Single Stage Reciprocating Compressor

Application: Industrial purpose
Type : Reciprocating compressor
Make : Demag/ Dresser Rand/ Flowserve/ Elgi
Model : TS 15 LB
Free Air delivery : 44.1 CFM (1250 lpm)
Maximum Pressure : 175 PSI (12 Kgf/cm�²)
Piston displacement : 54.3 CFM (1535 lpm)
Motor Power : 11 KW (15 HP)
Air receiver: 500 Liters
Rotating speed: 1150 Rpm
Net Weight : 470 Kg

Ingersoll-Rand SSR-EP100 compressor
Model: SSR-EP100
Capacity: 445 CFM
Rated Operating Pressure: 125 PSIG
Max. Discharge Pressure: 128 PSIG
Max. Modulate Pressure: 135 PSIG
Nominal Drive Motor: 100 H.P.
Nominal Fan Motor: 3.0 H.P.
Total Package Amps: 255/148 A
Voltage: 220/440 V
Phase/Frequency: 3 Phase / 60 Hz
Control Voltage: 120 V
Serial Number: F17849036424
Contactor Amp Rating: 150 A
Assembly Amp Rating: 350 A
Locked Rotor Amp Rating of Assembly: 1500 A
Manufactured by: Ingersoll-Rand, Rotary-Reciprocating Compressor Division, Davidson, North Carolina, USA.

NC95T
No. of cylinders :- 2
SCFM:- 50
Max Pressure:- 12.5 KG/175PSI
Air Receiver :- 500 Ltrs.
Motor Capacity:- 10HP/12.5HP

Item - Brand
Belt - Fenner make or equivalent
Filter - KLN or Fleetguard
Pressure Control Switch - Alfa
Starter - L&T
Bearing - SKF
Piston & Rings - IPL
Pressure Gauge - KEI or Baumer

AIR COMPRESSOR

labh air compressors has manufacture best quality of reciprocating air compressors. our company known for quality air cmpressors in market. we have wide range of two stage reciprocating air compressor. as per the req of client we are involved in providing the machine.

It is uses in different types industrial sectors like food processing,packaging, manufacturing, automobile, chemical, electrical etc.

machine specification:
Specification/Additional Details
Motor Power: 3 HP
Compressor Technology: Reciprocating Compressor
Power Source: AC Three Phase
Maximum Flow Rate: 60 cfm
Discharge Pressure: 12 bar
Air Tank Capacity: 175 ltrs
Air Quality standard: class-1
frequency: 50hz
no of cylinders: 2
voltage: 230v
Brand: Labh Air Compressor

MORE STABLE:

GEARLESS:
IPM motor and air end are connected with one-shaft. Without gear: no gear pitting, no broken-teeth.

SOFT-START:
Less damage to electrical equipment

SPECIALLY DESIGN OF SEALED :
100% to prevent oil leakage. Without leak troubles.

LONG LIFE :
The high-performance permanent magnet materials.

The specialized corona-resistance enameled wire is applied to stator coil.

COMPARED WITH THE GEARED TWO-STAGE AIR END :


Oil is effecting on the gear all time. Underling the long-term running in variable speed, the gear will have pit-ting, even teeth broken.

SPECIALLY DESGIN OF BOX:
Independent air cooling.

Dont need to rely on the compressor cooling system.

WITHOUT COUPLING:
Two independent IPM motors directly drive two stage air end.

One-shaft structure, without coupling danger.



MORE SAVING:

SLPM is driven by two independent IPM motors, intelligent control. During operation, by control-ling the pressure between the two stage. The optimal rotating speed of two air outlet are automatically calculated to attain the optimal efficiency with optimal compression radio of matching and balance, allowing compressor always under optimal operation condition.



SPLM FOCUS ON THE TOP EFFICIENCY DURING PRACTICAL USE THE RANGE OF FREQUENCY CONVERSION UP TO 30% TO 100%

Double permanent Magnetic Motors, Continuously Variable Speed
Transmission efficiency 100%
Without transmission efficiency loss from gear
Without transmission efficiency loss from coupling
Interstage pressure can be adjusted and constant pressure achieved
The host is always at the most energy-efficient speed


MORE EFFICIENCY:

SLPM is with motor, excellent performance.

Under low frequency, low speed, it can still keep high efficiency.

Compared with geared two-stage, TRANSMISSION EFFICIENCY ONLY REACHED 97%



One shaft structure, gearless , without coupling. 100% TRANSMISSION EFFICIENCY.



MORE COMFPRTABLE:

No Motor Bearing Noise
No Gearbox Noise
No Coupling Noise


MORE COMPACT:

Smaller motor size, one shaft structure can save more space.



Motor IPM (Internal permanent Magnet) Motor IP54

The Campbell Hausfeld Shop Air Series compressor is ideal for general compressed air needs, including machine shops, dry cleaners, automotive repair facilities, woodworking shops, or general industrial applications. Features cast iron, 2-stage pump for long life, ASME-certified tank (200 max. PSI) and industrial-duty NEMA motor for reliable service. Mounted and wired motor starter offers fast electrical hookup. Fully enclosed metal belt guard assures safe operation. U.S.A.

Wheel Mounted Compressor
Base Mounted Compressor
Compressor with Non-Standard Tanks
CFM : 6 CFM
Hp : 1.5hp
Pressure: 8
Power KW: 1.2
RPM: 950
Tank Capcity: 135