Marine Machinery And Spares Suppliers

Mooring Buoy
A Mooring Buoy system consists of multiple steel buoys. The exact configuration depends on water depth, field requirements and environmental conditions. Typically it is a pattern of four to eight mooring points used to moor tankers. Each point consists of a rigid buoy moored to the seabed by a chain and an anchor. The prime purpose of each buoy is to act as an anchoring point for the tanker to berth. The buoys are moored to the seabed, therefore, the tanker berths without use of its own anchors.


Each buoy has a chain hawser assembly through the center of the buoy unit, terminating in a chain stopper on deck. The buoys are normally fitted with double quick release hooks to disconnect quickly from the tanker. Hawsers are connected to the bow or stern of the tanker on one end and to the quick release hook of the buoy on the other end.


After mooring to the buoys, the tanker may start (off)loading by connecting a subsea hose string to the ships manifold. The other end of the hose string connects to the Pipe Line End Manifold (PLEM), fixed to the seabed or any other pipeline transferring the product to or from any installation located onshore or offshore. Should the tanker leave the berth, the hose string will be laid down on the seabed, to be picked up again when the next tanker arrives.


Anchor arrangement - An anchor arrangement is deployed to connect the buoy to the seabed. For each buoy, dynamic behavior calculations predict the behavior of the buoy for various wind, wave and current conditions. These calculations determine the optimum anchor leg arrangement, and the size of the various anchor leg components.

Type: 24MM 1M
Material: polyethylene
Two horses with V eyes, shackles,
Safety negative Heda 30 tons / roots,
Conform MSC1327 rules
CCS certificate provided

Model No.:ZB1701-4
Speficication of air vent cover
The surface is polished . Good material and excellent polishing quality make it has good performance on anti-rust and corrosion
resistance .

This air vent cover is produced in stainless steel material , which is solid and durable

2 sizes are available for you 4 inch and 5 inch.



Stainless steel 316 5' inch marine round louvered vent for boat yacht
5 Round Louvered Air Vent
Easy to use and install.
316 stainless steel, corrosion resistance and durable.
Great for related vents in boats, marine, yacht, caravan, home

ZB1602-4
Name Stainless Steel wire eye strap
Material stainless steel 316
Suface finish high polishing
MOQ 1 PC
Technqiue investment casting
Packing bubble bag+ carton
Speficication of Stainless Steel wire eye strap

Stainless Steel wire eye strap made of stainless steel 316 ,It's durable and strong materal for tough saltwater environment.
This Stainless Steel wire eye strap is casted in stainless steel 316 material by investment casting, which is solid and durable.
5 size available ,

a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon.


Most of them can be supplied from stock. Low MOQ is acceptable.
Contact us now for more details

ZB1406-22 7/8 inch
Name Bimini Top Jaw Slide with bolt
Material stainless steel 316
Suface finish high polishing
MOQ 1 PC
Technqiue investment casting
Packing bubble bag+ carton
Speficication of SS Bimini Top Jaw Slide with bolt


This Jaw Slide is casted in stainless steel 316 material by investment casting, which is solid and durable

The surface is polished . Good material and excellent polishing quality make it has good performance on anti-rust and corrosion resistance .

The screw here make the connection with pipe tightly.
Two sizes available , which can fit tube 7/8 in or 1 inch.

is a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon.

Most of them can be supplied from stock. Low MOQ is acceptable.
Contact us now for more details

Model No.:ZB1402-22 7/8 inch
Name Eye End Cap
Material Black nylon
MOQ 1 PC
Size 22/25mm
Packing opp bag+ carton
Speficication of Eye End Cap


Bimini top fittings cover cap eye end made of black nylon,It's durable and strong materals for tough saltwater environment.
Nylon eye end is very lightweight,solid,strong,Great accessories for kayak,canoe,marine boat,fishing dinghy,raft and so on.

Bimini fittings top cover cap eye end fits for 7/8 1 OD round tube,fits most standard bimini tops.
is a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon.

Most of them can be supplied from stock. Low MOQ is acceptable.

Model No.: ZB1204-19

Name

stainless steel fishing rod holder

Material stainless steel

Suface finish high polishing

MOQ 1 PC

Technqiue machining + casting + polishing

Packing bubble bag+ carton

Speficication of SS fishing rod holder


This fishing rod holder is made in stainless steel 316 material by investment casting, which is solid and durable

The surface is polished . Good material and excellent polishing quality make it has good performance on anti-rust and corrosion resistance .

This bolt can fix the fishing rod holder tightly

is well packed in a box (115x60x245mm )

pass our inspection before shipping to you to make sure you received each single pc is in good condition.

a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon.


Most of them can be supplied from stock. Low MOQ is acceptable.

Color: Orange,yellow, or customized colors like red, blue, green, black, etc.
Material: PE shell with PU foam inside, galvanized or stainless steel fasteners.
Cusomized Design: Available.

Dredging pipefloat are made from high wear resistance PE by rotational molding technology. One complete dredging pipefloat consists of two halves filled with PU foam which are connected by galvanized bolts, nuts and washers. The reasonable structure makes the dredging pipefloat perform well in tough dredging condition.

Mooring buoys are also known as mooring drums. They float on the water surface and connect the anchor or sinker with chains. They are mainly used for ship mooring, ship stand-by, ship typhoon shelter and Mooring degaussing. The are also used a lot in offshore area. The mooring method is divided into single point mooring and multi-point mooring. There are also mooring buoy type anti-collision facilities for petrochemical terminals.

TUF Marine could produce mooring buoys with diameter up to 10 meters with good buoyancy and is able to perform x-ray non-destructive detection for welding spots. We could produce mooring buoys and navigation buoys in accordance with customers drawings and specifications.

Materials: Marine grade material like closed-cell polyurethane, Polyurea Elastomer, PE High Elastic Foam, PVC, Steel and etc.
Finish: Sandblasted , Marine grade primer and Marine grade epoxy coating.

We can arrange third party inspection like IACS members : DNV-GL, ABS, CCS, BV, NK,LR and etc.