Please click here to check who's online and chat with them.

Metal Circular Saw Machine

(1.1)
Supplier From China
Oct-15-19

Hydraulic metal cutting machine: adopt hydraulic pump as feeding power and feed via vertical track. Compared to pneumatic cutting machine, its feeding strength is heavier and its cutting is flatter and more stable. Adopt low speed cutting for saw blade rotation. It is suitable for saw cutting thick steel and stainless pipes, bars and other irregular materials and so on. High cutting precision, smooth cutting surface, burr-free and high efficiency.
1.Vertical track feeding and retracting: stable feeding, long tooling life and high cutting precision.
2.European design, multi group gears driving and be suitable for heavy cutting and stable precision.
3.Cooling cycle system (water soluble cutting liquid) makes work-piece cutting surface smooth and accurate, burr-free and prolongs using life of the saw blade. Be suitable for long-time and large amount of cutting.90°direct cutting, 90°-45° left and right bias cutting available.
Model ï¼?ZG-375SAï¼?
Sawing angle 90° 45°

Cutting capacityï¼?mmï¼?
120 100

120Ã?120 105Ã?105

150Ã?60 110Ã?60

70 60

65Ã?65 55Ã?55
Machine motor 3HP
Spindle speed 58/29R.P.M
Cooling water pump 1/8HP
Saw blade HSS OD Ï?275ã??Ï?400Ã?Shaft Ï?32ï¼?Pin hole2Ã?Ï?11Ã?63mm
The use of hydraulic pressure 25-35kg/cm²
Machine dimension Approximately 620kgs
NW/GWï¼?LÃ?WÃ?Hï¼? 1610Ã?780Ã?2130mm

Price and Minimum Quantity

Price: $9800
MOQ: Not Specified
File a complaint
Rate This Member
Supplier Of Tools & Instruments

Recent User Reviews

This user has not received any reviews yet!

Verification Status

 
 
Contact Supplier
Renew

More Items Similiar to: Metal Circular Saw Machine

GOLD Member
May-18-01
(4.6)
Buyer From Bengaluru, Karnataka, India

Supplier: Steel alloys, non ferrous metals, chemicals, machinery, power plants, universal joint shafts, gear spindle couplings, textile packaging machines
Services: Liaison representatives & service providers
Buyer: Steel alloys, non ferrous metals, industrial chemicals and machinery

Buyer Of Industrial Machinery & Plants   |   Chemicals & Allied Products   |   Ferrous Metals, Non Ferrous Metals   |   Metal Alloys
Supplier Of Automobile Gear Couplings   |   Metal Alloys

Service Provider Of Buying & Sourcing Agents   |   Automobile Gears, Shafts & Clutches   |   Packaging Machinery   |   Chemicals & Allied Products   |   Power Plants   |   Textile Machinery & Equipments   |   Ferrous Metals, Non Ferrous Metals
Oct-15-19
Copper Bar Sawing Machine

Copper Bar Sawing Machine

(1.1)
$8.65K
MOQ: Not Specified
  Dongguan Zeguan Machinery Co., Ltd.
Supplier From Dongguan, Guangdong, China
Supplier Of Tools & Instruments
 
Be suitable for sawing various irregular non-ferrous metals, aluminums, aluminum alloys, coppers, copper alloys, PVC profiles, plastics, PVC, Bakelite plates, organic glasses (acrylic sheets) and carbon fibers and so on, especially suitable for precise sawing copper and aluminum electronic components, cooling fin, sound panel, video card, network card, CPU, hard pan, MP3 aluminum case, U disk aluminum case, aluminum windows, photo frames, picture frames, light boxes, screens, display devices, furniture aluminums, extruded aluminum and profiles.
1ã??Accurate cutting angle, high precision, smooth cutting section, burr-free and high efficiency.
2ã?? Stamp foot switch to auto press and saw materials, which is safe and easy.
3ã?? Down-to-up hidden sawing mode: high security, single or multi cutting available.
4ã?? Pressing system adopts precise linear slide to drive and is controlled by independent compressed air cylinder. High pressing stability (be able to adjust pressing pressure according to material type to prevent material from damaging caused by hard pressing).
5ã?? Be able to set pressing height and speed and cutting height and speed according to material size and thickness.
6ã?? Precise compel injection system promotes lubrication and cooling effect, reduce failure rate and prolong service life of saw blade.
7ã?? 0~45 angle cutting available. Angle adjustment is easy and accurate.



Model ZG-510SA
Sawing angle +45° ~ 0°~ -45°
Blade size 20"x1" Inner hole
Saw blade 3000R.P.M.
Machine motor 5 HP
Pressure required 4-6kg/cm²
Size of Table 920x650mm
Table height 900mm
NW/GW 570 / 640kgs
Machine dimension ( LxWxH ) 1200x1090x1780mm
Packing dimension ( LxWxH ) 1320x1210x1980mm
Oct-15-19
Stage Display Equipment Sawing Machine

Stage Display Equipment Sawing Machine

(1.1)
$11.00K
MOQ: Not Specified
  Dongguan Zeguan Machinery Co., Ltd.
Supplier From Dongguan, Guangdong, China
Supplier Of Tools & Instruments
 
Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, particularly applicable to large-scale copper and aluminum electronic components, radiator, audio panels, aluminum doors and Windows, aluminum frame, light boxes, display equipment, furniture, awning room aluminum materials, aluminum formwork, aluminum extrusion and precision cutting of different profile.
1. accurate sawing Angle, high precision, smooth cutting surface without burr, high efficiency.
2. only foot switch, automatic mechanical pressure, automatic saw material is safe and easy
3. hidden saw blade from the bottom up sawing, sawing single or multiple materials at the same time
4. the pressing system is driven by precise linear sliding track and controlled by independent air pressure cylinder, with high stability of pressing material (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure)
5. press height and speed and saw cutting height and speed can be set according to material size and thickness.
6. precision forced oil injection system, improve lubrication and cooling effect, reduce failure rate and prolong blade life
7. can do ± 0~45 degrees arbitrary Angle saws, Angle adjustment convenient and accurate.


Model ZG-610SA
Sawing angle +45° ~ 0°~ -45°
Blade size 24"x1" Inner hole
Saw blade 2000R.P.M.
Machine motor 7.5 HP
Pressure required 4-6kg/cm²
Size of Table 1130x800mm
Table height 1030mm
NW/GW 790 / 870kgs
Machine dimension ( LxWxH ) 1330x1200x2000mm
Packing dimension ( LxWxH ) 1450x1320x2180mm
SILVER Member
Dec-08-23
(1.0)
Supplier From Delhi, Delhi, Pakistan

Supplier: Chemicals, minerals, agro products, steel, aluminium, copper, scaffolding products, minerals, scrap, washing machine parts, refrigerator parts, micro oven parts & auto parts.

Supplier Of Copper   |   Microwave Ovens   |   Washing Machine Parts   |   Chemicals & Allied Products   |   Ores & Minerals   |   Steel   |   Scaffolding   |   Refrigerator Parts   |   Automobile Spare Parts & Supplies
Aug-21-23
(1.0)
Supplier From Zhangjiagang, Jiangsu, China

Supplier: Electric pipe rolling tube bending machine, pipe bending machine, hydraulic pipe bending machine, pipe cutting machine, pipe shrinking machine, metal circular saw machine, chamfer machine, rolling machine and other series of pipe processing machinery.
Services: Production and export

Service Provider Of Importing/Exporting

Supplier Of Industrial Machinery & Plants   |   Electric Machines & Equipments   |   Production & Distribution Services
Oct-15-19
Aluminum Automatic Cutting Machine

Aluminum Automatic Cutting Machine

(1.1)
$11.30K
MOQ: Not Specified
  Dongguan Zeguan Machinery Co., Ltd.
Supplier From Dongguan, Guangdong, China
Supplier Of Industrial Machinery & Plants
 
The machine for cutting short material, small, large amount of development design. The saw cut surface is bright and clean without burr, without secondary processing. High efficiency, high precision, suitable for cutting various kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic, plexiglass (acrylic), carbon fiber materials, etc. Especially suitable for electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk, MP3 shell aluminum shell, U disk shell...Precision sawing.
1. Strong structure, strong rigidity, small vibration, saw blade from the top down saw cutting, saw cutting precision is high.
2. NC controller and touch screen are used for easy operation and fault detection.
3. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing.
4. Servo motor is used to drive ball screw, with an accuracy up to 0.01mm. The machine will automatically stop without material induction during the processing.
5. The clamp is designed with pressing and side clamp, which can clamp irregular materials with firm clamping.
6. Special sawing action design feeding mode :1. Step feeding 2. Reciprocating feeding 3. Manual feeding.
7. A new design and upgrading of the waste discharge and discharge system creates a clean and tidy working environment.
Model ZG-360NC
Cutting Angle 90°
Cutting ability
mm
110

105Ã?105

175Ã?50

90

80Ã?80
Machine motor 5.5HP 4P
Saw blade 2850R.P.M
Feed servo motor 1KW
Blade size Tungsten steel blade with blade tip
Ï?305ã??405Ã?Ï?25.4mm
Operating air pressure 6-8kg/cm2
Machine dimension 2000Ã?1100Ã?2006
Machine weight 960kg
Oct-15-19
Aluminum Alloy Automatic Cutting Machine

Aluminum Alloy Automatic Cutting Machine

(1.1)
$11.00K
MOQ: Not Specified
  Dongguan Zeguan Machinery Co., Ltd.
Supplier From Dongguan, Guangdong, China
Supplier Of Industrial Machinery & Plants
 
The machine for cutting short material, small, large amount of development design. The saw cut surface is bright and clean without burr, without secondary processing. High efficiency, high precision, suitable for cutting various kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic, plexiglass (acrylic), carbon fiber materials, etc. Especially suitable for electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk, MP3 shell aluminum shell, U disk shell...Precision sawing.
1. Strong structure, strong rigidity, small vibration, saw blade from the top down saw cutting, saw cutting precision is high.
2. NC controller and touch screen are used for easy operation and fault detection.
3. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing.
4. Servo motor is used to drive ball screw, with an accuracy up to 0.01mm. The machine will automatically stop without material induction during the processing.
5. The clamp is designed with pressing and side clamp, which can clamp irregular materials with firm clamping.
6. Special sawing action design feeding mode :1. Step feeding 2. Reciprocating feeding 3. Manual feeding.
7. A new design and upgrading of the waste discharge and discharge system creates a clean and tidy working environment.
Model ZG-360NC
Cutting Angle 90°
Cutting ability
mm
110

105Ã?105

175Ã?50

90

80Ã?80
Machine motor 5.5HP 4P
Saw blade 2850R.P.M
Feed servo motor 1KW
Blade size Tungsten steel blade with blade tip
Ï?305ã??405Ã?Ï?25.4mm
Operating air pressure 6-8kg/cm2
Machine dimension 2000Ã?1100Ã?2006
Machine weight 960kg
Oct-15-19
Awning Aluminum Material Cutting Machine

Awning Aluminum Material Cutting Machine

(1.1)
$11.00K
MOQ: Not Specified
  Dongguan Zeguan Machinery Co., Ltd.
Supplier From Dongguan, Guangdong, China
Supplier Of Industrial Machinery & Plants
 
Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, particularly applicable to large-scale copper and aluminum electronic components, radiator, audio panels, aluminum doors and Windows, aluminum frame, light boxes, display equipment, furniture, awning room aluminum materials, aluminum formwork, aluminum extrusion and precision cutting of different profile.
1. accurate sawing Angle, high precision, smooth cutting surface without burr, high efficiency.
2. only foot switch, automatic mechanical pressure, automatic saw material is safe and easy
3. hidden saw blade from the bottom up sawing, sawing single or multiple materials at the same time
4. the pressing system is driven by precise linear sliding track and controlled by independent air pressure cylinder, with high stability of pressing material (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure)
5. press height and speed and saw cutting height and speed can be set according to material size and thickness.
6. precision forced oil injection system, improve lubrication and cooling effect, reduce failure rate and prolong blade life
7. can do ± 0~45 degrees arbitrary Angle saws, Angle adjustment convenient and accurate.


Model ZG-610SA
Sawing angle +45° ~ 0°~ -45°
Blade size 24"x1" Inner hole
Saw blade 2000R.P.M.
Machine motor 7.5 HP
Pressure required 4-6kg/cm²
Size of Table 1130x800mm
Table height 1030mm
NW/GW 790 / 870kgs
Machine dimension ( LxWxH ) 1330x1200x2000mm
Packing dimension ( LxWxH ) 1450x1320x2180mm
Oct-15-19
45 Degrees Saw, Double Head Cutting Saw

45 Degrees Saw, Double Head Cutting Saw

(1.1)
$5.40K
MOQ: Not Specified
  Dongguan Zeguan Machinery Co., Ltd.
Supplier From Dongguan, Guangdong, China
Supplier Of Tools & Instruments
 
High spindle rotation. Cut two 45° (one 45°at left and right respectively) simultaneously with one movement. Accurate cutting angle. Smooth cutting section and burr-free. No need for secondary processing. High efficiency: 3 times of productivity of common single-head machine. Be suitable for 45°saw cutting (sliding door and window frame, photo frame, picture frame, display case, air outlet, light boxes, screens, strips, aluminum binding, extruded aluminum â?¦â?¦ ).
1. Double-pole synchronous saw cutting: cut two 45° (one 45°at left and right respectively) simultaneously with one movement and save 2/3 of time compared to general cutting.
2. Stamp foot switch to auto press and saw materials, which is safe and easy.
3. Air-pushed hydraulic saw feeding and steady cutting speed. Auto-spray atomized cutting oil during cutting to cool and lubricate saw blade to keep it clean and sharp.
4. Clamp with cylinders at top and bottom, front and back, steady materials, never deform, accurate cutting angle and pressing pressure adjustment available to prevent hollow material from deforming.
5 . 2.5*2.5m feeding and discharging rack are specially installed on right and left of the machine. Set positioning plate on discharging rack for convenience of determining cutting dimensions (transfer table is steel platform).

Model ZG-350SA2
Sawing angle 45Ã?2
Max. sawing width 90mm
Max. sawing height 140mm
Spindle speed 3300R.P.M
Saw blade tungsten steel head; alloy saw blade
Dimension of work surface 870Ã?190Ã?800mm
Machine motor 2HPÃ?2
Air pressure 6kg/cm2
Machine dimension 1410Ã?900Ã?1300
Packing dimension 1500Ã?980Ã?1420mm,2500*150*100
NW/GW 390/460kg
Search More Like "Metal Circular Saw Machine"

Verification Status

go4WorldBusiness +91-89298-00770 52B, First Floor, Okhla Phase-3 New Delhi, INDIA 110020
© go4WorldBusiness.com