Mask Raw Materials

High-quality mask raw materials

Raw materials list: polypropylene nonwovens, meltblown filter cloth, nose clip bar, and earrings

Spunbond nonwoven prevents droplets, body fluids, etc. from entering the mouth and nose directly. The inner layer raw material of spunbond nonwoven absorbs moisture and is at the same time the last barrier between the virus and the respiratory tract.


The meltblown nonwoven in the middle has an ultra-fine fiber structure that prevents viruses, which are even finer particles, from entering. In addition to the mechanical filtration of particles, the fibers can also adsorb even smaller particles through molecular gravity and electrostatic effects.

KN95 Face Mask Material: 5-Layers

1).50g SSS Rating non-woven

2).99% Melt-Blown Filter

3).98% Melt-Blown Filter

4).25g SSS Rating non-woven

5).25g SSS Rating non-woven

SS Non-woven cloth
block relatively large particulate


Medical standard melt-blown fabric
filter both oily and non-oily substances while breathing freely

ss-non-woven cloth
comfortable, skin-friendly

Product Procter & Gamble Indonesia.

Available in Sachet, Bottle, and Refill Pack.
Variants: Passion, Sunrise, Anti Bacteria, Anti Odor, Garden Bloom, Mystique, Fusion, Romance, Daring, Sweetheart, Floral, Sports, Aqua Ocean, Secret Garden.

Origin: Vietnam
Color: White
Type: Dried
Size: 3-3.5 cm
Packing: 20kg/pp
MOQ: 20 kgs
2 tons in 20ft

Hoi An Lantern was made from 100% silk fabric stretched over a bamboo frame with a tassel below. These lanterns are inspired by Vietnamese artisans and is meant to bring good fortune. These Vietnamese silk lanterns are handmade using silk and brocaded fabric. When send, they will be folded as a narrow tube, then expands like an umbrella in less than a minute .

About Meltblown Nonwoven

Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:

The main desired characteristics expected for melt blown nonwoven fabrics are:

Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties


Application of spun-bond nonwoven fabrics:

Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc