Premelted Calcium Aluminate Refining Slag

Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry.

The level of Fe% in the slag has been estimated by water displacement test.

This material con offer competitive advantages respect other metal scraps:
Price;
Stable Chemistry;

The material can be loaded loose in 20 heavy duty container.

For further details feel free to contact us.

We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag

- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)

The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us

This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel.

Physical Description
On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm

Chemical Composition
Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%.

Packing: Loose in container

Loading: in 20 Container

For further information, please feel free to contact us.

We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
:
1. >85% Fe Average 600mm Max Fraction
2. >78% Fe Average 20-300mm Fraction

The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact

CHEMICAL COMPOSITION ELEMENTS CaO% MgO% SiO2% Al2O3% TFe% MnO% Cr2O3% P2O5% S%
MIN 24.00 3.50 10.00 2.00 11.00 0.02 0.00 0.02 0.05
MAX 49.00 25.00 28.00 12.00 36.00 2.50 0.80 0.42 0.20
TYPICAL 39.20 12.20 16.80 4.60 21.70 1.25 0.12 0.28 0.12

PHYSICAL APPEARANCE ASPECT
Agglomerate materials COLOR Gray blackish color

CHEMICAL BEHAVIOR
The basicity of the slag is normally fixed by the amount of lime and calcinated dolomite added, the silicon and aluminum levels of the hot metal and steel scrap charged as well as ferro-alloys.

Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;

NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.

We are supplier and exporter of Copper Slag.

Copper slag is a low cost expendable abrasive suited for open blast cleaning and due to its low silica content it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. It is available in various sizes

Copper slag is abrasive blasting grit made of granulated slag from metal smelting processes (also called iron silicate). Copper slag abrasive is suitable for blast cleaning of steel and stone/concrete surfaces, removal of mill scale, rust, old paint, dirt etc. Suitable for SA-3, SA-2 and SA-2. Copper slag blasting media/grit is manufactured of the granulated slag of copper refineries, and used for blast-cleaning of metal surface. In different industries it is called different names abrasive powder, grit, copper slag grit, mineral grit, grinding grains, etc.

ggbfs or steel slag

Characteristics of sintered calcium aluminate: 1) Uniform chemical composition, low melting point and fast melting speed can shorten the refining time; 2) No fluorine, no erosion of furnace lining and ladle; 3) Compact structure, no water absorption, easy storage and transportation; 4) Due to the stable phase and fast slag formation, it can reduce the dust pollution to the iron and steel plant and comprehensively stabilize the refining process; 5) It does not contain impurities such as hydrogen, nitrogen and carbon, which is conducive to improving the quality of steel. Sintered calcium aluminate (premelted aluminum calcium slag) is mainly used in LF furnace, open hearth furnace and converter ladle refining to remove impurities such as sulfur and oxygen in molten steel and reduce the content of harmful elements and impurities in steel. It is suitable for ordinary carbon steel, high carbon steel, high and low alloy steel.