Note: For 1 x 20' FCL total towels are shipped 7200 pieces bath towel, 4000 pieces Bath Mat, 9000 Pieces hand towel and 55000 pieces Face Washer. All are white and total weight for 1 x 20 FCL is 9.28 Ton (excluding the container weight)
6150G is a non-flat washer with a conical shape which gives them their
specific spring characteristic. They are designed to be loaded in the axial
direction only and are typically used to apply a preload to a bolted joint
and to provide resiliency and flexibility under vibration conditions.
6150G is applicable for Brakes, Bearing pre-load, Overload device,
Mechanical actuator, Industrial furnace, Mould, Clutch in Metallurgy,
Mechanical vehicle, Electricity, Construction industry.
1075G Washers
1075G washers are Disc Springs with a Trapezoidal Cross Section on both
sides for gripping.
1075G washers are ready to fit washers for sustaining a preload and
avoiding loosening. As the bolts are tightened the serrations bite into the
mating faces and preventing the bolt from loosening due to vibration.
Also the disc shape holds the necessary pre-load.
The diameters for 1075G Washers are matched to bolt dimensions. The outer diameter of the washer is
matched to the head diameter of the screw. This allows the use of screws and bolts including recessed heads,
except countersunk screws.
All products listed manufactured to AIGI ENVIRONMENTAL INC. standard materials and finishes, please consult with
AIGI ENVIRONMENTAL INC. on any special materials and or finishes.
The advanced Nickel Plated Technology gives AIGI NIF Disc Springs a high wear and corrosion
resistant surface.
The special coating protects the spring metal surfaces from scratching and provides protection
from acidic and alkaline corrosion during working application. The highly protected surface can
even withstand prolonged exposure to halogens.
This tremendous corrosion resistance dramatically extends the disc spring life and greatly
enhances its preload ability.
Remarks: NIF H-13 disc spring is compatible with bolts at 8.8grade / 80D / SAE8.
Conventional H-13 disc springs are available too.
Please consult with AIGI Environmental Inc. for all your standard and non-standard requiremnts.
Nascent Pipe & Tubes is one of the well-established whole seller and trader of quality Nickel Alloy 201 Fasteners (Washers), which is available in different sizes and shapes for our customers. Most nickel â?? containing products such as Nickel 201 Flat Washers have long useful lives, where average life is probably 25 years â?? 35 years, with many applications lasting much longer.
Nickel 201 Lock Washers is silvery white and takes on a high polish, where it also further gives glass a greenish colour. Nickel 201 Sealing Washer is hard, malleable, ductile, somewhat ferromagnetic, and a fair conductor of heat and electricity. Nickel 201 Split Washers belongs to the iron cobalt group of metals and is chiefly valuable for the alloys it forms.
Nascent Pipe & Tubes is one of the well-established whole seller and trader of quality Nickel Alloy 201 Fasteners (Washers), which is available in different sizes and shapes for our customers. Most nickel containing products such as Nickel 201 Flat Washers have long useful lives, where average life is probably 25 years â?? 35 years, with many applications lasting much longer.
Nickel 201 Lock Washers is silvery white and takes on a high polish, where it also further gives glass a greenish colour. Nickel 201 Sealing Washer is hard, malleable, ductile, somewhat ferromagnetic, and a fair conductor of heat and electricity. Nickel 201 Split Washers belongs to the iron â?? cobalt group of metals and is chiefly valuable for the alloys it forms.
Nascent Pipe & Tubes is one of the well-established whole seller and trader of quality Nickel Alloy 201 Fasteners (Washers), which is available in different sizes and shapes for our customers. Most nickel containing products such as Nickel 201 Flat Washers have long useful lives, where average life is probably 25 years 35 years, with many applications lasting much longer.
Nickel 201 Lock Washers is silvery white and takes on a high polish, where it also further gives glass a greenish colour. Nickel 201 Sealing Washer is hard, malleable, ductile, somewhat ferromagnetic, and a fair conductor of heat and electricity. Nickel 201 Split Washers belongs to the iron cobalt group of metals and is chiefly valuable for the alloys it forms.
Product Details:
Usage/Application Industrial
Type Lap Joint Flanges
Size 1-5 inch, 0-1 inch, 20-30 inch, 5-10 inch, 10-20 inch
Material Standard ASTM A182, ANSI B16.5, ASTM A351, ASTM A105
Rated Pressure (Bar) 2500
I Deal In New Only
Material Stainless Steel
Country of Origin Made in India
We can offer vide range of Lap Joint Flanges from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. Various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Fittings, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc.
Specifications: Can offer Lap Joint Flanges as cast, forged, normalized, annealed, quenched (hardened) tempered condition with black or bright (proof machined) finish.
Various type of IBR approved Flanges that can be procured are as follows: Blind, Slp-On, Welding Neck (Weldneck), Long Welding Neck (LWN), Socket Weld, Lap Joint, Threaded, Spectacle Blind, Plate, Collar, Flat Face, Raised Face, Ring Type Joint, etc.
Size range of flanges that can be offered are �½â?? inch upto 60â?? inch depending on type, class grade of flanges.
Class of flanges: #150, #300, #400, #600, #900, #1500, #2500
