China Dayang Stacker Parking System

A Stacker Parking System is a smart and efficient way to increase parking capacity by stacking vehicles vertically. Using mechanical lifts, cars are parked one above the other, which optimizes space and allows for multiple vehicles to occupy the same ground area.

This system is ideal for residential, commercial, and urban settings where space is limited. Its easy to operate, cost-effective, and designed with safety features, making it a practical solution for maximizing parking efficiency in congested areas.

Work Principle
This system is designed with 4 layers and multi-columns layout. Each layer is designed with a spare space as an exchanging space. All spaces can be auto-lifting freely except the spaces in the first layer and all the spaces can be auto-transverse moving except the spaces in the top layer. When a space needs to park or release a car, all spaces under the space will make a one space transverse moving to the empty space and forms a lifting channel under this space. In this case, the space will go up and down freely. When it reaches the ground, the car will go out and in freely.

Characteristics
Low area coverage and high usage rate of space.
The layers and columns will be added to raise the number of cars.
Made according to the customer's requirements.
It may be designed with full-closed style to adjust the surrounding environment.
It operates steadily without noise and with fast operating speed and short parking and releasing time.
Multi-channels safety protection and series of safety protection devices for anti-dropping, anti-crashing and anti-overloading.

This advance steel structure car parking system are widely used in residential communities, offices, universities, buses stations, hotels etc both on the ground and underground to provide special parking lots with less land and less investment.

Features:
1. Space Saving: This kind of multi-level steel structural provide more parking lots with same land area.
2. Economical: The cost of one steel structural park lot is normally no more than 20% of the land price, operation cost and maintenance cost is extremely low.
3. Technological: This kind of parking system is very reliable, automatic, efficient and safe.
4. Long life: This structure can safely operate for at least 50 years.
5. Flexibility: This kind of system is easy to install and uninstall as requested.


Package according to product size.

Work Principle


This system is designed with 3 layers and multi-columns layout. Each layer is designed with a spare space as an exchanging space. All spaces can be auto-lifting freely except the spaces in the first layer and all the spaces can be auto-transverse moving except the spaces in the top layer. When a space needs to park or release a car, all spaces under the space will make a one space transverse moving to the empty space and forms a lifting channel under this space. In this case, the space will go up and down freely. When it reaches the ground, the car will go out and in freely.


Characteristics

Low area coverage and high usage rate of space.

The layers and columns will be added to raise the number of cars according to the customer's requirements.

It may be designed with full-closed style to adjust the surrounding environment.

It operates steadily without noise and with fast operating speed and short parking and releasing time.

Multi-channels safety protection and series of safety protection devices for anti-dropping, anti-crashing and anti-overloading

Descriptions
DRP12 is the Rotary Parking System for 12 Cars or SUVs; it mainly consists of steel structure, load carrier, drive system, control system, safety and detection system.
It is the designed system that an automobile is put in the cage, the cage rotates up and down as well as right and left and then the automobile is parked.
This Automatic Parking System is designed to permit up to a maximum of 12 cars or 12 SUV's to be parked easily and safely, on the surface area required to park 2 cars. It is simple to operate with the driver parking and leaving the vehicle in the system at ground level.
Once the driver leaves the incorporated safety zone the vehicle is automatically parked by the system rotating to lift the parked car away from the bottom central position. This leaves an empty parking space available at ground level, for the next car to be parked on.

Work Principle
This system is our new designed model of parking system adopting COMB PALLETS with own power devices; designed SLIDING COMB TURNTABLE PALLET for exchange at ground level, it can take the car at any columns sliding into the entrance; Driven by large hydraulic large transmission ratio;

Parking:
Drive the car direct into entrance, the arm-bending barrier opens, drive the car into the sliding comb turntable pallet, lock the car and out of the car; Card reading or operate by manual with button space number, the sliding comb turntable pallet with the car will slide to the lifting channel; The comb lifter pallet will work and goes up to exchange the car with sliding comb turntable pallet; The comb lifter pallet lifts the car to the upper position of the parking space; The ground sliding comb turntable pallet will slide back to the parking channel position at this time; When the comb lifter pallet with the car lifts to the upper position, the comb parking pallet of the parking space slides out into the lifting channel to exchange the car with the upper comb lifter pallet; The comb lifter pallet falls down and finish the exchange with the comb parking pallet; The comb lifter pallet fall directly to the ground position and the comb parking pallet slides into the space to finish parking action;

Structures
This new designed parking system is composed of main parking structure, comb sliding turntable pallet sliding and turning system, comb lifter pallet lifting system, comb parking pallet sliding system, hydraulic pump station system, counter weight system, monitoring system, control system, etc;

Characteristics
1. The system is Dayang patent, it is the updated product of high levels puzzle parking system; it is more flexible with high usage of parking area than vertical tower parking system; it is a replacement new product of the vertical tower parking system; It is driven by hydraulic large transmission ratio. It realizes multi-columns sliding for comb exchange at ground level with pit design; This system can be designed max 35 levels based on clients requirements;

2. Less land coverage, high usage of parking area; all cars can park and retrieve from an appointed entrance; Columns and levels can be appointed by customer requirements;

3. It can be designed the entrance at bottom, middle and top position according to real site area situation and requirements;

4. Low investment solution and very low maintenance cost;

5. Steady operation, low noise, fast speed, short time of parking and retrieving;

6. Multi-ways safety protection with anti-fall devices, anti-clashing devices, anti-over loading devices;

7. Adopts hydraulic speed adjustment technology, steady and safe operation;

Specification/Additional Details
Voltage: 220-415 Volt
Body Material: Mild Steel
Frequency: 50 Hz
Usage/Application: Car Parking
Lifting Height: 1600mm/1800mm
Lifting Capacity: Up to 2500 Kg

Specification/Additional Details
Automation Grade: Automatic
Material: Mild Steel
Locking System: Fully Automatic
Usage/Application: Parking
Motor Capacity: 2.2 kW
Lowering Time: 45 sec

Specification/Additional Details
Body Material: MS
Capacity: Upto 60 Cars
Power: 35 KW
Platform Length: 4500mm~5000mm
Platform Width: 2500mm
Drive Mode: Fully Automatic