Sucker Rod Elevator Socket is used to handle single sucker rods,it is hang on the nacelle of workover rig with maximum working load 400lb.It is used for 1/2to 1 1/8 sucker rod.
1. Product performance standards: API 8A and SY / T5235.
2. Environmental conditions used Sucker Rod Elevator
a) Allows the use at a temperature of -18 â?? ~ 70 â??.
b) Meet the harsh conditions of oil field operations.
3. Sucker Rod Elevator's types: reed.
4. Material requirements: kava body is made of high-quality high-strength steel, handles made of high quality alloy forged steel.
5. Sucker Rod Elevator main technical parameters:
a) Applicable rod outer diameter: 5 / 8in ~ 1 1 / 8in.
b) Maximum load: 15t (135kN), 25t (225kN).
6. Sucker Rod Elevator major quality control requirements:
1) the chemical composition of each batch of material compliance with the relevant standards.
2) Body 10% radiographic flaw detection, high stress area to meet the requirements of grade â?¡ GB / T5677, the remaining parts of the meet GB â?¢ level requirements / T5677's.
3) Mechanical Properties Body of not less than: Rmâ?¥640 PMa, RP0.2â?¥540 PMa, Zâ?¥15%, Aâ?¥25%,AKVâ?¥42J (-20 â??).
4) product 10% for 1.5 times the testimony load test.
5) All parts for magnetic particle testing, high stress area to meet the requirements of grade â?¡ GB / T9444, the remaining parts of the meet GB â?¢ level requirements / T9444's.
6) The main products from raw materials to the carrier using the site dating back the whole process.
7. Sucker Rod Elevator structure diagram and parts list below:
CDQ (S) Sucker Rod Elevator structure diagram.
It is a lifting system developed and mounted by my company(Anruier machinery) It is driven by an electric motor to push the antenna up and down through the chain. The elevator is mainly composed of driving combination, high-precision track combination, lifting platform, fixed platform combination, control system and manual device. It has high performance to price ratio and extensibility.
The characteristics are as follows
1. Safety and self -locked: it has absolute self-locking function using trapezoidal screw drive, operation will be much more safety.
2. Automated-manual in one: it can keep a 15 minutes normal use with power failure by a manual equipment.
3. Synchronization: the single deceleration motor drives multiple push rods by mechanical coupling to achieve synchronous lifting.
4. Driving system: motor
5. Speed adjustable: variable speed motor and frequency converter can be configured to make the lifting speed adjustable.
6. Anti-misoperation : the upper and lower connection joints are equipped with anti-misoperation devices, which can prevent the unnecessary damage to the equipments lead by the forgotten locking nuts.
7. Status memory: status memory function will be available according to the requirements of customers.
8. Protection grade is high: the electric push rod is equipped with double seals to protect cylinder against dust and grease and the protection grade can reach IP55, IP56, it can work for a long time in the complex and bad environment ,maintenance-free .
9. Others: mechanism is ingenious and smart designed, the parts can be freely disassembled, the installation and maintenance are very convenient, the environmental adaptability meets the requirements of military industry standard, and the parts are universality and standardization. The accessories are rich in selection and can meet different needs.
1.high quality alloy steel processing, light weight, small size, big load, greatly reduce the work intensity.
2.composed of main parts, hand door, lock pin assembly and hand shank etc. through technological
transformation, the users can easily confirm the hand door open or not and greatly reduce the occurrence
of safety accidence.
3.double proofed safety pin has been invented after many years reaserch and practical operation, which
have obtained good reputation from the oilfield workers.
We are a professional manufacturer of oil down hole tools , high quality and reasonable price .
Elevator bolt & bulldog clamp feature a wide, countersunk flat head, a shallow conical bearing surface, a square neck, and a unified thread pitch.
They are commonly used in conveyor systems. As a steel elevator bolt supplier, AFT offers a wide range of bolt sizes including diameters ranging from 1/4â?? to 3/8â?? and lengths from 3/4â?? up to 4â??.
We are engaged in Manufacturing, Trading, Wholesaling, Distributing and Supplying of Chain Pulley Blocks, Geared Trolleys, Wire Rope, Wire Rope Slings, Chain Sling, D-Shackle, U-Clamp, Pulley Block, Eye Bolts, Chains, Thimble and Rigging Equipment
Unique double-string carrier transmission which can connect the signal inside the car with the control system and avoid the disadvantages of the slanting moving elevator on inclined elevator.Reliable signal transmission;low breakdown;no maintenance.
Imported intelligent gate opener
German imported intelligent gate opener with low breakdown.No connecting rod design which requires not too many decelerate switched;intelligent torque which ensures the opening and closing of the door more smooth, efficient and reliable.
Integrity of the signal inside the car
Dc high-performance no-maintenance accumulator helps the realization of the integrity of the signal inside the car; automatic charge to supplement energy.Inside the car, only two safe circuit related to the control system with the wire, an the illumination and ventilation inside the car are all supported by the accumulator.The emergency call is also be realized by the sound carrier technique.Choose the inclined elevator manufacturers to choose the professional.
Hi-oh10/16/20 series are spring built-in hydraulic buffers, and are used at the bottom of the shaft, if the elevator gets out of order and slides down, it will take the decelerating effect, and the knockout rod will trigger the switch, and then the safety circuit is enabled.
Oh-10:
Rated speed: less than or equal to 1.0m/s
Buffer weigh range: 300kg~2500kg
Pillar gully routing(s): 100mm
Free state (l): 388mm
A*b (mm):150*90
A*b (mm):150*90
Diameter c (mm): 14
Hydraulic oil brand: hl-46
Oil is needed: 0.48l
Oh-16:
Rated speed: less than or equal to 1.6m/s
Buffer weigh range: 700kg~5300kg
Pillar gully routing(s): 175mm
Free state (l): 625mm
A*b (mm):210*100
A*b (mm):270*150
Diameter c (mm): 18
Hydraulic oil brand: hl-46
Oil is needed: 1.7l
Oh-20
Rated speed: less than or equal to 2.0m/s
Buffer weigh range: 1000kg~5300kg
Pillar gully routing(s): 290mm
Free state (l): 915mm
A*b (mm):210*100
A*b (mm):270*160
Diameter c (mm): 18
Hydraulic oil brand: hl-46
Oil is needed: 2.6l
Goods lifts
The iso-max is a goods only lift with two fixed cabin areas of 1, 00 x 1, 40 m (capacity 300, 500, 750 and 1000 kg) or 1, 275 x 1, 50 m (capacity 750 and 1000 kg) and a variable cabin height from 1, 20 - 2, 00 m.
Lift unit complies to eu-directive for machines and has a eu-declaration of conformity of german t_v hanover / sachsen-anhalt e.V.
Compared to a similar hydraulic freight elevator the iso-max will offer you some significant advantages and savings:
Corrosion-proof
Self-supporting galvanized steel structure
Shaft pit depth 270 mm only
Machine room less lift
Accessible spaces underneath the shaft possible
Easy mounting steel shaft cladding deliverable (no fire protection)
Space saving installation - compact construction
Pre-assembled for easy installation
No brick shaft necessary
Technical information
The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details.
Structure
Steel structure, made of cold rolled galvanized special profiles
Buffer 80/80
Compensation device on suspension ropes
Baffle plater
Cabin
Cant-off system made of galvanized steel, adjustable guide shoes on both sides
Special safety gear (type tested)
Hinged doors
Manual operated hinged doors, made of galvanized steel in accordance to din 18090, production controlled by t_v-authorities
With side frames made of galvanized steel according to drawing
Door locks type-tested by t_v-authorities
Machine room door
Double hinged door with sash lock
With side frames made of galvanized steel according to drawing
Drive unit
Drive unit with standard motor ip 54 disc brake and hand wheel, 3 x 400 v /50 hz
2 chain wheels for chains 5/8" x 3/8" suspension 2:1
Controller
Call and send control with 24 v, safety circuit 230 v
Pre-wired with plugs
Adjustable and time-limited despatch delay device (1-5 s)
Electronic overload contact
Acoustic arrival signal
Position indicator on each entrance
Thermal motor protection as main switch pre-wired on control panel
Machine room light with socket
Goods lifts
ISO-MAX
Capacity: 300 / 500 / 750 / 1000 kg The ISO-MAX is a goods only lift with two fixed cabin areas of 1,00 x 1,40 m (capacity 300, 500, 750 and 1000 kg) or 1,275 x 1,50 m (Capacity 750 and 1000 kg) and a variable cabin height from 1,20 - 2,00 m
Lift unit complies to EU-Directive for machines and has a EU-Declaration of conformity of German T_V Hanover / Sachsen-Anhalt e.V.
Compared to a similar hydraulic freight elevator the ISO-MAX will offer you some significant advantages and savings:
corrosion-proof
self-supporting galvanized steel structure
shaft pit depth 270 mm only
machine room less lift
accessible spaces underneath the shaft possible
easy mounting steel shaft cladding deliverable (no fire protection)
space saving installation - compact construction
pre-assembled for easy installation
no brick shaft necessary
Technical information
The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details.
Structure
Steel structure, made of cold rolled galvanized special profiles
Buffer 80/80
Compensation device on suspension ropes
Baffle plater
Cabin
Cant-off system made of galvanized steel, adjustable guide shoes on both sides
Special safety gear (type tested)
Hinged doors
manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities
with side frames made of galvanized steel according to drawing
door locks type-tested by T_V-authorities
Machine room door
double hinged door with sash lock
with side frames made of galvanized steel according to drawing
Drive unit
Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz
2 chain wheels for chains 5/8" x 3/8" suspension 2:1
Controller
call and send control with 24 V, safety circuit 230 V
pre-wired with plugs
adjustable and time-limited despatch delay device (1-5 s)
electronic overload contact
acoustic arrival signal
position indicator on each entrance
thermal motor protection as main switch pre-wired on control panel
machine room light with socket
ISO-PM 1000
Capacity: 1000 kg
Goods lift along directive 95/28/EG with max. 2 persons
corrosion-proof
self-supporting galvanized steel structure
shaft pit depth 270 mm only
cabin push button with send control - landing push buttons with call and send control
machine room less lift
accessible spaces underneath the shaft possible
easy mounting steel shaft cladding deliverable (no fire protection)
reducing of interference prone by setting a safety feature instead of cabin door
space saving installation - compact construction
pre-assembled for easy installation
no brick shaft necessary
Technical information
The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details.
Structure
Steel structure, made of cold rolled galvanized special profiles
Buffet 80/80
Compensation device on suspension ropes
Baffle plater
Cabin
Cant-off system made of galvanized steel, adjustable guide shoes on both sides
safety light curtain
cabin light - cabin ventilation
type tested safety gear
special pushbuttons in cabin - emergency call - emergency light - prepared for outgoing emergency call
special safety gear (type tested)
special cabin apron (type tested)
Hinged doors
manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities
with side frames made of galvanized steel according to drawing
door locks type-tested by T_V-authorities
Maintenance room door
hinged door with sash lock
with side frames made of galvanized steel
Drive unit
Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V / 50 Hz
2 chain wheels for chains 5/8" x 3/8" suspension 2:1
Controller
Call and send control
Cabin push button with send control
Landing push buttons with call and send control
Micro-processor technique in controller cabinet
Selector with absolute encoder
