 6a 10a 15a
Input current range 12v-17v/24v-34v
Lengthín1m
Charge loop drop 0.25v
Lengthín1m
Discharge loop drop 0.05v
Over voltage protection 17v/34v
Full charge cut 13.7v/27.4v
Low voltage cut 10.5~11v/21v~22v
Temperature compensation -3mv/ípc/cell
No load loss ín10ma
Max wire area 2.5mm2
Ambient temperature -25----+55 ípc


Ws-c2415

Certification ce rohs iso9001
Size 134*100*31 mm
Weight 500g

Solar controller

The solar controller provide the functions of over-charging protection and over-discharging protection to the battery, it also provide stable current to the loading.

The inverter can change dc into ac.

Suitable packing

Solar controller