Hoisted Strong Permanent Magnet Separators

Magnetic Writing and Drawing Board

Material: ABS+ Magnet

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.

At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.

The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.

The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.

The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.

Please feel free to contact us for further details.

Q:how are magnets made?
¡ê¨¢¡êomodern magnet materials are made through casting, pressing and sintering, compression bonding, injection molding, extruding, or calendaring processes.
Q:how rare earth magnets are made ¡ê
¡ê¨¢¡êomining => melting => milling => aligning&pressing => sintering => inspecting => machining => plating/coating => inspecting => magnetization => packing&shipping .

Our factory produce and manufacture magnets according to customer's design on shape, dimension, grades, coatings etc. 

When inquiring, following information offered will be much appreciated .
1.Type of magnet (material & grade) 
2. Quantity (annual and per shipment) 
3. Shape and dimensions (drawing if necessary) 
4. Direction of magnetization 
5. Magnetized or not
6. Details of surface treatment 
7. Application if possible 
8. Other information or requirements 

Shape and size
Block:length x width x thickness
Disc / cylinder:diamter x thickness
Ring:external diamter x internal diameter x thickness
Segment:according to the drawing
Irregular:according to the drawing

Package:
Air package, sea package, standard package, shielding package to pass through the security at the airport.


Technical specifications of sintered neodymium magnet
Grade Remanence br
Mt (kg) Coercive force hcb
Ka/m (koe) Intrinsic coercive force hcj
Ka/m (koe) Maximum energy product bhmax
Kj/m3 (mgoe) Maximum operating temperature tw
Oc


Wooden frame and carton box

Steel products refer to solid straight steel products with a certain section shape and size, including wire, profile and plate, which are formed by plastic processing except pipes. It can be divided into hot rolling, cold bending, cold rolling, cold drawing, extrusion, forging, hot bending, welding and special rolling according to the production method. It can be divided into railway, shipbuilding, mining, structure and construction according to its use. According to the material can be divided into carbon steel, alloy steel and stainless steel. At the same time, these steel products can be reprocessed to form semi-finished products or finished products to meet special requirements. We can according to the customer's different needs, according to the drawings or samples for reprocessing production.

High quality Neodymium magnets

MaximMAGNET is a quality neodymium magnets manufacturer in Ningbo of China, she makes magnets not simply the products but a conveyor of her good service to clients. By focusing on improving clients' experience of our service MaximMAGNET is aiming to build herself a reliable brandname in magnetic industry.



Magnet Material big disc magnet, Neodymium magnets, Rare earth magnets, NdFeB big disc magnets
Max working temperature Magnet grades Max.working temperature
N33-N52 80â?? (176 â?°F)
N35M-N50M 100â?? (212 â?°F)
N30H-N48H 120â?? (248 â?°F)
N30SH-N45SH 150â?? (302 â?°F)
N28UH-N40UH 180â?? (356 â?°F)
N28EH-N38EH 200â?? (392 â?°F)
N28AH-N33AH 230â?? (446 â?°F)


Your detailed information referring to the following items will be highly appreciated and facilitate our quick and acurate offering:

1. Magnet size and shape, drawing is preferrable.
2. Magnet grade you're looking for. Consultant service available in MaximMag;

3. Coating of the magnets: NiCuNi, Epoxy, Zinc, Passivation etc.

4. Magnetized direction

5. Quantity;

6. Constant Max working temperature;

7. Your information on how you use magnets in your applications will always be appreciated.

MaximMAGNET makes quality Super strong rare earth permanent magnetic disc for different kinds of applications, we aim to build a reliable brand name in magnetic industry.


Detailed specifications:
1.Size: Custom-made as per drawings/requirements;
2.Grade: 11.7-14.8kGs magnetic residual;
3.Performance: consistent magnetic flux, high coercive force, low temperature coefficient and low irreversible magnetic losses.
4.Coatings: Ni, Zn, NiCuNi, Epoxy, Nicu+Epoxy, NiCu+Sn, Passivation, Silver, Gold, Teflon, Everlube etc.
5.Applications: Motor assemblies, Automobile, Wind turbine/Generator, MRI, Speaker, IT industry, Sensor, Communication equipments, Scanner, Camera, Home appliance and so on.

Why buy MaximMAGNET?
1. Ningo origin manufacturer;

2. Magnetic property custom made is available;

3. Low weight loss: less than HAST-5mg/cm3

4. Dy-free/less Dy content;

5. Competitive price;

6. Good thermal stability and magnetic flux consistency;

7. Good english speaking staff, offering fast and good service.

Key Advantages of Neodymium Magnet:
1. Neodymium Magnet are the most powerful commercially produced magnets.
2. Neodymium Magnet have a higher Maximum Energy Product, (BH).max, which can easily reach 30 MGOe and even goes up to 50 MGOe.
3. Neodymium Magnet can replace SmCo magnets in most cases, especially where operating temperature is less than 80 degrees Centigrade.
4. Excellent strength value.
5. Relatively low cost.
6. Compared to Alnico and SmCo magnets, relatively easy to machine


Neodymium Magnets
1. Grade: N33, N35, N38, N40, N42, N48, N50, N52 (M, H, SH, EH, UH,AH)
2. Shape: Disc, Ring, Block, Cylinder, Arcs, Customized Design (Design proper magnets for clients¡¡£¤ specific requirements)
3. Coating: Ni, Ni-Cu-Ni, Zn, Tin, Epoxy, Ni-Ag etc.
4 .Size: customized size per your requirements
5. Directions of Magnetization:
a. Oriented through Thickness
b. Axially Oriented
c. Diametrically Oriented
d. Radically Oriented
e. Customzied specific requirements magnetized
6. Quality Control: pass ISO9001:2008 and ISO14001:2004 , we will supply high quality magnet to you.
7. Application: Sintered NdFeB magnets are widely used in computers (voice coil motor of hard disc drive,pick-up of optical disk drive), speaker, telephone receiver and instrument¡¡¨¦wind generator, sensors, filters & strainers, magnetic coupling, magnetic separators,magnetic resonance image, Hi-Fi system,auto motors magnetic toy,etc.

Product description
[ctdg dry drum magnetic separator]
Brief

Ctdg dry drum magnetic separator is a new type high-efficiency magnetic preseparation equipment for materials with big size, such as lump iron ore, mill sales and other ferrous metals...

Feature
Str

Export packing , or as per customer's request

Wet Permanent Drum Magnetic Separators Are Used In Dense Media Separation (dms) Plants For The Recovery Of Magnetic Particles From The Dilute Medium. They Must Recover The Maximum Amount Of Magnetic Particles At The Highest Possible Density.
A Wet Drum Separator Consists Of A Stationary Magnet Arc Around Which A Drum Rotates. The Drum Is Partially Submerged In A Tank Which Follows The Contour Of The Drum.
Qj-ct(s/n/b)wet Permanent Drum Magnetic Separator Is A Wet-type Low-intensity Magnetic Separator With Relatively High Magnetic Field And The Most Efficient Magnetic Separation Equipment With Strong Magnetism For Minerals.
Qj-ct(s/n/b) Wet Drum Magnetic Separator Is Ideally Used To Separate Ferrous Particles From Non-ferrous Particles. This Kind Of Magnetic Separators Are Made By Us To Provide Ultimate Protection To Crushers, Grinders, Pulverizers And Allied Equipment And Is Useful For Mining And Ore Dressing Industry, And Can Be Equipped With Semi-conflow(ctb), Con-flow(ctn) And Co-flow(cts) Tanks According To Customers' Requirements.
Its Magnetic Induction Intensity Can Be Designed In Accordance With Specific Mineral Properties And Operation Processes.
Characterized By Advanced Structure, Light Weight, Reliable Operation, Easy Maintain, Serialized Products And Standardized Parts, The Wet Magnetic Drum Separator Can Meet The Needs Of Plants Indifferentsize.
Qj-ct(s/n/b) Applications:
(1) For Primary Rough Dressing And Refused Tails, Increasing Recovery Rate And Reducing The Load Of Second-stage Grinding.
(2) For Concentration Of Ferromagnetic Minerals, Increasing Ore Grade And Recovery Rate.
(3) Used Before High-magnetism Separation To Remove Ferromagnetic Minerals From The Ore And Prevent Magnetic Clogging.
(4) For Recovery Of Heavy Media At Coal Processing Plant



We Can Design As Your Require