Smoke Detector Fire Detector

Smoke & co detectorHeat detector
ntc thermal sensor
tamper resistant pins for battery4 digits temperature led display
shockproof design, suitable for vehicle usecan set maximum or minimum alarm temperature simultaneously
test and hush button, auto resetreal ambient temperature correctable
on-top battery compartment, easy for battery replacementauto reset /power off reset optional



Execute criterion: en54-4, ul539, en14604, ul217

dustproof, mothproof and anti-white light
ElectrovalveManipulator
gas species: natural gas, lpg, man-made coal gas and other noncorrosive gaspower supply: 8vdc-16vdc 12vdc-26vdc
valve body material: brass alloyoperation press: 1.6mpa
material for sealing: nbr rubbervalve specification: 4 fen (1fen=1/3centimeter), 6fen, 1 inch, 1.25 inch, 1.5 inch
test operating pressure: 25kpa
torque: 10kg.Cm~30kg.Cm~40kg.Cm~50kg.Cm11069.540mm

Anti-electromagnetic interference, no-spark design

Alarm bellBreak glass manual call point
size: 2", 3", 4", 6", 8", 9", 10", 12"rated voltage :12vdc or 24vdc / 220vac optional
volume: over 105db/mconsumption: 10w
working voltage : 12vdc/24vdc

With waterproof cover manual call pointSiren with strobe

SNC-300 non-addressable photoelectric smoke detectors are state-of-the-art detectors suitable for connection to

2-wire or 4-wire non-addressable fire detection control and indicating equipment, or to addressable fire detection

Control and indicating equipment that can accept non-addressable type detectors.

Advanced electronics in conjunction with a photoelectric smoke sensing chamber provide early detection of fire

And high immunity against unwanted alarms.

Photoelectric smoke sensor
Analogue detection discrimination
Dual leds for 360° visibility
2-wire and 4-wire models for dc 12 v and dc 24 v operation
4-wire model for dc 48 v operation
4-wire models available with a n/o alarm relay output
4-wire models available with auto-reset
2-wire models available with remote led output
Connects to zone monitor for use with addressable control and indicating equipment

Snc-300 non-addressable photoelectric smoke/heat detectors are state-of-the-art detectors suitable for connection
To 2-wire or 4-wire non-addressable fire detection control and indicating equipment, or to addressable fire detection
Control and indicating equipment that can accept non-addressable type detectors.
Advanced electronics in conjunction with a photoelectric smoke sensing chamber and an electronic thermistor
Provide early detection of fire and high immunity against unwanted alarms. The heat sensor provides sensitive
Rate-of-rise operation or fixed-temperature operation when the response threshold value is exceeded.
Photoelectric smoke and heat sensors
Analogue detection discrimination
Dual leds for 360° visibility
2-wire and 4-wire models for dc 12 v and dc 24 v operation
4-wire model for dc 48 v operation
4-wire models available with a n/o alarm relay output
4-wire models available with auto-reset
2-wire models available with remote led output
Connects to zone monitor for use with addressable control and indicating equipment

SNA-360 analogue addressable photoelectric smoke/heat detectors are microprocessor controlled state-of-the-art

Detectors compatible with popular control and indicating equipment loop protocols.

Advanced electronics in conjunction with a photoelectric smoke sensing chamber and an electronic thermistor provide

Early detection of fire and high immunity against unwanted alarms. The heat sensor provides sensitive rate-of-rise

Operation or fixed-temperature operation when the response threshold value is exceeded.

Photoelectric smoke and heat sensors
Analogue detection discrimination
Dual leds for 360° visibility
Dc 24 v operation
2-wire connection to many popular loop protocols
Dip switch address setting
125 usable detector address settings per loop
Optional remote led output

Product Type:CVC-Y01
wireless smoke detector
Home security smoke detector
Fire protection smoke detector
Fire alarm system wireless smoke detector features:
It is also known as Wi-ion type smoke alarms for all types of early fire warning issued by the smoke in a timely manner. When one of the following circumstances, smoke alarm indicator on probe (red) flashing, the host site no matter what state the alarm will alarm, and automatically dial the preset telephone alarm:
1) against space and duration of the smoke concentration reaches the alarm value;
2) Press the test button on the smoke sensor.

Fire alarm system wireless smoke detector specification:
1.the monitoring area: 20 square meters
2.Power consumption: monitoring state <20uA, alarm status <10mA
3.LED indicator: Monitor status LED flashes once every 40 seconds, the alarm status LED flashes once every 1 second
4. the alarm output: wireless transmitter output, LED flash once every 1 second
5.the use of environmental conditions: indoor, ambient temperature -10 ~ 45 C, relative humidity 95%
6.Battery: 9V
7.automatic detection: self-test once every 1.67 seconds
8.weight (without batteries): 100g
9.Dimensions: Diameter 110mm, height 35mm.

Smoke detector packed in carton Size: 500mm*500mm*450mm.

Enerna IoTech WiFi Smart IoT Wireless Smoke Fire Alarm Detector Smoke Detector. Wireless smart photoelectric smoke sensor, with Ultra-low-power MCU design. It is capable of real-time detecting the Presence of smoke. Once detect danger of fire smoke, red LED will be ON, and alarming to alert you and your family timely.

Enerna IoTech WiFi Smart IoT Wireless Smoke Fire Alarm Detector. the whole solution is just smoke detector alarm to app Platform directly, can be real-time monitoring remotely. this solution Can save much cost from main alarm panels, and it also can be linkage to Other smart device to work together. It will be easy to match different Project applications, such as building office, warehouse, supermarket, Factory, restaurant, hotel

Enerna IoTech WiFi Smart IoT Wireless Smoke Fire Alarm Detector is a smart Photoelectric smoke sensor, with ultra-low-power MCU design. It is Capable of real-time detecting the presence of smoke. Once detect danger of fire smoke, red LED will be ON, and alarming to alert you and your family timely. It can be widely used in household, lounge, Coffee house, dancing hall, and any other places need fire alarm Monitoring.

this Enerna IoTech WiFi Smart IoT Wireless Smoke Fire Alarm Detector can work Standalone. When detects smoke, alarm will sound and send push message for alert. Meanwhile, it can link with other smart products on Tuya Platform. Keep your house safe.

Enerna IoTech WiFi Smart IoT Wireless Smoke Fire Alarm Detector Function:
1. APP remote control
2. Link with TUYA smart home products together
3. Maze technology and small size
4. 80dB sound alarm alert
5. Ultra low power

Skype: iotech(at)foxmail.com
Whatsapp: 0086-137-2827-9456
Wechat: 13728279456
Web: Enerna-IoTech.com

Package:
1x Enerna IoTech WiFi Smart IoT Wireless Smoke Fire Alarm Detector
1x User Manual

"Power supply: DC 2 * 1.5 AA
Quiescent current: