Vertical Open Well Pump

APPLICATIONS : Domestic , Gardens, Irrigation, Hotels, Appartments, Agriculture and Sprinkler Irrigation

Structural Characteristics

Pump Casting : Grey Iron Casting

Impeller : Ci/gun Metal

Shaft/motor Body : Ss 410/ss 302

Thrust Bearing : Bronze/stainless Steel/carbon

Maximum Operating Conditions
Pumping Medium : Clean Water Free From Solids,
Chemically And Mechanically
Non- Aggresive

Liquid Temperature : <40° C

Ph Value : 6.85 To 8.5

TECHINICAL DATA

Power Range : 0.37 Kw -1.5 Kw

Std. Voltage : 240v To 220v / 50hz

Rating : Continous (s1)

Ins.Class : "b"

Protection : Ip 54

Speed : 2800 Rpm

Duty Type : S1 (continuous)

Nominal Pump Size 1", 1¼", 1½

Total Head Range 10m - 75m

The biggest feature of deep well pump is to make the motor and pump into one, it is immersed in the groundwater well for pumping and conveying water, a kind of pump, which is widely used in farmland irrigation and drainage, industrial and mining enterprises, urban water supply and drainage and sewage treatment. As the motor is submerged in water at the same time, the structure requirements for the motor are more special than the general motor. The structure of the motor is divided into four types: dry type, semi-dry type, oil-filled type and wet type.

Before starting the pump, the suction pipe and the pump must be filled with liquid. After the pump is turned on, the impeller rotates at a high speed, and the liquid in it rotates with the vane, and under the action of centrifugal force, it flies away from the impeller and shoots outward, and the liquid shot out in the diffusion chamber of the pump casing slows down gradually, and the pressure increases gradually, and then it flows out from the outlet of the pump and the discharge pipe. At this time, in the centre of the vane as a result of the liquid is thrown to the surrounding and the formation of neither air nor liquid vacuum low-pressure area, the liquid in the pool of liquid pool under the action of atmospheric pressure, through the suction pipe into the pump, the liquid is so continuously from the pool of liquid is pumped up and continuously from the discharge pipe out.

APPLICATIONS : Domestic , Gardens, Irrigation, Hotels, Appartments, Agriculture and Sprinkler Irrigation

Structural Characteristics

Pump Casting : Grey Iron Casting

Impeller : Ci/gun Metal

Shaft/motor Body : Ss 410/ss 302

Thrust Bearing : Bronze/stainless Steel/carbon

MAXIMUM OPERATING CONDITIONS

Pumping Medium : Clean Water Free From Solids,
Chemically And Mechanically
Non- Aggresive

Liquid Temperature <40° C

Ph Value : 6.85 To 8.5

TECHINICAL DATA

Power Range : 0.37 Kw -15 Kw

Std. Voltage : 240v To 220v / 50hz

Rating : Continous (s1)

Ins.Class : "b"

Protection : Ip 54

Speed : 2800 Rpm

Duty Type : S1 (continuous)

Nominal Pump Size : 1", 1¼", 1½", 2", 2½", 3” (del)

Total Head Range : 10.200m

APPLICATIONS : Domestic , Gardens, Irrigation, Hotels, Appartments, Agriculture and Sprinkler Irrigation

STRUCTURAL CHARACTERISTICS

Pump Casting : Grey Iron Casting

Impeller Ci/gun Metal

Shaft/motor Body Ss 410/ss 302

Thrust Bearing : Bronze/stainless Steel/carbon

MAXIMUM OPERATING CONDITIONS

Pumping Medium : Clean Water Free From Solids,
Chemically And Mechanically
Non- Aggressive

LIQUID TEMPERATURE : <40° C

Ph VALUE : 6.85 TO 8.5

TECHINICAL DATA

Power Range : 0.37 Kw -1.5 Kw

Std. Voltage : 240v To 220v / 50hz

Rating Continou :(s1)

Ins.Class : "b"

Protection : Ip 54

Speed : 2800 Rpm

Duty Type : S1 (continuous)

Nominal Pump Size : 1", 1¼", 1½", 2", 2½", 3” (del)

Total Head Range : 10m - 50m

Cast Iron Impeller
Internally mounted mechanical seal
Low power Consumption
Light in Weight-Portable
Compact Mechanical design
Better Aesthetics and Finish
Stainless Steel body
Carbon Bearing Bushes
Stainless Steel thrust ring

Operating Conditions
Clean water not containing abrasive particles
Liquid temperature up to 35¦ C
The cooling media temperature should not be more than 40¦ C

Motor
2-Pole, Single phase, 50 Hz, 220-240 V
Insulation Class B
Protection IP 57

Structural characteristics
Unique motor design (capacitor start and run type)
Cast iron impeller
Internally mounted mechanical seal
Low power consumption
Light in weight-portable
Compact mechanical design
Better aesthetics and finish
Stainless steel body
Carbon bearing bushes
Stainless steel thrust ring

Operating conditions
Clean water not containing abrasive particles
Liquid temperature up to 35ª c
The cooling media temperature should not be more than 40ª c

Motor
2-pole, single phase, 50 hz, 220-240 v
Insulation class b
Protection ip 57

YZ type liquid slurry pump is vertical single-stage single-suction cantilevered centrifugal pump structure, the impeller is semi.

Please confirm more details we will sent you price list.
1. what the water pumps head and water capacity?
2. Any request about the borehole diameter.
3. How about voltage and frequency 380V or 220V,50HZ or 60HZ?
4.Whats the temperature of water?
5. What the material, cast iron or stainless steel?


SkySeaParticipate in the formulation of national standards for submersible pumps.

FAQ & Contact us:
Q1: Are you manufacturer or a trading company?
A: We are the best manufacturer in submersible pump with a history of 70 years in China.

Q2: What are your payment terms?
A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight.

Q3: Can you do OEM?
A: Yes, we can. Any OEM is welcome.

Q4: How about MOQ?
A: Usually, it is 5 PCS for each model.

Q5: How about the delivery time?
A: Usually, 20-30 days after receiving your L/C order.

Q6: How about the warranty?
A: 1 year.

Why Choose US?
1. Specializing in manufacturing submersible pump products for 70 years.

2. The motor and pump body are self-produced on the whole line.

3. Each product is tested by 136 processes and strictly controlled by quality.

Product Description:
Submersible water pump for deep well has perfect design and resonable structure which has low noise and long lifetime, small volum, no water pollution.
Submersible water pump for deep well is widely used for deep well, farmland irrigation, spray irrigation, urban and rural industry enterprise and drainage ect.

Product Advantage:
1. High efficiency and energy saving; Save and environmental friendly.
2. Strong and durable, stable and reliable.
3. Easy to use and widely application.

Working Conditions
(1) Three-phase AC power supply of rated frequency at 50HZ and rated voltage at 380±5%V.(user voltage at 660V shall be otherwise specified)
(2) Pump inlet shall be kept below the dynamic level by 1 meter, but the submerged depth shall not exceed 70 meters below the static level. And the lower part of motor shall be kept at least 1 meter to the bottom of the well.
(3) Generally, water temperature shall not be higher than 30.
(4) Water quality requirements:
a. Sand content in water not greater than 0.01%( weight ration)
b.PH value between 6.5~8.5
c. Chlorine ion content not greater than 400mg/l

Pipeline centrifugal pumps are general-purpose equipment for conveying clear water and liquids with similar physical and chemical properties, widely used in industrial and urban water supply and drainage, high-rise building pressure boosting, fire-fighting systems, HVAC circulation and other fields [2]. According to the installation form can be divided into vertical and horizontal, according to the impeller structure is divided into closed, open and semi-open [1], the adaptable medium temperature range -20 â?? to 240 â?? [3], typical models include ISG, ISW, IRG, etc. [2] [4].
The equipment consists of impeller, pump body, sealing ring and other core components, the impeller rotates to generate centrifugal force to achieve liquid transport, the pump body plays a supporting role, and the sealing system to protect the operating vacuum. It adopts modular piping design, equipped with high-efficiency hydraulic model, supports electric drive and direct connection structure, featuring low noise, small footprint and easy maintenance. Installation requires precise calculation of suction height and ensuring pipeline sealing, and the performance curve reflects the relationship between flow rate, head and power [4]. Common faults such as air binding can be solved by filling water and exhausting air, and the bearings and sealing parts need to be overhauled regularly [2].