China Weighted Blanket Glass Beads

1mm glass beads filling weighted blanket china glass beads
The glass beads,composed of Si,Na and Ca,are broken and calcined by high temperature after which the said microspheres are obtained.With properties of the high roundness rate,better hardness,excellent anti-friction and direct reflect light .They are widely applied in the fields of plastic rubber,abrasion ground,blast derusting,road-reflect dope and handicraft lamp,etc.

Size:1mm
SiO2: 65%min
Na2:14%max
CaO: 8%max

Packing: 25kg pp bag, 40bags into 1 jumbo bag

Glass beads for road marking paint for roads, parkings, airport run ways and a lot more

1,Road making,ã??airport road marking;
2,Fillers for various insulation and sound insulation products;
3,Enhance stress corrosion resistance. For example, aircraft engine turbo, vane, shaft, undercarriage, diversified springs and gears, etc
4,provide brightness for medical mechanical instruments and automobile parts
5,Be used for reflective safety clothing to improve safetyã??

Glass beads are made of broken glass, flat glass and other raw materials by high temperature melting bead processing. Low thermal conductivity, high strength, good chemical stability, and the texture of glass beads themselves, glass beads instead of plastic raw materials are widely used in filling, such as gravity blanket filling, compression filling, medical filling, weighted blanket filling, toy filling and so on.

Glass beads are made of broken glass, flat glass and other raw materials by high temperature melting bead processing. Low thermal conductivity, high strength, good chemical stability, and the texture of glass beads themselves, glass beads instead of plastic raw materials are widely used in filling, such as gravity blanket filling, compression filling, medical filling, weighted blanket filling, toy filling and so on.

Advantage of SICHENG Glass Beads
1. The chemical composition is inert silicon dioxide and there is no worry about the interference of chemical activity;
2, round elastic particles, impact resistance, can be recycled many times, less loss;
3, the spray wear is small, extend the service life of the nozzle;
4, the surface of the ball, will not damage the processing surface and precision size;
5. After treatment, the work-piece surface is smooth, with a special aesthetic feeling, improving the product value;

1) Product Introduction
With the advantages of smooth surface, even size, high hardness, wearable and stable, widely used as disperser, grinding media and filler materials in day, paint, ink and chemical industry. 
2) Product Specification 
Main products specification for grinding according to following table:

No. diameter(mm) corresponding sieve size
1 0.8-1.0 20-18
2 1.0-1.5 18-14
3 1.5-2.0 14-12
4 2.0-2.5 12-8
5 2.5-3.0 8-7
6 3.0-4.0 7-6
7 4.0-5.0 6-4
8 5.0-6.0 4-3
You can choose different size glass bead between 0.8mm-6mm according to different function. 
3)Technical references
A: Appearance: Clean and transparent, no visible bubbles and impurity.
B: Specific gravity:2.4-2.6g/cm3
C: Hardness:6-7
D: Compressive strength:1200N
4)Package
1.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is plastic woven bag to prevent leak or damp. The net weight of each bag is 25�±0.2kg.
2.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is plastic wiven bag to prevent leak or damp. The net weight of each is 1000±8kg.
3.According to clients' requirement.

The glass bead is transparant/clean/colorless/smooth , spherically shaped, free from milkiness, pits, or excessive air bubbles and conform to the following specific requirements.

Material of bead is clear and colorless, commercial grade soda lime glass cullet that has been cleaned to remove any opaque particulate and other matter that may interfere with the reflective properties of the bead.

We can produce all standard road marking glass beads.

+gb/t 24722-2009
+ksl2521
+jis3301
+aashto m247
+bs6088
+en1423/1424
+ttb1325
+as2006:2009
+brazil
+high brightness

China factory supply Abrasive glass beads media
Product Description
Glass beads are made of broken glass, flat glass and other raw materials by high temperature melting bead processing. Low thermal conductivity, high strength, good chemical stability, and the texture of glass beads themselves, glass beads instead of plastic raw materials are widely used in filling, such as gravity blanket filling, compression filling, medical filling, weighted blanket filling, toy filling and so on.

glassbeads5.png



Advantage
1. The chemical composition is inert silicon dioxide and there is no worry about the interference of chemical activity;

2, round elastic particles, impact resistance, can be recycled many times, less loss;

3, the spray wear is small, extend the service life of the nozzle;

4, the surface of the ball, will not damage the processing surface and precision size;

5. After treatment, the work-piece surface is smooth, with a special aesthetic feeling, improving the product value;

6. Suitable for dry and wet sand blasting;

7. The fine glass beads used for the metal micro-cracks can be easily displayed after the wet sandblasting;

8, for the processed work-piece with matte effect, highlighting the metal color, not rust and other advantages, no need to carry out pickling derusting treatment.


Application
1,Road making, airport road marking;

2,Fillers for various insulation and sound insulation products;

3,Enhance stress corrosion resistance. For example, aircraft engine turbo, vane, shaft, undercarriage, diversified springs and gears, etc

4,provide brightness for medical mechanical instruments and automobile parts

5,Be used for reflective safety clothing to improve safe