Automatic Blowing Molding Machine

2 cavity semi auto blow molding machine

To make PET bottles from 200ml to 2000ml

It makes around 750pcs per hour based on 500ml PET water bottles

1 cavity semi-autoamtic blow molding machine

To make PET bottles from 200ml to 5 liter. Max 5 liter.

It makes around 300pcs per hour based on 5 liter bottles

CM-A4 Full automatic blow molding machine is suitable for producing PET/PE and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. The maximize volume of molded product and the maximize product capacity can reach respectively 2000ml and 4000pcs/h.

1. Reasonable design, full automatic control, save power and labor. Adopt high quality components.
2. Feeding system carries the preforms by robot automatically.
3. Infrared oven heater adopts the quartz lamp to heat the PET tube.
4. Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble -shooting, maintenance and other benefits.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,

beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.

-

Key Specifications/Special Features:
* Material: PET PP PE
* Pneumatic part:
o Valve SMC
o Cylinder SMC
* Electric part:
o PLC LG/Mitsubishi
o Operation system LG/Hitech
o Relay OMRON
o Infrared thermometer
o America raytek
* Electrical components adopts CE, UL, CCC approved international advanced high-tech product
* Output Depend on bottle design: 3,200 to 4,000 pieces/h
* Body diameter: 20 to 100mm
* Height: 50 to 350mm
* Neck diameter: 15 to 38mm
* Mould cavity four cavity
* Mould thickness: 240mm
* Mould 500 x 500mm
* Electrical source power 380/220V 3Phase 50/60Hz
* Power: 49kW
* Really use power 14kW
* Air source:
o LP air compressor 1.6m3/min 1.0MPa, one set (7.5kW)
o HP air compressor 1.0m3/min 3.0Mpa two set (each set 11kW)
o Air dryer 2.0m3/min 3.0MPa 1set
o Cooling water :Cooling water 15L/min
o Size (L x W x H): 1,908 x 1,858 x 1,920mm
o Weight: 3,600kg
o Auxiliary equipment
* Pre-form unscrambler is equipped:
o Size (L x W x H): 276 x 106 x 186mm
o Weight: 250kg
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,

beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.

CM-A2 Full automatic blow molding machine is suitable for producing PET/PE and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. The maximize volume of molded product and the maximize product capacity can reach respectively 2000ml and 2000pcs/h.

1. Reasonable design, full automatic control, save power and labor. Adopt high quality Components.
2. Feeding system carries the preforms by robot automatically.
3. Infrared oven heater adopts the quartz lamp to heat the PET tube.
4. Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble -shooting, maintenance and other benefits.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,

beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.

-

Key Specifications/Special Features:
* Material: PET, PP, PE
* Pneumatic part:
o Valve SMC
o Cylinder SMC
* Electric part:
o PLC LG/Mitsubishi
o Operation system LG/Hitech
o Relay OMRON
o Infrared thermometer
o America raytek
* Electrical components adopts CE, UL, CCC approved international advanced high-tech product
* Output depend on bottle design: 1,800 to 2,000
* Body diameter: 20 to 100mm
* Height: 50 to 350mm
* Neck diameter: 15 to 38mm
* Mold cavity to cavity
* Mold thickness: 240mm
* Mold 500 x 500mm
* Electrical source power 380/220V 3 Phase 50/60Hz
* Power: 25kW
* Really use power: 6kW
* Air source:
o LP air compressor 1.0m3 1.0MPa 1 set (7.5kW)
o HP air compressor 0.73 3.0MPa 2 set (each set 11kW)
o Air dryer 1.03 3.0MPa 1 set
o Cooling water: cooling water 10L
o Size (L x W x H): 1,908 x 1,280 x 1,920mm
o Weight: 2,000kg
o Auxiliary equipment
o Pre-form unscrambler is equipped:
* Size (L x W x H): 276 x 106 x 186mm
* Weight: 250kg
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,

beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.

Sixze:2*1.1*2.2 m
Weight:250kg
Theoretical output:1200bph

Sixze:2*1.1*2.2 m
Weight:250kg
Theoretical output:1200bph

SP22-V stretch blow molding machine is specially designed to produce 5-gallon bottle and 25L wide mouth jar. Its output is up to 90 BPH for 5-gallon bottle and even could reach 120 bottles per hour in certain case.

SP22-V consists of main unit and rotary infrared heater. The ordinary quartz lamp cannot heat preform ideally because the preform wall is excessively thick. The infrared heater with high penetrative force can heat the inside and outside of preform simultaneously and keep preform in even heating, therefore high shaping quality.

What an operator should do during production is just to put heated preform into the blow mold and press the switch, and then computer will take care of the whole procedure.

Semi automatic stretch blow molding machine APF - 5 to produce PET bottles.

Output - for bottle volume 0,2- 3,0 l, bottles/h - 600-800

for bottle volume 5,0 - 6,0 l, bottles/h - 300-350

Bottle volume - 0.2 - 6.0 L

Automatic stretch blow molding machine APF - 10 to produce PET bottles.

Output - 2500 bph.

Bottle volume - 3.0 - 10.0 L

Automatic stretch blow molding machine apf - 5 to produce pet bottles.

Output - 1600 bph

Bottle volume - 3.0 - 10.0 l.