Rubber Tapping Knife

Rubber mechanism blade usually is special-shaped blade, such as various tooth-shaped slitting knife, bowl-shaped knife and stripe-shaped knife.

Used in paper mills & plywood industries

Minal Brand Heavy duty High speed autometic paper roll to sheet cutting machine with 2 H.P. Indection motor with gear box on feeder roll. The machine is available to cut paper of 50 GSM to 500 GSM easily. Machine is availabale to cut 300 MM to 2000 MM. Both side Cover Attachment is Included in the Machine. Delivery board with Drop down auto stacker 5 mm plate thikness, 4ft pallate hight, jogger system and Pallet Easy Out put With Hand trolly providing with the machine.1 roll stand (1600 mm Paper roll Dia) and Brake system and leveling attachment on roll Stand. Machine speed is 145 sheets/minute. Machine Cutting Knife is made from tempered D2 material. Machines have heavy Cast Iron Wall. D-Cerl system for cutting streight paper on roll end. Bearing make SKF & HCH. Delivery belt for Down is 50mm size and upper side rubber code providing with the machine. PLC SERVO SYSTEM SPECIFICATIONS AS BELOW : 2 K.W. Servo Motor on Knife rotor. HMI Delta make, Encoder : 16000 ppr, Switchgear Delta make, SMPS. Extra instruments for Developed panels. All other Spare meterial & accessories.

CDS series of single-shaft shredders are widely uesd in the plastic materials, such as headstock, thick-wall plastic sheet, pipe, hollow plastic products, chemical blue bucket, plastic tray, rubber, film, nets, carpets, wood, kitchen and domestic garbage, we can also customize the special models basis on customer demand,. Adopt PLC can automatically control, stop, reverse and overload automatic reverse. With speed, high torque, low noise and so on.
Main features:
No. 1 Spindle Rotor: According to different materials, the spindle rotor use rotor arrangement to form a different rotor. The knife can be used symmetrically.
No 2 External bearing housings: Housing installed outside of main body, adopt wool felt seal between the spindle and the box, effectively prevent the crushed material into the bearing box to improve bearing life
No. 3 Exchange screen by hydraulic press: Automatic opening and closing by hydraulic, to provide fast for exchange net and save the maintenace time.

Ethephon

Other chemical names:
Dichloethyl phosphonic acid, dichloethane phosphonic acid, cepa, cepha, camposan, cerone, florel, ethrel.

Specification:
Commodity

Specification
Ethephon 1.25%ethephon 2.5% ethephon 5%
Purity1.25% min2.5% min5% min
Pigment0.02% max0.02% max0.02% max
Colorant1.6 max1.6 max1.6 max
Thickener substance5% max5% max5% max

Dosage:
Depend on tap schedule, style, time and the age of rubber tree
ethephon 1.25% may be used around 0.5g û 0.7g/tree/time enough.
ethephon 2.5% may be used around 0.5g û 1g/tree/time enough.
ethephon 5% may be used around 0.7g û 1g/tree/time enough.

Packing:
Ethephon will be packed as the most suitable of customerÆs requires as the follows:
ò0.5 kg/bottle
ò1 kg/bottle
ò20 kgs/polycan
ò25 kgs/polycan


0, 5kg/jar; 1kg/jar; 25kgs/can

Expansion Springs are used in conjunction with metal banding also referred to as Breather springs or Chill springs. By affixing to the banding they allow the banding to expand and contract where required. These are widely used over metal jacketing for oil and gas pipework.

Expansion springs are designed for 19mm (3/4 Inch) banding simply attached to banding/¬strapping with stainless steel wing seals. The banding is slipped through the seal and then through the spaced opening at either end of the spring.

Expansion springs are manufactured in standard size of 2 Inch (50 mm) and 4 Inch (100 mm) in Stainless Steel grade SS304, SS 316, and SS316L. Other sizes available on request