Please click here to check who's online and chat with them.

Gas Station Fuel Level Sensor

Supplier From China
Dec-03-19

Short Description:

CR -6062 Industrial grade fuel level transmitter (fuel level sensor) is a special instrument tailored for the accurate measurement of fuel level such as railway locomotive, automobile fuel tank, tank truck and fuel depot. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation.
Detection range: 0.05 -5m

Accuracy: 0.1, 0.2, 0.5

Pressure range: -0.1MPa-32MPa

Probe temperature resistance: -50 -250

Output signal: 4-20mA, 4-20mA superimposed HART communication, 485 communication, CAN bus communication

Power supply voltage: 12-28VDC (Intrinsically safe type needs to be powered by safety barrier)

Fixing method: Thread mounting M20Ã?1.5,M27Ã?2,M18Ã?1.5,M16Ã?1

Flange mounting DN25, DN40, DN50.

Special specifications can be customized according to requirements

Probe diameter: Φ 12 , Φ 16 , Φ 25

Explosion-proof grade: Intrinsic Exia II CT6 Explosion-proof Exd II CT5

Protection level: IP65

Intrinsic safety parameters: Ui : 28VDC , Ii : 93mA , Pi : 0.65W , Ci : 0.042uf , Li : 0mH

CR -6062 industrial grade fuel level transmitter (fuel level sensor) for occasions

CR -6062 Standard Fuel Level Transmitter (Fuel Level Sensor) Industrial grade, suitable for measurement of viscous fuel quality below 5MPA and temperature below 200, can be connected with various protocols

CR -6062 Compact fuel level transmitter (fuel level sensor) Industrial grade, suitable for measurement below 5MPA, temperature less than 200, low viscosity fuel, can be connected with various protocols

Price and Minimum Quantity

Price: Negotiable
MOQ: Not Specified

Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: Gas Station Fuel Level Sensor

Oct-26-19
 
CR -6062 Industrial grade fuel level transmitter (fuel level sensor) is a special instrument tailored for the accurate measurement of fuel level such as railway locomotive, automobile fuel tank, tank truck and fuel depot. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation.

The CR-6062 industrial grade fuel level transmitter (fuel level sensor) core components are converted to standard electrical signals (typically 4-20 mA) using advanced RF capacitance sensing circuits through 16-bit microcontrollers with precise temperature compensation and linear correction. Optional HART, CANBUS, 485 communication protocol for system configuration. The full range of transmitters are self-calibrating, allowing users to automatically calibrate zero and range with two buttons or two leads to suit different requirements in complex locations.

CR -6062 Industrial Grade Fuel Level Transmitter (Fuel Level Sensor) Working Principle

The sensing part of the CR-6062 industrial grade fuel level transmitter (fuel level sensor) is a coaxial container that causes a change in the capacitance between the sensor housing and the sensing electrode when the fuel enters the container. This variation is passed through the circuit. The conversion is performed with precise linear and temperature compensation, and a 4-20 mA standard signal is output to the display meter.

CR -6062 Industrial Grade Fuel Level Transmitter (Fuel Level Sensor) Performance Specifications

Detection range: 0.05 -5m

Accuracy: 0.1, 0.2, 0.5

Pressure range: -0.1MPa-32MPa

Probe temperature resistance: -50 -250

Output signal: 4-20mA, 4-20mA superimposed HART communication, 485 communication, CAN bus communication

Power supply voltage: 12-28VDC (Intrinsically safe type needs to be powered by safety barrier)

Fixing method: Thread mounting M20Ã?1.5,M27Ã?2,M18Ã?1.5,M16Ã?1

Flange mounting DN25, DN40, DN50.

Special specifications can be customized according to requirements

Probe diameter: Φ 12 , Φ 16 , Φ 25

Explosion-proof grade: Intrinsic Exia II CT6 Explosion-proof Exd II CT5

Protection level: IP65

Intrinsic safety parameters: Ui : 28VDC , Ii : 93mA , Pi : 0.65W , Ci : 0.042uf , Li : 0mH
GOLD Member
VERIFIED
Nov-21-20
Supplier From New Delhi, Delhi, India
GOLD Member
Jun-12-25

Gp2Y0A60Szlf Distance Sensors Dist Meas Sensor, A

$36.61 - $49.70 / Piece (EXW)
MOQ: 1  Pieces
Sample Available
 
SENSOR OPTICAL 10-150CM ANALOG
GOLD Member
VERIFIED
Oct-19-20
Supplier From Seoul, South Korea (Republic Of Korea)
GOLD Member
Jul-10-25
Supplier From Anyang-si, Gyeonggi-do, South Korea (Republic Of Korea)
 
A safety sensor mounted on the wrist area of cobots, capable of detecting surrounding people and objects in a 360-degree range
GOLD Member
Jul-10-25
Supplier From Anyang-si, Gyeonggi-do, South Korea (Republic Of Korea)
 
This is a essential Sensor set on the wrists of cobot. It makes the robot enable tool collision, tool weight compensation, force control, direct teaching tool, and object weight measurement with checking any power on senor.
GOLD Member
VERIFIED
Jul-12-24
Supplier From Mumbai, Maharashtra, India
GOLD Member
Jul-10-25
Supplier From Anyang-si, Gyeonggi-do, South Korea (Republic Of Korea)
 
Ultra-thin Joint Torque Sensor accurately and sensitively measures torque applied to robot joints,
enabling precise collision detection and torque control in a compact design.
This Ultra-thin joint torque sensor is designed to selectively measure rotational torque along a single axis by distinguishing and extracting it from external forces consisting of 3-axis forces and 3-axis moments.
It is primarily used in specialized situations where only torque needs to be extracted or in motors that generate torque.
GOLD Member
Jul-10-25
Supplier From Anyang-si, Gyeonggi-do, South Korea (Republic Of Korea)
 
This is a essential Sensor set on the wrists of cobot. It makes the robot enable tool collision, tool weight compensation, force control, direct teaching tool, and object weight measurement with checking any power on senor.

Verification Status