Dac 600.1 Fvz

V6 Borewell Submersible Pumpset
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series
- 60 feet head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial
thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Additional intermediate bearing in higher stage pumps
- Fully SS pump set are available in SS - 304 Grade

Specification
- Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V,
50Hz AC Supply.
- Speed : 2900 RPM
- Head Range : 12 Mtr. To 600 Mtr.
- Discharge Range : 1080 LPM to 170 LPM
- Outlet Size in Inch : 2.0, 2.5 , & 3.0
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct
Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.)
6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles

Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series
- 60 feet head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Additional intermediate bearing in higher stage pumps
- Fully SS pump set are available in SS - 304 Grade

Specification
- Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V,
50Hz AC Supply.
- Speed : 2900 RPM
- Head Range : 12 Mtr. To 600 Mtr.
- Discharge Range : 1080 LPM to 170 LPM
- Outlet Size in Inch : 2.0, 2.5 , & 3.0
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct
Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

Product Details:
Product Type Other
Technology Other
Power Source Electricity
Operating Type Automatic
Power 420 Volt (v)
Pressure 6-7 Bar
Surface Treatment Other
Supply Ability : 7-10 Number Per Month

Price And Quantity:
Price Range 600000.00 - 800000.00 INR/Number
Minimum Order Quantity 1 Number

Product Specifications:
Product Type Other
Pressure 6-7 Bar
Technology Other
Usage/Applications Casting, Forging, Sheet Metal
Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions.
Weight (kg) 4.5-6.5 Metric Ton
Operating Type Automatic
Power 420 Volt (v)
Power Source Electricity
Surface Treatment Other
Color Dark Blue

Product Description
Hanger type shot blast machines designed and built as fully integrated blast cleaning systems to handle large/small or more fragile castings than barrel/table type machines. They provide a cost-effective solution for batch cleaning.

Hanger typeMachine consists of horizontal door with a rotating hanger type work/job handling system. This hanger is directly mounted on the door of the machine and itrotates on its own axis, drive unit of this hanger is provided outside the door. This hanger swings out as the door is opened, making the full area easily approachable for loading and unloading of the components. For loading the components, door of the machine is opened manually & components to be blasted are hanged one by one on to the door hanger and the door of the machineis closed.

Specification:

Number of Doors Single Door

Brand Adl Blastek

Power Required 14.5 HP

Capacity 10-15 ton/day

Voltage (V) 415 V

Driven Type Belt Driven Wheel

No. Of Blast Wheels 2

Wheel Size (inch) 12.5'' X 2.5''

Model Number BT-SPH-1

Load Carrying Capacity Of Hanger (kg) 300 Kg

Automatic Grade Automatic

Blast Wheel Power 5 HP

No. of Door with Hanger Hook 1

Diameter and Height Of Hanger Turning Meter 600 x 700 mm

Product Description
Waste Recycling Machine adopts a leading technology. It superfine new tearing machine for textile waste which are with porcupine roller with diameter 600 -1000 mm each cylinder with difference angle and specifications taper-pins. The feeding rail adopts elastic rubberised roller with diameter 150 - 250 mm. The working width from 1000-2000 mm and the maximum capacity up to 2500kg per hour.

Technical Specifications
Machine TMI 60.17.1.2000416a
Processing Capacity (kg/h): 160~180
Drum Diameter (mm): 250
Drum Weight (Kg/Drum): 420
Working Width (mm): 1000
Installed Power (Kg/h): 5.5*N
Outside Dimension (LxWxH) (mm): 10200x1800x1400

Machine TMI 60.17.1.2000416b
Processing Capacity (kg/h): 220 ~ 280
Drum Diameter (mm): 400
Drum Weight (Kg/Drum): 640
Working Width (mm): 1000
Installed Power (Kg/h): 7.5*N
Outside Dimension (LxWxH) (mm): 11600x1800x1400

Machine TMI 60.17.1.2000416c
Processing Capacity (kg/h): 300 - 350
Drum Diameter (mm): 600
Drum Weight (Kg/Drum): 600
Working Width (mm): 1000
Installed Power (Kg/h): 22+15*(N-1)
Outside Dimension (LxWxH) (mm): 14400x1800x1450

Machine TMI 60.17.1.2000416d
Processing Capacity (kg/h): 450 - 550
Drum Diameter (mm): 600
Drum Weight (Kg/Drum): 600
Working Width (mm): 1500
Installed Power (Kg/h): 30+18.5*(N-1)
Outside Dimension (LxWxH) (mm): 14400x2300x1450

Description of m10 expanding anchor bolt

Anchor Bolt high quality zp/zyp/DAC
Standard: per our drwing
Size: M6X40~M24x300 1/4X3/4" ~ 1"X12"
Thread: unc/unf, metric thread
Material: carbon steel, alloy steel, stainless steel
Finish: Plain, ZincPlated(Clear/Blue/Yellow/Black), black oxide, H.D.G, DAC,GOEMET
Packing: bulk in cartons (25kg Max.)+wood Pallet or according to customer special demand
Application: Structural Steel; Metal Buliding; Oil&Gas; Tower&Pole; Wind Energy
Test Equipments: Caliper,Go&No-go gauge,Tensile test machine,Hardness tester,Salt spraying tester, H.D.G thickness tester, 3D detector,Projector,Magnetic flaw detecter

Fin Neck Bolt

1)Standards: DIN & ANSI & JIS & IFI
2)Material: carbon steel, alloy steel, stainless steel
3)Size: M8-M20,3/8"--7/8"
4)Surface:Plain,Zinc ,HDG,DAC,Geomet
5)Thread:UNC, UNF, Metric Thread
6)Quality control :ISO 9001
7)Package :Small box ,Poly Bag,Carton+Pallet
8)Payment Term :TT ,LC Or Weston Union
9)Delivery: 30 days or depend on the qty

Fin Neck Bolt with cap:

1)Standards: DIN & ANSI & JIS & IFI
2)Material: carbon steel, alloy steel, stainless steel
3)Size: M8-M20,3/8"--7/8"
4)Surface:Plain,Zinc ,HDG,DAC,Geomet
5)Thread:UNC, UNF, Metric Thread
6)Quality control :ISO 9001
7)Package :Small box ,Poly Bag,Carton+Pallet
8)Payment Term :TT ,LC Or Weston Union
9)Delivery: 30 days or depend on the qty