Kneader Force Feeder Twin Screw Extruder

Conical twin screw force feeder

Description of Conical twin screw force feeder:
We sincerely advise you GS-100 conical twin screw force feeder.
It can be connected with twin screw extruder, single screw extruder, rolls calendar and so on.
Conical twin screw force feeder has many advantages, such as: low rotating speed, stable and steady working, high output, fully automatic etc.
It is very hot because of saving labors and cost.


2. The detailed information of Conical twin screw force feeder:
Motor: 11kw, WNM brand. It uses ABB AC frequency convertor.
Capacity: 350-1000kg/h.
Reducer: cycloid pin gear reducer, using GUOMAO brand.

3. Advantages of conical twin screw force feeder:
1)Conical twin screw force feeder is specially designed to feed big block and dough material.
2)The block material coming from kneader used to be cold then cut by hand. It wastes too much time, labor and cost.
3)While conical twin screw force feeder can solve this problem. You dont have to cut the block coming from the kneader, just using the conveyor sent the block to the conical twin screw force feeder, then it will extrude the material into single screw extruder, twin screw extruder, calendar and so on.
4)Conical twin screw force feeder saves too much time, cost and at least 2 workers for you company, whats more, it has better stability, lower maintenance, easier operation and higher capacity.

5. Suitable machine for conical twin screw force feeder:
1)Conical twin screw force feeder used on big block material or big size things. It can demand many kinds of materials which other feeders cant.
2)Conical twin screw force feeder matches the kneader. The common combinations are: kneader+ conical twin screw force feeder+ single screw extruder, kneader + conical twin screw force feeder+ twin screw extruder, Kneader+ conical twin screw extruder +mother and baby two stage compounding line.

7. Packaging and shipping of conical twin screw force feeder:
a. The delivery time: within 30days.
b. It will be packaged into wooden cases one by one. Before the wooden cases, it will be wrapped with PE film. The normal size is 2m/2m/3.5m.
c. Shipping port: Nanjing or Shanghai.

3. Suitable machine for Conical force feeder for extruder:
Conical force feeder for extruder used on big block material or big size things. Conical force feeder for extruder can demand many kinds of materials which other feeders cant.
Conical force feeder for extruder matches the kneader. The common combinations are:
kneader+ Conical force feeder for extruder+ single screw extruder, kneader + Conical force feeder for extruder+ twin screw extruder, Kneader+ Conical force feeder for extruder+mother and baby two stage compounding line.

4. Suitable material for Conical force feeder for extruder:
Conical force feeder for extruder mainly used in high filler master batch, Caco3 master batch, cable material, black master batch, color master batch, carbon black master batch, rubber etc.

1. Spring washers
2. Wave washers
3. Plain washers : m.S. , s.S
4. Lock washers : internal & external tooth
5. Copper washer

1. Wire rings
2. Wire clamps
3. Bottle holder
4. Any wire forming component

1. Snap rings
2. Circlips - external & internal
3. E-clips

Spring band clamps of dia 10 mm to 100 mm

1. Nut clamp
2. Nail clamp
3. Shuttering clamp

PC ABS Alloy twin screw extruder pelletizing line :
PC ABS Alloy twin screw extruder pelletizing line mainly uses: Twin screw extruder ---Water strand Cutting system.
This PC ABS Alloy twin screw extruder pelletizing line is very popular and ecomonic.

If your pigment percent is higher in your formula, you can also use: Kneader---conveyor ---force feeder ---Twin screw extruder ---cutting system.
PC ABS Alloy twin screw extruder pelletizing line has higher quality, fully automatic and better dispersion. Most advanced company use this type.


PC ABS Alloy Formula: mainly ABS/PC+ Caco3 + additives


PC ABS Alloy twin screw extruder pelletizing line After-sale service:
1. Our engineer can fly to your country to install machine for you, and tell your workers how to run the machine.
2. We will provide you some tools and spare parts.
3. Before shipping, we will run the machine for you to make sure everything is okay.

PC ABS Alloy twin screw extruder pelletizing line Capacity: Designed as customer's request. This GS-65 type can make 300kg/h.