Autoclave Aerated Concrete is a Lightweight, Load-bearing, High-insulating, Durable building product, which is produced in a wide range of sizes and strengths. AAC Blocks is lightweight and compare to the red bricks AAC blocks are three times lighter.
Fusion Plastering Mortar is a plastering adhesive for most of all wall substrates such as AAC Blocks, CLC Blocks and cement bricks which gives good bonding.
Properties
Fusion Plastering Mortar is formulated cementitious grout, which is non-shrink and free-flowing, making it ideal for AAC Blocks.
Base: Cement with polymer additives
Pot Life : Approximately 90 minutes @ 30oC
Water Demand: 18-20%
Compressive Strength (Mpa):> 4 in 28 days
Bulk density:1.2 to 1.4 kg/lit
Coverage:0.16 - 0.22 kg/sft/mm
Thickness of layer:6 - 12 mm
Supplier: Dry-mixed mortar equipment, dry-mixed mortar production line, block making machine, clay brick making machine, cement and concrete mixing station
H-tec dry-mixed mortar tower type production line can produce the below product¦ 1adhesive mortar¦such as ceramic tile adhesive, filler, heat preservation multiplexed system use adhesive mortar, etc. 2rendering mortar¦such as internal and external rendering mortar, lacquer putty, colored decoration mortar, heat preservation mortar, etc. 3masonry mortar ¦such as normal masonry mortar, concrete masonry mortar, heat preservation, masonrymortar, etc. 4floorscreed mortar ¦such as normal floorscreed mortar, self-leveling mortar, etc. 5special mortar ¦such as mending mortar, waterproof mortar, floor hardener, etc.
scription of mortar production line:
I. This line has simple structure ,flexible production process and low cost.Equipments on this line are easily repaired and replaced.
II. The raw materials for mortar are mainly sand,cement,flyash and limestone.They are very cheap, thus,give more additive value to mortar.Over all,this line is of high profit and is the best choice for investors.
Models of mortar production line:
Type Model Mixer/KW Capacity T/Need area/m*m
FRQ:
1.How many kinds of mortar can this line produce?
A: There are more than 16 kinds of mortar and this line can produce about five of them. If you want to produce even more,we can also offer.
2.How many person needed in this line?
A: 3-5 workers will be enough to operate this line.
3.Is the line full-automatic?
A: Yes,we can custom as your need.
4.Whats the difference between full-automatic line and semi-automatic line?
A:(1)Sem-automatic line need manual help to upload materials,while full-automatic line need not.
(2)semi-automatic line may not need material silos,full-automatic line need.
(3)Semi-automatic line is relatively cheaper than full-automatic line.
5. Is it including packing machine?
A: Yes.
6. How many types of mortar production line is there? What¡¯s the difference?
A:(1)Normally,three. Vertical type ,block type and workshop type.
(2)Normally: vertical type:the height of this line is big more investment of steel supporting structure
Block type: more factory area less steel supporting structure
Workshop type: install in a workshop and the height should be low
7.What is factory area needed?.
A: It depends on the line type. 20-200m*m will be enough
8.Is it only dry or can make wet also?
A:This line is most suitable for dry mortar and can mix wet mortar with 16% moisture.
9.What¡¯s the total power consumption (KW)?
A:It is about 50KW. It is widely depends on the capacity and number of raw materials.
10 What¡¯t the capacity of the line?
A:2-50ton per hour.
11.What¡¯s the guarantee period?
A:12 months. With in this 12 months we take care of all the problems occurred, after that we offer repair and maintain service.
12.Can you install in my country?
A:Yes, we offer oversea installation service.
13:Can you teach us how to operate this line?
A:Yes.We offer training service free of charge.
14:What¡¯s the delivery date?
A:30 days.
15: Whats the payment term?
A:TT and L/C.
16.Can you delivery to my port?
A:Yes,no problem.
17:How can I inspect the line before shipment?
A:You can inspect by yourself or you fine someone inspect for you.
Materials for mortar:
1.Cementing material: cement, lime, plaster.
2.Aggregate: yellow sand, quartz sand, limestone, dolomite, expanded perlite.
3.Mineral admixture: industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder etc.
4.Water-retention and thickening material.
5.Chemical additives.
Production process:
1.Raw material storage
2.Raw material convey and weigh
3.Addition and weighing of additive
4.materials mixing
5.finished mortar storage and packing
6.Other device: dust collection system+air compressor system+PLC electric controlling system+steel supporting system
Introduction
NF Group is a special group for products design,manufacture and sales.
NF Group are the manufacturer and trade body.
NF Group mainly embark on Building Material Projects.
The Machine include Clay Brick Making Machine,Concrete Block Making Machine,Stone Cutting&Polishing Machin , Cement Tile Pressing Machine , Dry Mortar Mixing Machine ,Concrete Mixing Station,Stabilized Soil Mixing Equipment.
NF Group would like to offer you the competitive price and better quanlity.
NF Group will offer the advanced,favorable equipment to the clients.
NF Group would like to develop hand in hand, enjoy cooperation on mutual
benefit and create prosperiy
together.
Other trade Item:
Shoes:
Casual shoes, Sport shoes, Baby shoes, Child shoes, Running shoes, Fashion shoes, skateboarding shoes and Wheel shoes etc.
Stone:
Mable/ Granite slab
Introduction
NF Group is a special group for products design,manufacture and sales.
NF Group are the manufacturer and trade body.
NF Group mainly embark on Building Material Projects.
The Machine include Clay Brick Making Machine,Concrete Block Making Machine,Stone Cutting&Polishing Machin , Cement Tile Pressing Machine , Dry Mortar Mixing Machine ,Concrete Mixing Station,Stabilized Soil Mixing Equipment.
NF Group would like to offer you the competitive price and better quanlity.
NF Group will offer the advanced,favorable equipment to the clients.
NF Group would like to develop hand in hand, enjoy cooperation on mutual
benefit and create prosperiy
together.
Other trade Item:
Shoes:
Casual shoes, Sport shoes, Baby shoes, Child shoes, Running shoes, Fashion shoes, skateboarding shoes and Wheel shoes etc.
Stone:
Mable/ Granite slab
Drilling Rigs:
We supply a full line of drilling rig packages: skid-mounted drilling rigs, truck-mounted drilling rigs and trailer-mounted drilling rigs. Our skid-mounted drilling rigs include diesel electric AC/VFD or DC/SCR drive rigs, mechanical drive rigs, and combination drive rigs, from 1, 000 HP to 6, 000 HP. Our truck-mounted drilling rigs range from 450 HP to 1, 000 HP.
Workover Rigs:
Our product line includes onshore workover rigs, which range from 150 HP to 1, 000 HP. The service depth of our workover rigs usually equipped with Caterpillar diesel engines and Allison transmissions is from 8, 000 ft to 30, 000 ft.
Drilling Equipment:
We sell a full line of API certified drilling rig components including masts, substructures, drawworks, crown blocks, traveling blocks, hooks, hook blocks, swivels, rotary tables, and top drives. The rated load of our AC/VFD drive top drives is from 190 tons to 1, 000 tons.
We have very strong advantage to supply the projects as follow:
i) Rental and sale of drilling/workover rig
ii) Rental and sale of BOP
iii) Sale of part of drilling rig including mast, substructure, drawworks, rotary table, mud pump and accessories
iv) Casing and tubing running service
v) Directional Drilling service
vi) Rental, sale and maintenance of drilling jar
vii) Inspection service
viii) Drilling service
ix) Wireline logging
Specially, we are a project management company hence we can work as a subcontractor to join project or partner with clients in all relevant project if clients need.
